lkml.org 
[lkml]   [2021]   [Jun]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2 3/5] spi: spi-altera-dfl: support n5010 feature revision
Date
> On 28/06/2021 19.39, Moritz Fischer wrote:
> > On Fri, Jun 25, 2021 at 09:42:11AM +0200, Martin Hundebøll wrote:
> >> From: Martin Hundebøll<mhu@silicom.dk>
> >>
> >> The Max10 BMC on the Silicom n5010 PAC is slightly different than the
> >> existing BMC's, so use a dedicated feature revision detect it.
> >>
> >> Signed-off-by: Martin Hundebøll<mhu@silicom.dk>
> >> ---
> >>
> >> Changes since v1:
> >> * use feature revision from struct dfl_device instead of reading it
> >> from io-mem
> >>
> >> drivers/spi/spi-altera-dfl.c | 15 +++++++++++++--
> >> 1 file changed, 13 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/drivers/spi/spi-altera-dfl.c b/drivers/spi/spi-altera-dfl.c
> >> index 3e32e4fe5895..f6cf7c8d9dac 100644
> >> --- a/drivers/spi/spi-altera-dfl.c
> >> +++ b/drivers/spi/spi-altera-dfl.c
> >> @@ -111,6 +111,13 @@ static struct spi_board_info m10_bmc_info = {
> >> .chip_select = 0,
> >> };
> >>
> >> +static struct spi_board_info m10_n5010_bmc_info = {
> >> + .modalias = "m10-n5010",
> >> + .max_speed_hz = 12500000,
> >> + .bus_num = 0,
> >> + .chip_select = 0,
> >> +};
> > Is there no way to query the mc for version info?
>
> Do you mean reading the BMC variant (i.e. n5010 / d5005 / n3000) from a
> register?
>
> Not in a uniform way across the different boards that I'm aware of. But
> isn't this what the DFL feature revision is meant for?

If this is used to distinguish different boards, then revision (4bits?) may not
be enough. New version DFH may be able to resolve this limitation, but it
is always encouraged to have its own method to tell if possible, not depending
on DFH, it makes this IP easy to be reused in non DFL case.

Thanks
Hao

>
> // Martin
\
 
 \ /
  Last update: 2021-06-29 16:38    [W:0.090 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site