[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v2 0/2] phy: Add support for the HDMI TX PHY on Meson8/8b/8m2
Amlogic Meson8/8b/8m2 SoCs embed a HDMI TX PHY. Unfortunately there is
no (public) documentation for this hardware. The best thing we have is
the 3.10 vendor kernel, which unfortunately doesn't document most
register bits (only a few are named there, the rest is all magic
It is possible that this is a TranSwitch HDMI TX PHY based core, but
this is pure speculation.

Adding a driver for the HDMI TX PHY gets us one step closer to video
output on these older SoCs.

Changes since v1 at [0]:
- add a reg property to the dt-bindings
- parse the reg property (register offset) in the driver
- update copyright year to 2021 (spotted by Vinod, thanks!)
- drop "default ARCH_MESON" from the Kconfig entry


Martin Blumenstingl (2):
dt-bindings: phy: Add the Amlogic Meson8 HDMI TX PHY bindings
phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2

.../phy/amlogic,meson8-hdmi-tx-phy.yaml | 55 ++++++
drivers/phy/amlogic/Kconfig | 10 ++
drivers/phy/amlogic/Makefile | 1 +
drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 162 ++++++++++++++++++
4 files changed, 228 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson8-hdmi-tx-phy.yaml
create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c


 \ /
  Last update: 2021-06-29 20:22    [W:0.082 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site