lkml.org 
[lkml]   [2021]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/4] dt-bindings: mt7621-pci: PCIe binding documentation for MT7621 SoCs
Hi Rob,

On Fri, Jun 4, 2021 at 11:32 PM Sergio Paracuellos
<sergio.paracuellos@gmail.com> wrote:
>
> Hi Rob,
>
> Thanks for the review.
>
> On Fri, Jun 4, 2021 at 9:35 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Sat, May 15, 2021 at 02:40:52PM +0200, Sergio Paracuellos wrote:
> > > Add device tree binding documentation for PCIe in MT7621 SoCs.
> > >
> > > Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > > ---
> > > .../bindings/pci/mediatek,mt7621-pci.yaml | 149 ++++++++++++++++++
> > > 1 file changed, 149 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml
> > > new file mode 100644
> > > index 000000000000..7f5f9d583032
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/pci/mediatek,mt7621-pci.yaml
> > > @@ -0,0 +1,149 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pci.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: MediaTek MT7621 PCIe controller
> > > +
> > > +maintainers:
> > > + - Sergio Paracuellos <sergio.paracuellos@gmail.com>
> > > +
> > > +description: |+
> > > + MediaTek MT7621 PCIe subsys supports single Root complex (RC)
> > > + with 3 Root Ports. Each Root Ports supports a Gen1 1-lane Link
> > > +
> > > +allOf:
> > > + - $ref: /schemas/pci/pci-bus.yaml#
> > > +
> > > +properties:
> > > + compatible:
> > > + const: mediatek,mt7621-pci
> > > +
> > > + reg:
> > > + items:
> > > + - description: host-pci bridge registers
> > > + - description: pcie port 0 RC control registers
> > > + - description: pcie port 1 RC control registers
> > > + - description: pcie port 2 RC control registers
> > > +
> > > + ranges:
> > > + maxItems: 2
> > > +
> > > + resets:
> > > + items:
> > > + - description: pcie port 0 reset.
> > > + - description: pcie port 1 reset.
> > > + - description: pcie port 2 reset.
> > > +
> > > + reset-names:
> > > + items:
> > > + - const: pcie0
> > > + - const: pcie1
> > > + - const: pcie2
> > > +
> > > + clocks:
> > > + items:
> > > + - description: pcie port 0 clock.
> > > + - description: pcie port 1 clock.
> > > + - description: pcie port 2 clock.
> > > +
> > > + clock-names:
> > > + items:
> > > + - const: pcie0
> > > + - const: pcie1
> > > + - const: pcie2
> > > +
> > > + phys:
> > > + items:
> > > + - description: Dual-ported phy for pcie port 0 and 1.
> > > + - description: Phy for pcie port 2.
> > > +
> > > + phy-names:
> > > + items:
> > > + - const: pcie-phy0
> > > + - const: pcie-phy2
> >
> > If you're going to keep the ports (and I think that's right because
> > there's only a single PCI address space AFAICT), then I think you should
> > move resets, clocks, and phys into each port node.
> >
> > So you'll need to define 'pcie@[0-2],0' node with those properties under
> > it.
>
> Ok I will move these stuff to each port node. So each port node will
> be similar to:
>
> pcie@0,0 {
> reg = <0x0000 0 0 0 0>;
> #address-cells = <3>;
> #size-cells = <2>;
> device_type = "pci";
> #interrupt-cells = <1>;
> clocks = <&clkctrl 24>;
> resets = <&rstctrl 24>;
> phys = <&pcie0_phy 1>;
> interrupt-map-mask = <0 0 0 0>;
> interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
> ranges;
> };
>
> How can I be sure by schema that the clocks, reset and phy properties
> are in each port node if I move them from the parent? By now each port
> node is just validating because of ' $ref:
> /schemas/pci/pci-bus.yaml#'.
>
> Thanks in advance for your time.
>

So I think, this should be enough:

%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/mediatek,mt7621-pci.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MediaTek MT7621 PCIe controller

maintainers:
- Sergio Paracuellos <sergio.paracuellos@gmail.com>

description: |+
MediaTek MT7621 PCIe subsys supports single Root complex (RC)
with 3 Root Ports. Each Root Ports supports a Gen1 1-lane Link

allOf:
- $ref: /schemas/pci/pci-bus.yaml#

properties:
compatible:
const: mediatek,mt7621-pci

reg:
items:
- description: host-pci bridge registers
- description: pcie port 0 RC control registers
- description: pcie port 1 RC control registers
- description: pcie port 2 RC control registers

ranges:
maxItems: 2

patternProperties:
'pcie@[0-2],0':
type: object
$ref: /schemas/pci/pci-bus.yaml#

properties:
resets:
maxItems: 1

clocks:
maxItems: 1

phys:
maxItems: 1

required:
- "#interrupt-cells"
- interrupt-map-mask
- interrupt-map
- resets
- clocks
- phys
- phy-names
- ranges

unevaluatedProperties: false

required:
- compatible
- reg
- ranges
- "#interrupt-cells"
- interrupt-map-mask
- interrupt-map
- reset-gpios

unevaluatedProperties: false

examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/mips-gic.h>

pcie: pcie@1e140000 {
compatible = "mediatek,mt7621-pci";
reg = <0x1e140000 0x100>,
<0x1e142000 0x100>,
<0x1e143000 0x100>,
<0x1e144000 0x100>;

#address-cells = <3>;
#size-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_pins>;
device_type = "pci";
ranges = <0x02000000 0 0x00000000 0x60000000 0 0x10000000>,
/* pci memory */
<0x01000000 0 0x00000000 0x1e160000 0 0x00010000>;
/* io space */
#interrupt-cells = <1>;
interrupt-map-mask = <0xF800 0 0 0>;
interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
<0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
<0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;

pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rstctrl 24>;
clocks = <&clkctrl 24>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy0";
ranges;
};

pcie@1,0 {
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rstctrl 25>;
clocks = <&clkctrl 25>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy1";
ranges;
};

pcie@2,0 {
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
resets = <&rstctrl 26>;
clocks = <&clkctrl 26>;
phys = <&pcie2_phy 0>;
phy-names = "pcie-phy2";
ranges;
};
};
...

I will send these bindings for v2 if you are ok with them.

Thanks,
Sergio Paracuellos

> Best regards,
> Sergio Paracuellos
>
> >
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - ranges
> > > + - "#interrupt-cells"
> > > + - interrupt-map-mask
> > > + - interrupt-map
> > > + - resets
> > > + - reset-names
> > > + - clocks
> > > + - clock-names
> > > + - phys
> > > + - phy-names
> > > + - reset-gpios
> > > +
> > > +unevaluatedProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/gpio/gpio.h>
> > > + #include <dt-bindings/interrupt-controller/mips-gic.h>
> > > +
> > > + pcie: pcie@1e140000 {
> > > + compatible = "mediatek,mt7621-pci";
> > > + reg = <0x1e140000 0x100>,
> > > + <0x1e142000 0x100>,
> > > + <0x1e143000 0x100>,
> > > + <0x1e144000 0x100>;
> > > +
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + pinctrl-names = "default";
> > > + pinctrl-0 = <&pcie_pins>;
> > > + device_type = "pci";
> > > + ranges = <0x02000000 0 0x00000000 0x60000000 0 0x10000000>, /* pci memory */
> > > + <0x01000000 0 0x00000000 0x1e160000 0 0x00010000>; /* io space */
> > > + #interrupt-cells = <1>;
> > > + interrupt-map-mask = <0xF800 0 0 0>;
> > > + interrupt-map = <0x0000 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>,
> > > + <0x0800 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>,
> > > + <0x1000 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
> > > + resets = <&rstctrl 24>, <&rstctrl 25>, <&rstctrl 26>;
> > > + reset-names = "pcie0", "pcie1", "pcie2";
> > > + clocks = <&clkctrl 24>, <&clkctrl 25>, <&clkctrl 26>;
> > > + clock-names = "pcie0", "pcie1", "pcie2";
> > > + phys = <&pcie0_phy 1>, <&pcie2_phy 0>;
> > > + phy-names = "pcie-phy0", "pcie-phy2";
> > > + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
> > > +
> > > + pcie@0,0 {
> > > + reg = <0x0000 0 0 0 0>;
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + device_type = "pci";
> > > + #interrupt-cells = <1>;
> > > + interrupt-map-mask = <0 0 0 0>;
> > > + interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
> > > + ranges;
> > > + };
> > > +
> > > + pcie@1,0 {
> > > + reg = <0x0800 0 0 0 0>;
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + device_type = "pci";
> > > + #interrupt-cells = <1>;
> > > + interrupt-map-mask = <0 0 0 0>;
> > > + interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
> > > + ranges;
> > > + };
> > > +
> > > + pcie@2,0 {
> > > + reg = <0x1000 0 0 0 0>;
> > > + #address-cells = <3>;
> > > + #size-cells = <2>;
> > > + device_type = "pci";
> > > + #interrupt-cells = <1>;
> > > + interrupt-map-mask = <0 0 0 0>;
> > > + interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
> > > + ranges;
> > > + };
> > > + };
> > > +...
> > > --
> > > 2.25.1

\
 
 \ /
  Last update: 2021-06-05 17:07    [W:0.516 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site