Messages in this thread Patch in this message | | | From | Neil Armstrong <> | Subject | [PATCH 3/6] arm64: dts: meson-sm1-odroid-c4: fix hub_5v regulator gpio | Date | Tue, 1 Jun 2021 11:01:37 +0200 |
| |
As described in the Odroid-C4 schematics, the HUB_5V regulator is controlled by GPIOH_8 and in Open Drain since this GPIO doesn't support Push-Pull.
Fixes: 326e57518b0d ("arm64: dts: meson-sm1: add support for Hardkernel ODROID-C4") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts index 8c327c03d845..63695ea21b1c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts @@ -31,7 +31,7 @@ hub_5v: regulator-hub_5v { vin-supply = <&vcc_5v>; /* Connected to the Hub CHIPENABLE, LOW sets low power state */ - gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; enable-active-high; }; -- 2.25.1
| |