lkml.org 
[lkml]   [2021]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add DT bindings for RZ/G2L pinctrl
On Wed, Jun 16, 2021 at 02:26:39PM +0100, Lad Prabhakar wrote:
> Add device tree binding documentation and header file for Renesas
> RZ/G2L pinctrl.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
> ---
> .../pinctrl/renesas,rzg2l-pinctrl.yaml | 121 ++++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-rzg2l.h | 16 +++
> 2 files changed, 137 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-rzg2l.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> new file mode 100644
> index 000000000000..e8ab5a0a46b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas RZ/G2L combined Pin and GPIO controller
> +
> +maintainers:
> + - Geert Uytterhoeven <geert+renesas@glider.be>
> +
> +description:
> + The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO
> + controller.
> + Pin multiplexing and GPIO configuration is performed on a per-pin basis.
> + Each port features up to 8 pins, each of them configurable for GPIO function
> + (port mode) or in alternate function mode.
> + Up to 8 different alternate function modes exist for each single pin.
> +
> +properties:
> + compatible:
> + enum:
> + - renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
> +
> + reg:
> + maxItems: 1
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + const: 2
> + description:
> + The first cell contains the global GPIO port index, constructed using the
> + RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/pinctrl-rzg2l.h> and the
> + second cell represents consumer flag as mentioned in ../gpio/gpio.txt
> + E.g. "RZG2L_GPIO(39, 1)" for P39_1.
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + power-domains:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> +additionalProperties:
> + anyOf:
> + - type: object

Define a node name pattern for child nodes to match on rather than using
'additionalProperties'. '-pins$' for example.


> + allOf:
> + - $ref: pincfg-node.yaml#
> + - $ref: pinmux-node.yaml#
> +
> + description:
> + Pin controller client devices use pin configuration subnodes (children
> + and grandchildren) for desired pin configuration.
> + Client device subnodes use below standard properties.
> +
> + properties:
> + phandle: true
> + function: true
> + groups: true
> + pins: true
> + bias-disable: true
> + bias-pull-down: true
> + bias-pull-up: true
> + drive-strength:
> + enum: [ 2, 4, 8, 12 ]
> + power-source:
> + enum: [ 1800, 2500, 3300 ]
> + slew-rate: true
> + gpio-hog: true
> + gpios: true
> + input-enable: true
> + output-high: true
> + output-low: true
> + line-name: true
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - gpio-controller
> + - '#gpio-cells'
> + - gpio-ranges
> + - clocks
> + - power-domains
> + - resets
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/pinctrl-rzg2l.h>
> + #include <dt-bindings/clock/r9a07g044-cpg.h>
> +
> + pinctrl: pinctrl@11030000 {
> + compatible = "renesas,r9a07g044l-pinctrl";
> + reg = <0x11030000 0x10000>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pinctrl 0 0 392>;
> + clocks = <&cpg CPG_MOD R9A07G044_CLK_GPIO>;
> + resets = <&cpg R9A07G044_CLK_GPIO>;
> + power-domains = <&cpg>;
> +
> + scif0_pins: scif0 {
> + groups = "scif0_data";
> + function = "scif0";
> + };
> +
> + sd1-pwr-en-hog {
> + gpio-hog;
> + gpios = <RZG2L_GPIO(39, 2) 0>;
> + output-high;
> + line-name = "sd1_pwr_en";
> + };
> + };
> diff --git a/include/dt-bindings/pinctrl/pinctrl-rzg2l.h b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h
> new file mode 100644
> index 000000000000..d285d9e8c60a
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-rzg2l.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +/*
> + * This header provides constants for Renesas RZ/G2{L,LC} pinctrl bindings.
> + *
> + * Copyright (C) 2021 Renesas Electronics Corp.
> + *
> + */
> +
> +#ifndef __DT_BINDINGS_PINCTRL_RZG2L_H
> +#define __DT_BINDINGS_PINCTRL_RZG2L_H
> +
> +#define RZG2L_PINS_PER_PORT 8
> +
> +#define RZG2L_GPIO(port, pos) ((port) * RZG2L_PINS_PER_PORT + (pos))
> +
> +#endif /* __DT_BINDINGS_PINCTRL_RZG2L_H */
> --
> 2.17.1

\
 
 \ /
  Last update: 2021-06-16 18:11    [W:0.120 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site