Messages in this thread | | | Date | Thu, 06 May 2021 22:58:48 +0530 | From | gubbaven@codeauro ... | Subject | Re: [PATCH v2 2/3] dt-bindings: net: bluetooth: Convert to DT schema |
| |
Hi Rob Herring, On 2021-04-21 22:40, Rob Herring wrote: > On Tue, Apr 20, 2021 at 09:56:49PM +0530, Venkata Lakshmi Narayana > Gubba wrote: >> Converted Qualcomm Bluetooth binidings to DT schema. >> >> Signed-off-by: Venkata Lakshmi Narayana Gubba >> <gubbaven@codeaurora.org> >> --- >> .../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 >> ----------------- >> .../bindings/net/qualcomm-bluetooth.yaml | 87 >> ++++++++++++++++++++++ >> 2 files changed, 87 insertions(+), 69 deletions(-) >> delete mode 100644 >> Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> create mode 100644 >> Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> deleted file mode 100644 >> index 709ca6d..0000000 >> --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt >> +++ /dev/null >> @@ -1,69 +0,0 @@ >> -Qualcomm Bluetooth Chips >> ---------------------- >> - >> -This documents the binding structure and common properties for serial >> -attached Qualcomm devices. >> - >> -Serial attached Qualcomm devices shall be a child node of the host >> UART >> -device the slave device is attached to. >> - >> -Required properties: >> - - compatible: should contain one of the following: >> - * "qcom,qca6174-bt" >> - * "qcom,qca9377-bt" >> - * "qcom,wcn3990-bt" >> - * "qcom,wcn3991-bt" >> - * "qcom,wcn3998-bt" >> - * "qcom,qca6390-bt" >> - >> -Optional properties for compatible string qcom,qca6174-bt: >> - >> - - enable-gpios: gpio specifier used to enable chip >> - - clocks: clock provided to the controller (SUSCLK_32KHZ) >> - - firmware-name: specify the name of nvm firmware to load >> - >> -Optional properties for compatible string qcom,qca9377-bt: >> - >> - - max-speed: see >> Documentation/devicetree/bindings/serial/serial.yaml >> - >> -Required properties for compatible string qcom,wcn399x-bt: >> - >> - - vddio-supply: VDD_IO supply regulator handle. >> - - vddxo-supply: VDD_XO supply regulator handle. >> - - vddrf-supply: VDD_RF supply regulator handle. >> - - vddch0-supply: VDD_CH0 supply regulator handle. >> - >> -Optional properties for compatible string qcom,wcn399x-bt: >> - >> - - max-speed: see >> Documentation/devicetree/bindings/serial/serial.yaml >> - - firmware-name: specify the name of nvm firmware to load >> - - clocks: clock provided to the controller >> - >> -Examples: >> - >> -serial@7570000 { >> - label = "BT-UART"; >> - status = "okay"; >> - >> - bluetooth { >> - compatible = "qcom,qca6174-bt"; >> - >> - enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; >> - clocks = <&divclk4>; >> - firmware-name = "nvm_00440302.bin"; >> - }; >> -}; >> - >> -serial@898000 { >> - bluetooth { >> - compatible = "qcom,wcn3990-bt"; >> - >> - vddio-supply = <&vreg_s4a_1p8>; >> - vddxo-supply = <&vreg_l7a_1p8>; >> - vddrf-supply = <&vreg_l17a_1p3>; >> - vddch0-supply = <&vreg_l25a_3p3>; >> - max-speed = <3200000>; >> - firmware-name = "crnv21.bin"; >> - clocks = <&rpmhcc RPMH_RF_CLK2>; >> - }; >> -}; >> diff --git >> a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml >> b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml >> new file mode 100644 >> index 0000000..55cd995 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml >> @@ -0,0 +1,87 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm Bluetooth Chips >> + >> +maintainers: >> + - Rob Herring <robh@kernel.org> >> + - Marcel Holtmann <marcel@holtmann.org> >> + >> +description: >> + This binding describes Qualcomm UART-attached bluetooth chips. >> + >> +properties: >> + compatible: >> + enum: >> + - qcom,qca6174-bt >> + - qcom,qca9377-bt >> + - qcom,wcn3990-bt >> + - qcom,wcn3991-bt >> + - qcom,wcn3998-bt >> + - qcom,qca6390-bt >> + >> + enable-gpios: >> + maxItems: 1 >> + description: gpio specifier used to enable chip >> + >> + clocks: >> + maxItems: 1 >> + description: clock provided to the controller (SUSCLK_32KHZ) >> + >> + vddio-supply: >> + description: VDD_IO supply regulator handle >> + >> + vddxo-supply: >> + description: VDD_XO supply regulator handle >> + >> + vddrf-supply: >> + description: VDD_RF supply regulator handle >> + >> + vddch0-supply: >> + description: VDD_CH0 supply regulator handle >> + >> + max-speed: >> + description: see >> Documentation/devicetree/bindings/serial/serial.yaml >> + >> + firmware-name: >> + description: specify the name of nvm firmware to load >> + >> + local-bd-address: >> + description: see >> Documentation/devicetree/bindings/net/bluetooth.txt >> + >> + >> +required: >> + - compatible >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/gpio/gpio.h> >> + uart { > > Also, 'serial' is the proper node name. > [Venkata]: Sure, I will update in next patchset. >> + label = "BT-UART"; >> + status = "okay"; >> + >> + bluetooth { >> + compatible = "qcom,qca6174-bt"; >> + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; >> + clocks = <&divclk4>; >> + firmware-name = "nvm_00440302.bin"; >> + }; >> + }; >> + - | >> + uart { >> + >> + bluetooth { >> + compatible = "qcom,wcn3990-bt"; >> + vddio-supply = <&vreg_s4a_1p8>; >> + vddxo-supply = <&vreg_l7a_1p8>; >> + vddrf-supply = <&vreg_l17a_1p3>; >> + vddch0-supply = <&vreg_l25a_3p3>; >> + max-speed = <3200000>; >> + firmware-name = "crnv21.bin"; >> + }; >> + }; >> -- >> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a >> member >> of Code Aurora Forum, hosted by The Linux Foundation >>
Regards, Venkata.
| |