lkml.org 
[lkml]   [2021]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC v1 02/11] clk: qcom: rcg2: Add support for flags
On Wed, 16 Jun 2021 at 17:33, Konrad Dybcio
<konrad.dybcio@somainline.org> wrote:
>
>
> On 16.06.2021 16:10, Robert Foss wrote:
> > These changes are ported from the downstream driver, and are used on SM8350
> > for CAMCC, DISPCC, GCC, GPUCC & VIDEOCC.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > drivers/clk/qcom/clk-rcg.h | 4 ++++
> > drivers/clk/qcom/clk-rcg2.c | 3 +++
> > 2 files changed, 7 insertions(+)
> >
> > diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
> > index 99efcc7f8d88..a1f05281d950 100644
> > --- a/drivers/clk/qcom/clk-rcg.h
> > +++ b/drivers/clk/qcom/clk-rcg.h
> > @@ -149,6 +149,10 @@ struct clk_rcg2 {
> > const struct freq_tbl *freq_tbl;
> > struct clk_regmap clkr;
> > u8 cfg_off;
> > + u8 flags;
> > +#define FORCE_ENABLE_RCG BIT(0)
> > +#define HW_CLK_CTRL_MODE BIT(1)
> > +#define DFS_SUPPORT BIT(2)
> > };
> >
> > #define to_clk_rcg2(_hw) container_of(to_clk_regmap(_hw), struct clk_rcg2, clkr)
> > diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
> > index 42f13a2d1cc1..ed2c9b6659cc 100644
> > --- a/drivers/clk/qcom/clk-rcg2.c
> > +++ b/drivers/clk/qcom/clk-rcg2.c
> > @@ -295,6 +295,9 @@ static int __clk_rcg2_configure(struct clk_rcg2 *rcg, const struct freq_tbl *f)
> > cfg |= rcg->parent_map[index].cfg << CFG_SRC_SEL_SHIFT;
> > if (rcg->mnd_width && f->n && (f->m != f->n))
> > cfg |= CFG_MODE_DUAL_EDGE;
> > + if (rcg->flags & HW_CLK_CTRL_MODE)
> > + cfg |= CFG_HW_CLK_CTRL_MASK;
> > +
> > return regmap_update_bits(rcg->clkr.regmap, RCG_CFG_OFFSET(rcg),
> > mask, cfg);
> > }
>
> What about code for handling other flags? If it's not a part of the series,
>
> I don't think it makes sense to define them. Or perhaps you sent the
>
> wrong revision?

I opted to add all of the flags just to document them existing, but
only introducing the ones that will immediately be used is the better
way to go.

\
 
 \ /
  Last update: 2021-06-17 09:59    [W:0.096 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site