[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net-next V2 0/3] Add option to enable PHY WOL with PMT enabled

This series was applied to netdev/net-next.git (refs/heads/master):

On Tue, 29 Jun 2021 11:08:56 +0800 you wrote:
> This patchset main objective is to provide an option to enable PHY WoL even the PMT is enabled by default in the HW features.
> The current stmmac driver WOL implementation will enable MAC WOL if MAC HW PMT feature is on. Else, the driver will check for PHY WOL support.
> Intel EHL mgbe are designed to wake up through PHY WOL although the HW PMT is enabled.Hence, introduced use_phy_wol platform data to provide this PHY WOL option. Set use_phy_wol will disable the plat->pmt which currently used to determine the system to wake up by MAC WOL or PHY WOL.
> This WOL patchset includes of setting the device power state to D3hot.
> This is because the EHL PSE will need to PSE mgbe to be in D3 state in order for the PSE to goes into suspend mode.
> [...]

Here is the summary with links:
- [net-next,V2,1/3] net: stmmac: option to enable PHY WOL with PMT enabled
- [net-next,V2,2/3] stmmac: intel: Enable PHY WOL option in EHL
- [net-next,V2,3/3] stmmac: intel: set PCI_D3hot in suspend

You are awesome, thank you!
Deet-doot-dot, I am a bot.

 \ /
  Last update: 2021-06-29 20:40    [W:0.036 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site