lkml.org 
[lkml]   [2021]   [Jun]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 3/3] clk: meson: regmap: switch to determine_rate for the dividers
Date
This increases the maxmium supported frequency on 32-bit systems from
2^31 (signed long as used by clk_ops.round_rate, maximum value:
approx. 2.14GHz) to 2^32 (unsigned long as used by
clk_ops.determine_rate, maximum value: approx. 4.29GHz).
On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are
capable of running at up to 2.97GHz. So switch the divider
implementation in clk-regmap to clk_ops.determine_rate to support these
higher frequencies on 32-bit systems.

Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/clk/meson/clk-regmap.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/meson/clk-regmap.c b/drivers/clk/meson/clk-regmap.c
index dcd1757cc5df..8ad8977cf1c2 100644
--- a/drivers/clk/meson/clk-regmap.c
+++ b/drivers/clk/meson/clk-regmap.c
@@ -75,8 +75,8 @@ static unsigned long clk_regmap_div_recalc_rate(struct clk_hw *hw,
div->width);
}

-static long clk_regmap_div_round_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long *prate)
+static int clk_regmap_div_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
@@ -87,18 +87,17 @@ static long clk_regmap_div_round_rate(struct clk_hw *hw, unsigned long rate,
if (div->flags & CLK_DIVIDER_READ_ONLY) {
ret = regmap_read(clk->map, div->offset, &val);
if (ret)
- /* Gives a hint that something is wrong */
- return 0;
+ return ret;

val >>= div->shift;
val &= clk_div_mask(div->width);

- return divider_ro_round_rate(hw, rate, prate, div->table,
- div->width, div->flags, val);
+ return divider_ro_determine_rate(hw, req, div->table,
+ div->width, div->flags, val);
}

- return divider_round_rate(hw, rate, prate, div->table, div->width,
- div->flags);
+ return divider_determine_rate(hw, req, div->table, div->width,
+ div->flags);
}

static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -123,14 +122,14 @@ static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate,

const struct clk_ops clk_regmap_divider_ops = {
.recalc_rate = clk_regmap_div_recalc_rate,
- .round_rate = clk_regmap_div_round_rate,
+ .determine_rate = clk_regmap_div_determine_rate,
.set_rate = clk_regmap_div_set_rate,
};
EXPORT_SYMBOL_GPL(clk_regmap_divider_ops);

const struct clk_ops clk_regmap_divider_ro_ops = {
.recalc_rate = clk_regmap_div_recalc_rate,
- .round_rate = clk_regmap_div_round_rate,
+ .determine_rate = clk_regmap_div_determine_rate,
};
EXPORT_SYMBOL_GPL(clk_regmap_divider_ro_ops);

--
2.32.0
\
 
 \ /
  Last update: 2021-06-28 00:41    [W:0.214 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site