lkml.org 
[lkml]   [2021]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: everest: Add phase corrections for eMMC
Date
The values were determined experimentally via boot tests, not by
measuring the bus behaviour with a scope. We plan to do scope
measurements to confirm or refine the values and will update the
devicetree if necessary once these have been obtained.

However, with the patch we can write and read data without issue, where
as booting the system without the patch failed at the point of mounting
the rootfs.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 3295c8c7c05c..3274a1f9047f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -1070,6 +1070,7 @@ &pinctrl_emmc_default {

&emmc {
status = "okay";
+ clk-phase-mmc-hs200 = <180>, <180>;
};

&fsim0 {
--
2.30.2
\
 
 \ /
  Last update: 2021-06-28 03:37    [W:0.018 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site