Messages in this thread | | | Subject | Re: [PATCH v2] MIPS: Loongson64: Add Loongson-2K1000 reset support | From | zhangqing <> | Date | Mon, 28 Jun 2021 09:44:58 +0800 |
| |
On 06/28/2021 09:12 AM, Jiaxun Yang wrote: > > 在 2021/6/27 下午3:38, Qing Zhang 写道: >> Add power management register operations to support reboot and poweroff. >> >> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> >> --- >> >> v1-v2: >> - Add pm block node >> >> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> >> >> diff --git a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi >> b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi >> index 569e814def83..929e8ddf86eb 100644 >> --- a/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi >> +++ b/arch/mips/boot/dts/loongson/loongson64-2k1000.dtsi >> @@ -101,6 +101,14 @@ uart0: serial@1fe00000 { >> no-loopback-test; >> }; >> + pm: power-controller { >> + device_type = "power management"; > > Hi Qing, > > Not compatible? > > >> + reg = <0 0x1fe0700c 0 0x8>, >> + <0 0x1fe07014 0 0x8>, >> + <0 0x1fe07030 0 0x8>; >> + reg-names = "pm1_sts", "pm1_cnt", "rst_cnt"; >> + }; >> + >> pci@1a000000 { >> compatible = "loongson,ls2k-pci"; >> device_type = "pci"; >> diff --git a/arch/mips/loongson64/reset.c b/arch/mips/loongson64/reset.c >> index c97bfdc8c922..ea125e925d44 100644 >> --- a/arch/mips/loongson64/reset.c >> +++ b/arch/mips/loongson64/reset.c >> @@ -10,6 +10,7 @@ >> #include <linux/delay.h> >> #include <linux/init.h> >> #include <linux/kexec.h> >> +#include <linux/of_address.h> >> #include <linux/pm.h> >> #include <linux/slab.h> >> @@ -20,12 +21,50 @@ >> #include <loongson.h> >> #include <boot_param.h> >> +static char *pm_reg_name[] = {"pm1_sts", "pm1_cnt", "rst_cnt"}; >> + >> +static void __iomem *get_reg_byname(struct device_node *node, const >> char *name) >> +{ >> + int index = of_property_match_string(node, "reg-names", name); >> + >> + if (index < 0) >> + return NULL; >> + >> + return of_iomap(node, index); >> +} > > We do have that helper in of_address.h. > > Btw, I'd prefer make it as a driver in driver/platform/mips. > > Also the approach using PRID to tell protocol type doesn't really make > sense to me. > > You can override _machine_restart callback in diver once FDT node is > found.
Hi jiaxun,
Thanks for your suggestion, I will send v3 in the soon.
Thanks.,
Qing > > Thanks. > > - Jiaxun > >> + >> +static int __init loongson_fdt_reset_init(void) >> +{ >> + struct device_node *np; >> + int i; >> + >> + np = of_find_node_by_type(NULL, "power management"); >> + if (!np) { >> + pr_info("Failed to get PM node\n"); >> + return -ENODEV; >> + } >> + >> + for (i = 0; i < sizeof(pm_reg_name)/sizeof(char *); i++) { >> + pm_reg_name[i] = get_reg_byname(np, pm_reg_name[i]); >> + if (!pm_reg_name[i]) >> + iounmap(pm_reg_name[i]); >> + } >> + >> + of_node_put(np); >> + return 0; >> +} >> +arch_initcall(loongson_fdt_reset_init); >> + >> static void loongson_restart(char *command) >> { >> + if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) { >> + writel(0x1, (void *)pm_reg_name[2]); >> + } else { >> + void (*fw_restart)(void) = (void >> *)loongson_sysconf.restart_addr; >> - void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr; >> + fw_restart(); >> + } >> - fw_restart(); >> while (1) { >> if (cpu_wait) >> cpu_wait(); >> @@ -34,9 +73,18 @@ static void loongson_restart(char *command) >> static void loongson_poweroff(void) >> { >> - void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr; >> + if ((read_c0_prid() & PRID_IMP_MASK) == PRID_IMP_LOONGSON_64R) { >> + /* Clear */ >> + writel((readl((void *)pm_reg_name[0]) & 0xffffffff), (void >> *)pm_reg_name[0]); >> + /* Sleep Enable | Soft Off*/ >> + writel(GENMASK(12, 10)|BIT(13), (void *)pm_reg_name[1]); >> + } else { >> + >> + void (*fw_poweroff)(void) = (void >> *)loongson_sysconf.poweroff_addr; >> + >> + fw_poweroff(); >> + } >> - fw_poweroff(); >> while (1) { >> if (cpu_wait) >> cpu_wait();
| |