lkml.org 
[lkml]   [2021]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 04/15] media: i2c: max9286: Define high channel amplitude
Date
Provide a macro to define the reverse channel amplitude to
be used to compensate the remote serializer noise immunity.

While at it, update a comment.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/media/i2c/max9286.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index ed1cdefe7c30..9124d5fa6ea3 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -113,6 +113,7 @@
#define MAX9286_REV_TRF(n) ((n) << 4)
#define MAX9286_REV_AMP(n) ((((n) - 30) / 10) << 1) /* in mV */
#define MAX9286_REV_AMP_X BIT(0)
+#define MAX9286_REV_AMP_HIGH 170
/* Register 0x3f */
#define MAX9286_EN_REV_CFG BIT(6)
#define MAX9286_REV_FLEN(n) ((n) - 20)
@@ -567,12 +568,12 @@ static int max9286_notify_bound(struct v4l2_async_notifier *notifier,
* channels:
*
* - Increase the reverse channel amplitude to compensate for the
- * remote ends high threshold, if not done already
+ * remote ends high threshold
* - Verify all configuration links are properly detected
* - Disable auto-ack as communication on the control channel are now
* stable.
*/
- max9286_reverse_channel_setup(priv, 170);
+ max9286_reverse_channel_setup(priv, MAX9286_REV_AMP_HIGH);
max9286_check_config_link(priv, priv->source_mask);

/*
--
2.31.1
\
 
 \ /
  Last update: 2021-06-16 14:46    [W:0.151 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site