lkml.org 
[lkml]   [2021]   [Jun]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: ima - wait for tpm load
On 10/06/21, Mimi Zohar wrote:
> [Cc'ing Jarkko]
>
> On Thu, 2021-06-10 at 09:16 +0200, Jorge Ramirez-Ortiz, Foundries
> wrote:
> > I am enabling IMA on a ZynqMP based platform using an SPI based TPM
> > from Infineon.
> >
> > The SPI TPM driver is built-in but since the IMA is initalized from a
> > late_initcall, IMA never finds the TPM.
> >
> > Is there a recomended way to work around this issue?
> >
> > fio@uz3cg-dwg:~$ dmesg | grep tpm
> > [ 3.381181] tpm_tis_spi spi1.1: 2.0 TPM (device-id 0x1B, rev-id 22)
> > [ 3.423608] tpm tpm0: A TPM error (256) occurred attempting the self test
> > [ 3.430406] tpm tpm0: starting up the TPM manually
> >
> > fio@uz3cg-dwg:~$ dmesg | grep ima
> > [ 3.525741] ima: No TPM chip found, activating TPM-bypass!
> > [ 3.531233] ima: Allocated hash algorithm: sha1
>
> Lengthening the TPM timeout, executing the TPM self test have been past
> reasons for the TPM not to initialize prior to IMA.

right, I can understand this.

The problem in this case is that tpm_chip_register() is taking too
long so by the time it executes tpm_add_char_device(chip) is called,
ima has already given up.

The way I am working around this is just by adding a new flag and
providing the chip in idr_alloc (so ima can find it).

Then add an 'enable' flag to the chip structure that ima can use to
wait on.

@@ -333,8 +345,13 @@ struct tpm_chip *tpm_chip_alloc(struct device *pdev,

chip->ops = ops;

+ if (ops->flags & TPM_OPS_SLOW_STARTUP)
+ chip->flags |= TPM_CHIP_FLAG_SLOW_STARTUP;
+
mutex_lock(&idr_lock);
- rc = idr_alloc(&dev_nums_idr, NULL, 0, TPM_NUM_DEVICES, GFP_KERNEL);
+ rc = idr_alloc(&dev_nums_idr,
+ chip->flags & TPM_CHIP_FLAG_SLOW_STARTUP ? chip : NULL,
+ 0, TPM_NUM_DEVICES, GFP_KERNEL);
mutex_unlock(&idr_lock);
if (rc < 0) {
dev_err(pdev, "No available tpm device numbers\n");


>
> (Missing from this bug report is the kernel version.)

um, didnt think of it as a bug report - the feature is clearly not
synchronized so there can be no guarantees about available TPMs being
used.

but yes, this is happening on 5.10.42 using tpm_tis_spi to connect to
infineon SLM9670

>
> thanks,
>
> Mimi
>

\
 
 \ /
  Last update: 2021-06-10 17:21    [W:4.536 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site