lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 05/14] scsi: mpt3sas: Use irq_set_affinity_and_hint
Date
The driver uses irq_set_affinity_hint() specifically for the high IOPS
queue interrupts for two purposes:

- To set the affinity_hint which is consumed by the userspace for
distributing the interrupts

- To apply an affinity that it provides

The driver enforces its own affinity to bind the high IOPS queue interrupts
to the local NUMA node. However, irq_set_affinity_hint() applying the
provided cpumask as an affinity (if not NULL) for the interrupt is an
undocumented side effect.

To remove this side effect irq_set_affinity_hint() has been marked
as deprecated and new interfaces have been introduced. Hence, replace the
irq_set_affinity_hint() with the new interface irq_set_affinity_and_hint()
that clearly indicates the purpose of the usage and is meant to apply the
affinity and set the affinity_hint pointer. Also, replace
irq_set_affinity_hint() with irq_update_affinity_hint() when only
affinity_hint needs to be updated.

Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 5779f313f6f8..d07cf66ecf09 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2990,6 +2990,7 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc)
static void
_base_free_irq(struct MPT3SAS_ADAPTER *ioc)
{
+ unsigned int irq;
struct adapter_reply_queue *reply_q, *next;

if (list_empty(&ioc->reply_queue_list))
@@ -2997,9 +2998,10 @@ _base_free_irq(struct MPT3SAS_ADAPTER *ioc)

list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) {
list_del(&reply_q->list);
- if (ioc->smp_affinity_enable)
- irq_set_affinity_hint(pci_irq_vector(ioc->pdev,
- reply_q->msix_index), NULL);
+ if (ioc->smp_affinity_enable) {
+ irq = pci_irq_vector(ioc->pdev, reply_q->msix_index);
+ irq_update_affinity_hint(irq, NULL);
+ }
free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index),
reply_q);
kfree(reply_q);
@@ -3055,16 +3057,13 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index)
* @ioc: per adapter object
*
* The enduser would need to set the affinity via /proc/irq/#/smp_affinity
- *
- * It would nice if we could call irq_set_affinity, however it is not
- * an exported symbol
*/
static void
_base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
{
- unsigned int cpu, nr_cpus, nr_msix, index = 0;
+ unsigned int cpu, nr_cpus, nr_msix, index = 0, irq;
struct adapter_reply_queue *reply_q;
- int local_numa_node;
+ const struct cpumask *mask;

if (!_base_is_controller_msix_enabled(ioc))
return;
@@ -3087,11 +3086,11 @@ _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc)
* corresponding to high iops queues.
*/
if (ioc->high_iops_queues) {
- local_numa_node = dev_to_node(&ioc->pdev->dev);
+ mask = cpumask_of_node(dev_to_node(&ioc->pdev->dev));
for (index = 0; index < ioc->high_iops_queues;
index++) {
- irq_set_affinity_hint(pci_irq_vector(ioc->pdev,
- index), cpumask_of_node(local_numa_node));
+ irq = pci_irq_vector(ioc->pdev, index);
+ irq_set_affinity_and_hint(irq, mask);
}
}

--
2.27.0
\
 
 \ /
  Last update: 2021-06-29 17:29    [W:0.097 / U:0.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site