lkml.org 
[lkml]   [2021]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 4/6] drivers: soc: xilinx: add xilinx event management driver
Date
Hi,

Thanks for the review.

> -----Original Message-----
> From: Michal Simek <michal.simek@xilinx.com>
> Sent: Monday, June 21, 2021 5:26 PM
> To: Abhyuday Godhasara <agodhasa@xilinx.com>; Michal Simek
> <michals@xilinx.com>
> Cc: Rajan Vaja <RAJANV@xilinx.com>; Manish Narani <MNARANI@xilinx.com>;
> zou_wei@huawei.com; Amit Sunil Dhamne <amitsuni@xlnx.xilinx.com>; Sai
> Krishna Potthuri <lakshmis@xilinx.com>; Jiaying Liang <jliang@xilinx.com>;
> linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; Tejas Patel
> <tejasp@xlnx.xilinx.com>
> Subject: Re: [PATCH 4/6] drivers: soc: xilinx: add xilinx event management
> driver
>
>
>
> On 5/28/21 5:59 PM, Abhyuday Godhasara wrote:
> > Xilinx event management driver provide an interface to subscribe or
> > unsubscribe for the event/callback supported by firmware. Agent can
> > use this driver to register for Error Event, Device Event and Suspend callback.
> > This driver only allow one agent per event to do registration. Driver
> > will return an error in case of multiple registration for the same event.
> >
> > This driver gets notification from firmware through ATF as SGI. During
> > initialization, event manager driver register handler for SGI used for
> > notification. It also provide SGI number info to ATF by using
> > IOCTL_REGISTER_SGI call to ATF.
> >
> > After receiving notification from firmware, driver makes SMC call to
> > ATF to get IPI data. From the IPI data provided by ATF, event manager
> > identified cause of event and forward that event/callback notification
> > to respective subscribed driver. After this, in case of Error Event,
> > driver performs unregistration as firmware expecting from agent to do
> > re-registration if agent wants to get notified on second occurrence of
> > error event.
> >
> > Add new IOCTL id IOCTL_REGISTER_SGI = 25 which use to register SGI on ATF.
>
> nit: Instead of ATF you should use TF-A
>
> >
> > Older firmware doesn't have all required support for event handling
> > which is required by event manager driver. So add check for register
> > notifier version in event manager driver.
> >
> > Xilinx event management driver provide support to subscribe for
> > multiple error events with the use of Event Mask in single call of
> > xlnx_register_event(). Agent driver can provide 'Event' parameter
> > value as ORed of multiple event masks to register single callback for
> > multiple events. For example, to register callback for event=0x1 and
> > event=0x2 for the given node, agent can provide event=0x3 (0x1 | 0x2).
> > It is not possible to register multiple event for different nodes in
> > single registration call.
> >
> > Also provide support to receive multiple error events as in single
> > notification from firmware and then forward it to subscribed drivers
> > via registered callback one by one.
> >
> > Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
> > Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
> > Signed-off-by: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
> > ---
> > MAINTAINERS | 6 +
> > drivers/soc/xilinx/Kconfig | 10 +
> > drivers/soc/xilinx/Makefile | 1 +
> > drivers/soc/xilinx/xlnx_event_manager.c | 598
> ++++++++++++++++++++++++++++
> > include/linux/firmware/xlnx-event-manager.h | 36 ++
> > include/linux/firmware/xlnx-zynqmp.h | 2 +
> > 6 files changed, 653 insertions(+)
> > create mode 100644 drivers/soc/xilinx/xlnx_event_manager.c
> > create mode 100644 include/linux/firmware/xlnx-event-manager.h
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS index 3a2384e..6299069 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -20096,6 +20096,12 @@ T: git https://github.com/Xilinx/linux-
> xlnx.git
> > F: Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> > F: drivers/phy/xilinx/phy-zynqmp.c
> >
> > +XILINX EVENT MANAGEMENT DRIVER
> > +M: Abhyuday Godhasara <abhyuday.godhasara@xilinx.com>
> > +S: Maintained
> > +F: drivers/soc/xilinx/xlnx_event_manager.c
> > +F: include/linux/firmware/xlnx-event-manager.h
> > +
> > XILLYBUS DRIVER
> > M: Eli Billauer <eli.billauer@gmail.com>
> > L: linux-kernel@vger.kernel.org
> > diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
> > index 53af911..8a755a5 100644
> > --- a/drivers/soc/xilinx/Kconfig
> > +++ b/drivers/soc/xilinx/Kconfig
> > @@ -25,4 +25,14 @@ config ZYNQMP_PM_DOMAINS
> > Say yes to enable device power management through PM domains
> > If in doubt, say N.
> >
> > +config XLNX_EVENT_MANAGER
> > + bool "Enable Xilinx Event Management Driver"
> > + depends on ZYNQMP_FIRMWARE
> > + default ZYNQMP_FIRMWARE
> > + help
> > + Say yes to enable event management support for Xilinx.
> > + This driver uses firmware driver as an interface for event/power
> > + management request to firmware.
> > +
> > + If in doubt, say N.
> > endmenu
> > diff --git a/drivers/soc/xilinx/Makefile b/drivers/soc/xilinx/Makefile
> > index 9854e6f..41e585b 100644
> > --- a/drivers/soc/xilinx/Makefile
> > +++ b/drivers/soc/xilinx/Makefile
> > @@ -1,3 +1,4 @@
> > # SPDX-License-Identifier: GPL-2.0
> > obj-$(CONFIG_ZYNQMP_POWER) += zynqmp_power.o
> > obj-$(CONFIG_ZYNQMP_PM_DOMAINS) += zynqmp_pm_domains.o
> > +obj-$(CONFIG_XLNX_EVENT_MANAGER) += xlnx_event_manager.o
> > diff --git a/drivers/soc/xilinx/xlnx_event_manager.c
> > b/drivers/soc/xilinx/xlnx_event_manager.c
> > new file mode 100644
> > index 0000000..bf726ee
> > --- /dev/null
> > +++ b/drivers/soc/xilinx/xlnx_event_manager.c
> > @@ -0,0 +1,598 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Xilinx Event Management Driver
> > + *
> > + * Copyright (C) 2021 Xilinx, Inc.
> > + *
> > + * Abhyuday Godhasara <abhyuday.godhasara@xilinx.com> */
> > +
> > +#include <linux/cpuhotplug.h>
> > +#include <linux/firmware/xlnx-event-manager.h>
> > +#include <linux/firmware/xlnx-zynqmp.h> #include <linux/hashtable.h>
> > +#include <linux/interrupt.h> #include <linux/irq.h> #include
> > +<linux/irqdomain.h> #include <linux/module.h> #include
> > +<linux/of_irq.h> #include <linux/platform_device.h> #include
> > +<linux/slab.h>
> > +
> > +static DEFINE_PER_CPU_READ_MOSTLY(int, cpu_number1);
> > +
> > +static int virq_sgi;
> > +static int event_manager_availability = -EACCES;
> > +
> > +/* SGI number used for Event management driver */
> > +#define XLNX_EVENT_SGI_NUM (15)
> > +
> > +/* Max number of driver can register for same event */
> > +#define MAX_DRIVER_PER_EVENT (10U)
> > +
> > +/* Max HashMap Order for PM API feature check (1<<7 = 128) */
> > +#define REGISTERED_DRIVER_MAX_ORDER (7)
> > +
> > +#define MAX_BITS (32U) /* Number of bits available for error mask */
> > +
> > +#define FIRMWARE_VERSION_MASK (0xFFFFU)
> > +#define REGISTER_NOTIFIER_FIRMWARE_VERSION (2U)
> > +
> > +static DEFINE_HASHTABLE(reg_driver_map,
> REGISTERED_DRIVER_MAX_ORDER);
> > +static int sgi_num = XLNX_EVENT_SGI_NUM;
>
> make this module parameter with default on XLNX_EVENT_SGI_NUM.
[Abhyuday] I make sgi_num as module parameter with default value XLNX_EVENT_SGI_NUM in next patch series.

>
> > +
> > +/**
> > + * struct registered_event_data - Registered Event Data.
> > + * @key: key is the combine id(Node-Id | Event-Id) of type u64
> > + * where upper u32 for Node-Id and lower u32 for Event-
> Id,
> > + * And this used as key to index into hashmap.
> > + * @agent_data: Data passed back to handler function.
> > + * @cb_type: Type of Api callback, like PM_NOTIFY_CB, etc.
> > + * @eve_cb: Function pointer to store the callback function.
> > + * @wake: If this flag set, firmware will wakeup processor if is
> > + * in sleep or power down state.
> > + * @hentry: hlist_node that hooks this entry into hashtable.
> > + */
> > +struct registered_event_data {
> > + u64 key;
> > + enum pm_api_cb_id cb_type;
> > + void *agent_data;
> > +
> > + event_cb_func_t eve_cb;
> > + bool wake;
> > + struct hlist_node hentry;
> > +};
> > +
> > +static bool xlnx_is_error_event(const u32 node_id) {
> > + if (node_id == EVENT_ERROR_PMC_ERR1 ||
> > + node_id == EVENT_ERROR_PMC_ERR2 ||
> > + node_id == EVENT_ERROR_PSM_ERR1 ||
> > + node_id == EVENT_ERROR_PSM_ERR2)
> > + return true;
> > +
> > + return false;
> > +}
> > +
> > +static int xlnx_add_cb_for_notify_event(const u32 node_id, const u32 event,
> const bool wake,
> > + event_cb_func_t cb_fun, void
> *data)
> > +{
> > + u64 key = 0;
> > + struct registered_event_data *eve_data;
> > +
> > + key = ((u64)node_id << 32U) | (u64)event;
> > + /* Check for existing entry in hash table for given key id */
> > + hash_for_each_possible(reg_driver_map, eve_data, hentry, key) {
> > + if (eve_data->key == key) {
>
> Don't you need to check eve_data here too?
[Abhyuday] As per https://github.com/torvalds/linux/blob/44db63d1ad8d71c6932cbe007eb41f31c434d140/tools/include/linux/list.h#L714 not required to do NULL check for eve_data, As for loop will break if eve_data got as NULL.

>
> > + pr_err("Found as already registered\n");
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + /* Add new entry if not present */
> > + eve_data = kmalloc(sizeof(*eve_data), GFP_KERNEL);
> > + if (!eve_data)
> > + return -ENOMEM;
> > +
> > + eve_data->key = key;
> > + eve_data->cb_type = PM_NOTIFY_CB;
> > + eve_data->eve_cb = cb_fun;
> > + eve_data->wake = wake;
> > + eve_data->agent_data = data;
> > +
> > + hash_add(reg_driver_map, &eve_data->hentry, key);
> > +
> > + return 0;
> > +}
> > +
> > +static int xlnx_add_cb_for_suspend(event_cb_func_t cb_fun, void
> > +*data) {
> > + struct registered_event_data *eve_data;
> > +
> > + /* Check for existing entry in hash table for given cb_type */
> > + hash_for_each_possible(reg_driver_map, eve_data, hentry,
> PM_INIT_SUSPEND_CB) {
> > + if (eve_data->cb_type == PM_INIT_SUSPEND_CB) {
>
> Same as above to make sure that eve_data is not NULL.
> The same is also below.
[Abhyuday] As per https://github.com/torvalds/linux/blob/44db63d1ad8d71c6932cbe007eb41f31c434d140/tools/include/linux/list.h#L714 not required to do NULL check for eve_data, As for loop will break if eve_data got as NULL.
>
> > + pr_err("Found as already registered\n");
> > + return -EINVAL;
> > + }
> > + }
> > +
> > + /* Add new entry if not present */
> > + eve_data = kmalloc(sizeof(*eve_data), GFP_KERNEL);
> > + if (!eve_data)
> > + return -ENOMEM;
> > +
> > + eve_data->key = 0;
> > + eve_data->cb_type = PM_INIT_SUSPEND_CB;
> > + eve_data->eve_cb = cb_fun;
> > + eve_data->agent_data = data;
> > +
> > + hash_add(reg_driver_map, &eve_data->hentry,
> PM_INIT_SUSPEND_CB);
> > +
> > + return 0;
> > +}
> > +
> > +static int xlnx_remove_cb_for_suspend(event_cb_func_t cb_fun) {
> > + bool is_callback_found = false;
> > + struct registered_event_data *eve_data;
> > +
> > + /* Check for existing entry in hash table for given cb_type */
> > + hash_for_each_possible(reg_driver_map, eve_data, hentry,
> PM_INIT_SUSPEND_CB) {
> > + if (eve_data->cb_type == PM_INIT_SUSPEND_CB &&
> > + eve_data->eve_cb == cb_fun) {
> > + is_callback_found = true;
> > + /* remove an object from a hashtable */
> > + hash_del(&eve_data->hentry);
> > + kfree(eve_data);
> > + }
> > + }
> > + if (!is_callback_found) {
> > + pr_warn("Didn't find any registered callback for suspend
> event\n");
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int xlnx_remove_cb_for_notify_event(const u32 node_id, const u32
> event,
> > + event_cb_func_t cb_fun)
> > +{
> > + bool is_callback_found = false;
> > + struct registered_event_data *eve_data;
> > + u64 key = ((u64)node_id << 32U) | (u64)event;
> > +
> > + /* Check for existing entry in hash table for given key id */
> > + hash_for_each_possible(reg_driver_map, eve_data, hentry, key) {
> > + if (eve_data->key == key &&
> > + eve_data->eve_cb == cb_fun) {
> > + is_callback_found = true;
> > + /* remove an object from a hashtable */
> > + hash_del(&eve_data->hentry);
> > + kfree(eve_data);
> > + }
> > + }
> > + if (!is_callback_found) {
> > + pr_warn("Didn't find any registered callback for 0x%x 0x%x\n",
> > + node_id, event);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * xlnx_register_event() - Register for the event.
> > + * @cb_type: Type of callback from pm_api_cb_id,
> > + * PM_NOTIFY_CB - for Error Events,
> > + * PM_INIT_SUSPEND_CB - for suspend callback.
> > + * @node_id: Node-Id related to event.
> > + * @event: Event Mask for the Error Event.
> > + * @wake: Flag specifying whether the subsystem should be woken upon
> > + * event notification.
> > + * @cb_fun: Function pointer to store the callback function.
> > + * @data: Pointer for the driver instance.
> > + *
> > + * Return: Returns 0 on successful registration else error code.
> > + */
> > +int xlnx_register_event(const enum pm_api_cb_id cb_type, const u32
> node_id, const u32 event,
> > + const bool wake, event_cb_func_t cb_fun, void *data) {
> > + int ret = 0;
> > + u32 eve;
> > + int pos;
> > +
> > + if (event_manager_availability)
> > + return event_manager_availability;
> > +
> > + if (cb_type != PM_NOTIFY_CB && cb_type != PM_INIT_SUSPEND_CB) {
> > + pr_err("%s() Unsupported Callback 0x%x\n", __func__,
> cb_type);
> > + return -EINVAL;
> > + }
> > +
> > + if (!cb_fun)
> > + return -EFAULT;
> > +
> > + if (cb_type == PM_INIT_SUSPEND_CB) {
> > + ret = xlnx_add_cb_for_suspend(cb_fun, data);
> > + } else {
> > + if (!xlnx_is_error_event(node_id)) {
> > + /* Add entry for Node-Id/Event in hash table */
> > + ret = xlnx_add_cb_for_notify_event(node_id, event,
> wake, cb_fun, data);
> > + } else {
> > + /* Add into Hash table */
> > + for (pos = 0; pos < MAX_BITS; pos++) {
> > + eve = event & (1 << pos);
> > + if (!eve)
> > + continue;
> > +
> > + /* Add entry for Node-Id/Eve in hash table */
> > + ret = xlnx_add_cb_for_notify_event(node_id,
> eve, wake, cb_fun,
> > + data);
> > + /* Break the loop if got error */
> > + if (ret)
> > + break;
> > + }
> > + if (ret) {
> > + /* Skip the Event for which got the error */
> > + pos--;
> > + /* Remove registered(during this call) event
> from hash table */
> > + for ( ; pos >= 0; pos--) {
> > + eve = event & (1 << pos);
> > + if (!eve)
> > + continue;
> > +
> xlnx_remove_cb_for_notify_event(node_id, eve, cb_fun);
> > + }
> > + }
> > + }
> > +
> > + if (ret) {
> > + pr_err("%s() failed for 0x%x and 0x%x: %d\r\n",
> __func__, node_id,
> > + event, ret);
> > + return ret;
> > + }
> > +
> > + /* Register for Node-Id/Event combination in firmware */
> > + ret = zynqmp_pm_register_notifier(node_id, event, wake,
> true);
> > + if (ret) {
> > + pr_err("%s() failed for 0x%x and 0x%x: %d\r\n",
> __func__, node_id,
> > + event, ret);
> > + /* Remove already registered event from hash table */
> > + if (xlnx_is_error_event(node_id)) {
> > + for (pos = 0; pos < MAX_BITS; pos++) {
> > + eve = event & (1 << pos);
> > + if (!eve)
> > + continue;
> > +
> xlnx_remove_cb_for_notify_event(node_id, eve, cb_fun);
> > + }
> > + } else {
> > + xlnx_remove_cb_for_notify_event(node_id,
> event, cb_fun);
> > + }
> > + return ret;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(xlnx_register_event);
> > +
> > +/**
> > + * xlnx_unregister_event() - Unregister for the event.
> > + * @cb_type: Type of callback from pm_api_cb_id,
> > + * PM_NOTIFY_CB - for Error Events,
> > + * PM_INIT_SUSPEND_CB - for suspend callback.
> > + * @node_id: Node-Id related to event.
> > + * @event: Event Mask for the Error Event.
> > + * @cb_fun: Function pointer of callback function.
> > + *
> > + * Return: Returns 0 on successful unregistration else error code.
> > + */
> > +int xlnx_unregister_event(const enum pm_api_cb_id cb_type, const u32
> node_id, const u32 event,
> > + event_cb_func_t cb_fun)
> > +{
> > + int ret;
> > + u32 eve, pos;
> > +
> > + if (event_manager_availability)
> > + return event_manager_availability;
> > +
> > + if (cb_type != PM_NOTIFY_CB && cb_type != PM_INIT_SUSPEND_CB) {
> > + pr_err("%s() Unsupported Callback 0x%x\n", __func__,
> cb_type);
> > + return -EINVAL;
> > + }
> > +
> > + if (!cb_fun)
> > + return -EFAULT;
> > +
> > + if (cb_type == PM_INIT_SUSPEND_CB) {
> > + ret = xlnx_remove_cb_for_suspend(cb_fun);
> > + } else {
> > + /* Remove Node-Id/Event from hash table */
> > + if (!xlnx_is_error_event(node_id)) {
> > + xlnx_remove_cb_for_notify_event(node_id, event,
> cb_fun);
> > + } else {
> > + for (pos = 0; pos < MAX_BITS; pos++) {
> > + eve = event & (1 << pos);
> > + if (!eve)
> > + continue;
> > +
> > + xlnx_remove_cb_for_notify_event(node_id,
> eve, cb_fun);
> > + }
> > + }
> > +
> > + /* Un-register for Node-Id/Event combination */
> > + ret = zynqmp_pm_register_notifier(node_id, event, false,
> false);
> > + if (ret) {
> > + pr_err("%s() failed for 0x%x and 0x%x: %d\n",
> > + __func__, node_id, event, ret);
> > + return ret;
> > + }
> > + }
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(xlnx_unregister_event);
> > +
> > +static void xlnx_call_suspend_cb_handler(const u32 *payload) {
> > + bool is_callback_found = false;
> > + struct registered_event_data *eve_data;
> > + u32 cb_type = payload[0];
> > +
> > + /* Check for existing entry in hash table for given cb_type */
> > + hash_for_each_possible(reg_driver_map, eve_data, hentry, cb_type) {
> > + if (eve_data->cb_type == cb_type) {
> > + eve_data->eve_cb(&payload[0], eve_data-
> >agent_data);
> > + is_callback_found = true;
> > + }
> > + }
> > + if (!is_callback_found)
> > + pr_warn("Didn't find any registered callback for suspend
> event\n");
> > +}
> > +
> > +static void xlnx_call_notify_cb_handler(const u32 *payload) {
> > + bool is_callback_found = false;
> > + struct registered_event_data *eve_data;
> > + u64 key = ((u64)payload[1] << 32U) | (u64)payload[2];
> > + int ret;
> > +
> > + /* Check for existing entry in hash table for given key id */
> > + hash_for_each_possible(reg_driver_map, eve_data, hentry, key) {
> > + if (eve_data->key == key) {
> > + eve_data->eve_cb(&payload[0], eve_data-
> >agent_data);
> > + is_callback_found = true;
> > +
> > + /* re register with firmware to get future events */
> > + ret = zynqmp_pm_register_notifier(payload[1],
> payload[2],
> > + eve_data->wake,
> true);
> > + if (ret) {
> > + pr_err("%s() failed for 0x%x and 0x%x:
> %d\r\n", __func__,
> > + payload[1], payload[2], ret);
> > + /* Remove already registered event from hash
> table */
> > + xlnx_remove_cb_for_notify_event(payload[1],
> payload[2],
> > + eve_data-
> >eve_cb);
> > + }
> > + }
> > + }
> > + if (!is_callback_found)
> > + pr_warn("Didn't find any registered callback for 0x%x 0x%x\n",
> > + payload[1], payload[2]);
> > +}
> > +
> > +static void xlnx_get_event_callback_data(u32 *buf) {
> > + zynqmp_pm_invoke_fn(GET_CALLBACK_DATA, 0, 0, 0, 0, buf); }
> > +
> > +static irqreturn_t xlnx_event_handler(int irq, void *dev_id) {
> > + u32 cb_type, node_id, event, pos;
> > + u32 payload[CB_MAX_PAYLOAD_SIZE] = {0};
> > + u32 event_data[CB_MAX_PAYLOAD_SIZE] = {0};
> > +
> > + /* Get event data */
> > + xlnx_get_event_callback_data(payload);
> > +
> > + /* First element is callback type, others are callback arguments */
> > + cb_type = payload[0];
> > +
> > + if (cb_type == PM_NOTIFY_CB) {
> > + node_id = payload[1];
> > + event = payload[2];
> > + if (!xlnx_is_error_event(node_id)) {
> > + xlnx_call_notify_cb_handler(payload);
> > + } else {
> > + /*
> > + * Each call back function expecting payload as an
> input arguments.
> > + * We can get multiple error events as in one call back
> through error
> > + * mask. So payload[2] may can contain multiple error
> events.
> > + * In reg_driver_map database we store data in the
> combination of single
> > + * node_id-error combination.
> > + * So coping the payload message into event_data and
> update the
> > + * event_data[2] with Error Mask for single error event
> and use
> > + * event_data as input argument for registered call
> back function.
> > + *
> > + */
> > + memcpy(event_data, payload, (4 *
> CB_MAX_PAYLOAD_SIZE));
> > + /* Support Multiple Error Event */
> > + for (pos = 0; pos < MAX_BITS; pos++) {
> > + if ((0 == (event & (1 << pos))))
> > + continue;
> > + event_data[2] = (event & (1 << pos));
> > + xlnx_call_notify_cb_handler(event_data);
> > + }
> > + }
> > + } else if (cb_type == PM_INIT_SUSPEND_CB) {
> > + xlnx_call_suspend_cb_handler(payload);
> > + } else {
> > + pr_err("%s() Unsupported Callback %d\n", __func__, cb_type);
> > + }
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int xlnx_event_cpuhp_start(unsigned int cpu) {
> > + enable_percpu_irq(virq_sgi, IRQ_TYPE_NONE);
> > +
> > + return 0;
> > +}
> > +
> > +static int xlnx_event_cpuhp_down(unsigned int cpu) {
> > + disable_percpu_irq(virq_sgi);
> > +
> > + return 0;
> > +}
> > +
> > +static void xlnx_disable_percpu_irq(void *data) {
> > + disable_percpu_irq(virq_sgi);
> > +}
> > +
> > +static int xlnx_event_init_sgi(struct platform_device *pdev) {
> > + int ret = 0;
> > + int cpu = smp_processor_id();
> > + /*
> > + * IRQ related structures are used for the following:
> > + * for each SGI interrupt ensure its mapped by GIC IRQ domain
> > + * and that each corresponding linux IRQ for the HW IRQ has
> > + * a handler for when receiving an interrupt from the remote
> > + * processor.
> > + */
> > + struct irq_domain *domain;
> > + struct irq_fwspec sgi_fwspec;
> > + struct device_node *interrupt_parent = NULL;
> > + struct device *parent = pdev->dev.parent;
> > +
> > + /* Find GIC controller to map SGIs. */
> > + interrupt_parent = of_irq_find_parent(parent->of_node);
> > + if (!interrupt_parent) {
> > + dev_err(&pdev->dev, "Failed to find property for Interrupt
> parent\n");
> > + return -EINVAL;
> > + }
> > +
> > + /* Each SGI needs to be associated with GIC's IRQ domain. */
> > + domain = irq_find_host(interrupt_parent);
> > + of_node_put(interrupt_parent);
> > +
> > + /* Each mapping needs GIC domain when finding IRQ mapping. */
> > + sgi_fwspec.fwnode = domain->fwnode;
> > +
> > + /*
> > + * When irq domain looks at mapping each arg is as follows:
> > + * 3 args for: interrupt type (SGI), interrupt # (set later), type
> > + */
> > + sgi_fwspec.param_count = 1;
> > +
> > + /* Set SGI's hwirq */
> > + sgi_fwspec.param[0] = sgi_num;
> > + virq_sgi = irq_create_fwspec_mapping(&sgi_fwspec);
> > +
> > + per_cpu(cpu_number1, cpu) = cpu;
> > + ret = request_percpu_irq(virq_sgi, xlnx_event_handler,
> "xlnx_event_mgmt",
> > + &cpu_number1);
> > + WARN_ON(ret);
> > + if (ret) {
> > + irq_dispose_mapping(virq_sgi);
> > + return ret;
> > + }
> > +
> > + irq_to_desc(virq_sgi);
> > + irq_set_status_flags(virq_sgi, IRQ_PER_CPU);
> > +
> > + return ret;
> > +}
> > +
> > +static void xlnx_event_cleanup_sgi(struct platform_device *pdev) {
> > + int cpu = smp_processor_id();
> > +
> > + per_cpu(cpu_number1, cpu) = cpu;
> > +
> > + cpuhp_remove_state(CPUHP_AP_ONLINE_DYN);
> > +
> > + on_each_cpu(xlnx_disable_percpu_irq, NULL, 1);
> > +
> > + irq_clear_status_flags(virq_sgi, IRQ_PER_CPU);
> > + free_percpu_irq(virq_sgi, &cpu_number1);
> > + irq_dispose_mapping(virq_sgi);
> > +}
> > +
> > +static int xlnx_event_manager_probe(struct platform_device *pdev) {
> > + int ret;
> > +
> > + ret = zynqmp_pm_feature(PM_REGISTER_NOTIFIER);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "Feature check failed with %d\n", ret);
> > + return ret;
> > + }
> > +
> > + if ((ret & FIRMWARE_VERSION_MASK) <
> > + REGISTER_NOTIFIER_FIRMWARE_VERSION) {
> > + dev_err(&pdev->dev, "Register notifier version error. Expected
> Firmware: v%d - Found: v%d\n",
> > + REGISTER_NOTIFIER_FIRMWARE_VERSION,
> > + ret & FIRMWARE_VERSION_MASK);
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + /* Initialize the SGI */
> > + ret = xlnx_event_init_sgi(pdev);
> > + if (ret) {
> > + dev_err(&pdev->dev, "SGI Init has been failed with %d\n", ret);
> > + return ret;
> > + }
> > +
> > + /* Setup function for the CPU hot-plug cases */
> > + cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "soc/event:starting",
> > + xlnx_event_cpuhp_start, xlnx_event_cpuhp_down);
> > +
> > + ret = zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI,
> sgi_num,
> > + 0, NULL);
> > + if (ret) {
> > + dev_err(&pdev->dev, "SGI Registration over ATF failed with
> %d\n", ret);
> > + xlnx_event_cleanup_sgi(pdev);
> > + return ret;
> > + }
> > +
> > + event_manager_availability = 0;
> > +
> > + dev_info(&pdev->dev, "Xilinx Event Management driver probed\n");
> > +
> > + return ret;
> > +}
> > +
> > +static int xlnx_event_manager_remove(struct platform_device *pdev) {
> > + int i;
> > + struct registered_event_data *eve_data;
> > + struct hlist_node *tmp;
> > + int ret;
> > +
> > + hash_for_each_safe(reg_driver_map, i, tmp, eve_data, hentry) {
> > + hash_del(&eve_data->hentry);
> > + kfree(eve_data);
> > + }
> > +
> > + ret = zynqmp_pm_invoke_fn(PM_IOCTL, 0, IOCTL_REGISTER_SGI, 0, 1,
> NULL);
> > + if (ret)
> > + dev_err(&pdev->dev, "SGI unregistration over ATF failed with
> %d\n",
> > +ret);
> > +
> > + xlnx_event_cleanup_sgi(pdev);
> > +
> > + event_manager_availability = -EACCES;
> > +
> > + return ret;
> > +}
> > +
> > +static struct platform_driver xlnx_event_manager_driver = {
> > + .probe = xlnx_event_manager_probe,
> > + .remove = xlnx_event_manager_remove,
> > + .driver = {
> > + .name = "xlnx_event_manager",
> > + },
> > +};
> > +module_platform_driver(xlnx_event_manager_driver);
> > diff --git a/include/linux/firmware/xlnx-event-manager.h
> > b/include/linux/firmware/xlnx-event-manager.h
> > new file mode 100644
> > index 0000000..09758ab
> > --- /dev/null
> > +++ b/include/linux/firmware/xlnx-event-manager.h
> > @@ -0,0 +1,36 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +
> > +#ifndef _FIRMWARE_XLNX_EVENT_MANAGER_H_ #define
> > +_FIRMWARE_XLNX_EVENT_MANAGER_H_
> > +
> > +#include <linux/firmware/xlnx-zynqmp.h>
> > +
> > +#define CB_MAX_PAYLOAD_SIZE (4U) /*In payload maximum 32bytes
> */
> > +
> > +/************************** Exported Function
> > +*****************************/
> > +
> > +typedef void (*event_cb_func_t)(const u32 *payload, void *data);
> > +
> > +#if IS_REACHABLE(CONFIG_XLNX_EVENT_MANAGER)
> > +int xlnx_register_event(const enum pm_api_cb_id cb_type, const u32
> node_id,
> > + const u32 event, const bool wake,
> > + event_cb_func_t cb_fun, void *data);
> > +
> > +int xlnx_unregister_event(const enum pm_api_cb_id cb_type, const u32
> node_id,
> > + const u32 event, event_cb_func_t cb_fun); #else
> static inline
> > +int xlnx_register_event(const enum pm_api_cb_id cb_type, const u32
> node_id,
> > + const u32 event, const bool wake,
> > + event_cb_func_t cb_fun, void *data) {
> > + return -ENODEV;
> > +}
> > +
> > +istatic inline int xlnx_unregister_event(const enum pm_api_cb_id cb_type,
> const u32 node_id,
> > + const u32 event, event_cb_func_t
> cb_fun) {
> > + return -ENODEV;
> > +}
> > +#endif
> > +
> > +#endif /* _FIRMWARE_XLNX_EVENT_MANAGER_H_ */
> > diff --git a/include/linux/firmware/xlnx-zynqmp.h
> > b/include/linux/firmware/xlnx-zynqmp.h
> > index 06ea5a4..f3e857c 100644
> > --- a/include/linux/firmware/xlnx-zynqmp.h
> > +++ b/include/linux/firmware/xlnx-zynqmp.h
> > @@ -133,6 +133,8 @@ enum pm_ioctl_id {
> > IOCTL_READ_PGGS = 15,
> > /* Set healthy bit value */
> > IOCTL_SET_BOOT_HEALTH_STATUS = 17,
> > + /* Register SGI to ATF */
> > + IOCTL_REGISTER_SGI = 25,
> > };
> >
> > enum pm_query_id {
> >
>
> The rest looks good to me. Please push interface to TFA first to make sure that
> API won't change.
[Abhyuday] TFA changes are already merged.
>
> Thanks,
> Michal
Thanks,
Abhyuday

\
 
 \ /
  Last update: 2021-06-25 15:48    [W:0.063 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site