Messages in this thread Patch in this message | | | From | Grygorii Strashko <> | Subject | [PATCH next 09/15] ARM: dts: am335x-osd3358-sm-red: switch to new cpsw switch drv | Date | Sat, 12 Jun 2021 04:14:30 +0300 |
| |
The dual_mac mode has been preserved the same way between legacy and new driver, and one port devices works the same as 1 dual_mac port - it's safe to switch drivers.
So, switch Octavo Systems OSD3358-SM-RED to use new cpsw switch driver. Those boards have or 2 Ext. port wired and configured in dual_mac mode by default, or only 1 Ext. port.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- arch/arm/boot/dts/am335x-osd3358-sm-red.dts | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts index 5403e47c07e2..605b2a436edf 100644 --- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts +++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts @@ -391,24 +391,27 @@ clock-frequency = <100000>; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; + ti,dual-emac-pvid = <1>; }; -&mac { - slaves = <1>; +&cpsw_port2 { + status = "disabled"; +}; + +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@4 { reg = <4>; -- 2.17.1
| |