lkml.org 
[lkml]   [2021]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v1 7/7] usbnet: run unbind() before unregister_netdev()
On Sat, Jun 05, 2021 at 01:41:15AM +0200, Andrew Lunn wrote:
> On Fri, Jun 04, 2021 at 03:42:44PM +0200, Oleksij Rempel wrote:
> > unbind() is the proper place to disconnect PHY, but it will fail if
> > netdev is already unregistered.
>
> O.K, this partially answers the question i was about to ask for the
> previous patch.
>
> void phy_start(struct phy_device *phydev)
> {
> mutex_lock(&phydev->lock);
>
> if (phydev->state != PHY_READY && phydev->state != PHY_HALTED) {
> WARN(1, "called from state %s\n",
> phy_state_to_str(phydev->state));
> goto out;
> }
>
> By skipping phy_error(), phydev->state is not set to PHY_HALTED. So if
> you try to start the phy again, without disconnecting it, it looks
> like there could be a problem.
>
> But with this patch, i assume the PHY will always be disconnected and
> later reconnected when the device is replugged.

Yes. The PHY is disconnected and the PHY driver is unbinded.

Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

\
 
 \ /
  Last update: 2021-06-07 10:05    [W:0.190 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site