lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [BUG] btrfs potential failure on 32 core LTP test (fallocate05)
From
Date
On 29/06/2021 19:28, Josef Bacik wrote:
> On 6/29/21 1:26 PM, Krzysztof Kozlowski wrote:
>> On 29/06/2021 19:24, Josef Bacik wrote:
>>> On 6/29/21 1:00 PM, Krzysztof Kozlowski wrote:
>>>> Dear BTRFS folks,
>>>>
>>>> I am hitting a potential regression of btrfs, visible only with
>>>> fallocate05 test from LTP (Linux Test Project) only on 32+ core Azure
>>>> instances (x86_64).
>>>>
>>>> Tested:
>>>> v5.8 (Ubuntu with our stable patches): PASS
>>>> v5.11 (Ubuntu with our stable patches): FAIL
>>>> v5.13 mainline: FAIL
>>>>
>>>> PASS means test passes on all instances
>>>> FAIL means test passes on other instance types (e.g. 4 or 16 core) but
>>>> fails on 32 and 64 core instances (did not test higher),
>>>> e.g.: Standard_F32s_v2, Standard_F64s_v2, Standard_D32s_v3,
>>>> Standard_E32s_v3
>>>>
>>>> Reproduction steps:
>>>> git clone https://github.com/linux-test-project/ltp.git
>>>> cd ltp
>>>> ./build.sh && make install -j8
>>>> cd ../ltp-install
>>>> sudo ./runltp -f syscalls -s fallocate05
>>>>
>>>> Failure output:
>>>> tst_test.c:1379: TINFO: Testing on btrfs
>>>> tst_test.c:888: TINFO: Formatting /dev/loop4 with btrfs opts='' extra opts=''
>>>> tst_test.c:1311: TINFO: Timeout per run is 0h 05m 00s
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file0 size 21710183
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file1 size 8070086
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file2 size 3971177
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file3 size 36915315
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file4 size 70310993
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file5 size 4807935
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file6 size 90739786
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file7 size 76896492
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file8 size 72228649
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file9 size 36207821
>>>> tst_fill_fs.c:32: TINFO: Creating file mntpoint/file10 size 81483962
>>>> tst_fill_fs.c:59: TINFO: write(): ENOSPC (28)
>>>> fallocate05.c:81: TPASS: write() wrote 65536 bytes
>>>> fallocate05.c:102: TINFO: fallocate()d 0 extra blocks on full FS
>>>> fallocate05.c:114: TPASS: fallocate() on full FS
>>>> fallocate05.c:130: TPASS: fallocate(FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE)
>>>> fallocate05.c:134: TFAIL: write(): ENOSPC (28)
>>>>
>>>> Test code:
>>>> https://github.com/linux-test-project/ltp/blob/master/testcases/kernel/syscalls/fallocate/fallocate05.c#L134
>>>>
>>>> See also: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1933112
>>>>
>>>> Other FS tests succeed on that machines/kernels. Other file systems
>>>> also pass - only btrfs fails. The issue was not bisected. Full test
>>>> log attached.
>>>>
>>>
>>> Also it looks like you're using a loop device, the instructions you gave me
>>> aren't complete enough for me to reproduce. What is the actual setup you are
>>> using? How big is your loop device? Is it a backing device? I had to do -b
>>> <device> to get the test to even start to run, but I've got a 2tib ssd, am I
>>> supposed to be using something else? Thanks,
>>
>> The test takes care about loop device, nothing is needed from your side.
>> Just run the test and wait till you see:
>> "tst_test.c:1379: TINFO: Testing on btrfs"
>>
>> That's where the interesting part starts :)
>>
>
> *cough*
> # CONFIG_BLK_DEV_LOOP is not set
> *cough*
>
> I think I found the problem, my bad,
>

Minor update - it's not only Azure's. AWS m5.8xlarge and m5.16xlarge (32
and 64 cores) fail similarly. I'll try later also QEMU machines with
different amount of CPUs.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2021-06-29 20:07    [W:0.098 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site