lkml.org 
[lkml]   [2021]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] arm64/dts/qcom/sc7180: Add Display Port dt node
On 2021-06-03 09:53, Bjorn Andersson wrote:
> On Thu 03 Jun 11:09 CDT 2021, Kuogee Hsieh wrote:
>
>> Add DP device node on sc7180.
>>
>> Changes in v2:
>> -- replace msm_dp with dp
>> -- replace dp_opp_table with opp_table
>>
>
> I'm sorry for those suggestions, I don't like either one of them.
>
> And for everything but changes to the DRM code the changelog goes below
> the --- line, so it's not part of the git history.
>
>> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
>> ---
>> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 9 ++++
>> arch/arm64/boot/dts/qcom/sc7180.dtsi | 78
>> ++++++++++++++++++++++++++++
>> 2 files changed, 87 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> index 24d293e..40367a2 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
>> @@ -786,6 +786,15 @@ hp_i2c: &i2c9 {
>> status = "okay";
>> };
>>
>> +&dp {
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&dp_hot_plug_det>;
>> + data-lanes = <0 1>;
>
> Is it a limitation of the EC in Trogdor that you can only do 2 lanes?

yes,

>
>> + vdda-1p2-supply = <&vdda_usb_ss_dp_1p2>;
>> + vdda-0p9-supply = <&vdda_usb_ss_dp_core>;
>> +};
>> +
>> &pm6150_adc {
>> charger-thermistor@4f {
>> reg = <ADC5_AMUX_THM3_100K_PU>;
>> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> index 6228ba2..05a4133 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
>> @@ -3032,6 +3032,13 @@
>> remote-endpoint = <&dsi0_in>;
>> };
>> };
>> +
>> + port@2 {
>> + reg = <2>;
>> + dpu_intf0_out: endpoint {
>> + remote-endpoint = <&dp_in>;
>> + };
>> + };
>> };
>>
>> mdp_opp_table: mdp-opp-table {
>> @@ -3148,6 +3155,77 @@
>>
>> status = "disabled";
>> };
>> +
>> + dp: displayport-controller@ae90000 {
>
> If you label this "mdss_dp", then it will naturally group with other
> mdss properties in trogdor.dtsi (which should be sorted
> alphabetically).
>
>> + compatible = "qcom,sc7180-dp";
>> + status = "disabled";
>> +
>> + reg = <0 0x0ae90000 0 0x1400>;
>> +
>> + interrupt-parent = <&mdss>;
>> + interrupts = <12>;
>> +
>> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>> + <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
>> + <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
>> + <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
>> + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
>> + clock-names = "core_iface", "core_aux", "ctrl_link",
>> + "ctrl_link_iface", "stream_pixel";
>> + #clock-cells = <1>;
>> + assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
>> + <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
>> + assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
>> + phys = <&dp_phy>;
>> + phy-names = "dp";
>> +
>> + operating-points-v2 = <&opp_table>;
>> + power-domains = <&rpmhpd SC7180_CX>;
>
> Just curious, but isn't the DP block in the MDSS_GDCS? Or do we need to
> mention CX here in order for the opp framework to apply required-opps
> of CX?
>
>> +
>> + #sound-dai-cells = <0>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + port@0 {
>> + reg = <0>;
>> + dp_in: endpoint {
>> + remote-endpoint = <&dpu_intf0_out>;
>> + };
>> + };
>> +
>> + port@1 {
>> + reg = <1>;
>> + dp_out: endpoint { };
>> + };
>> + };
>> +
>> + opp_table: dp-opp-table {
>
> The one and only "opp_table" of the sc7180 :)
> Maybe name it dp_opp_table instead?
>
> Regards,
> Bjorn
>
>> + compatible = "operating-points-v2";
>> +
>> + opp-160000000 {
>> + opp-hz = /bits/ 64 <160000000>;
>> + required-opps = <&rpmhpd_opp_low_svs>;
>> + };
>> +
>> + opp-270000000 {
>> + opp-hz = /bits/ 64 <270000000>;
>> + required-opps = <&rpmhpd_opp_svs>;
>> + };
>> +
>> + opp-540000000 {
>> + opp-hz = /bits/ 64 <540000000>;
>> + required-opps = <&rpmhpd_opp_svs_l1>;
>> + };
>> +
>> + opp-810000000 {
>> + opp-hz = /bits/ 64 <810000000>;
>> + required-opps = <&rpmhpd_opp_nom>;
>> + };
>> + };
>> + };
>> +
>> +
>> };
>>
>> dispcc: clock-controller@af00000 {
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project
>>

\
 
 \ /
  Last update: 2021-06-03 23:29    [W:0.139 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site