lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH 1/4] serial: 8250: Dissociate 4MHz Titan ports from Oxford ports
Oxford Semiconductor PCIe (Tornado) serial port devices have their baud 
base set incorrectly, however their `pciserial_board' entries have been
reused for Titan serial port devices. Define own entries for the latter
devices then, carrying over the settings, so that Oxford entries can be
fixed.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
drivers/tty/serial/8250/8250_pci.c | 44 +++++++++++++++++++++++++++++++------
1 file changed, 38 insertions(+), 6 deletions(-)

linux-serial-8250-titan-driver-data.diff
Index: linux-malta-cbus-uart/drivers/tty/serial/8250/8250_pci.c
===================================================================
--- linux-malta-cbus-uart.orig/drivers/tty/serial/8250/8250_pci.c
+++ linux-malta-cbus-uart/drivers/tty/serial/8250/8250_pci.c
@@ -2972,6 +2972,10 @@ enum pci_board_num_t {
pbn_sunix_pci_4s,
pbn_sunix_pci_8s,
pbn_sunix_pci_16s,
+ pbn_titan_1_4000000,
+ pbn_titan_2_4000000,
+ pbn_titan_4_4000000,
+ pbn_titan_8_4000000,
pbn_moxa8250_2p,
pbn_moxa8250_4p,
pbn_moxa8250_8p,
@@ -3759,6 +3763,34 @@ static struct pciserial_board pci_boards
.base_baud = 921600,
.uart_offset = 0x8,
},
+ [pbn_titan_1_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_titan_2_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_titan_4_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_titan_8_4000000] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 4000000,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
[pbn_moxa8250_2p] = {
.flags = FL_BASE1,
.num_ports = 2,
@@ -4703,22 +4735,22 @@ static const struct pci_device_id serial
pbn_b0_4_921600 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_100E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_1_4000000 },
+ pbn_titan_1_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_titan_2_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_4_4000000 },
+ pbn_titan_4_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800E,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_8_4000000 },
+ pbn_titan_8_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_titan_2_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_oxsemi_2_4000000 },
+ pbn_titan_2_4000000 },
{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_2_921600 },
\
 
 \ /
  Last update: 2021-06-10 20:39    [W:2.968 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site