lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Re: [PATCH] spi: atmel: Fix CS and initialization bug
Date
On 6/29/21 10:07 AM, Mark Brown wrote:
> On Tue, Jun 29, 2021 at 05:01:57PM +0000, Dan.Sneddon@microchip.com wrote:
>> On 6/29/21 9:47 AM, Mark Brown wrote:
>
>> >In what way does it do that? I can't tell what the patch is supposed >to
>> >do.
>
>> The SPI_MASTER_GPIO_SS flag has to be set so that the set_cs function
>> gets called even when using gpio cs pins.
>
> This all needs to be clear in the changelog.

I'll update the commit message.

>
>> >> - enable =3D (!!(spi->mode & SPI_CS_HIGH) =3D=3D enable);
>> >> =20
>> >> - if (enable) {
>> >> + if ((enable && (spi->mode & SPI_CS_HIGH))
>> >> + || (!enable && !(spi->mode & SPI_CS_HIGH))) {
>
>> >This looks especially suspicious.
>
>> It's due to the fact that the spi core tells set_cs if the cs should be
>> high or low, not active or disabled. This logic is to convert from
>> high/low to active/disabled.
>
> spi_set_cs() handles SPI_CS_HIGH... this looks like a separate existing
> driver bug, it should just be ignoring SPI_CS_HIGH if it's providing a
> set_cs() operation and letting the core implement SPI_CS_HIGH for it. I
> only checked breifly but it looks like spi-atmel is trying to use the
> core support for chipselect handling here.
>



\
 
 \ /
  Last update: 2021-06-29 19:53    [W:0.380 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site