lkml.org 
[lkml]   [2021]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH net-next v3 10/20] net: dsa: qca8k: add priority tweak to qca8337 switch
On Wed, May 05, 2021 at 12:29:04AM +0200, Ansuel Smith wrote:
> The port 5 of the ar8337 have some problem in flood condition. The
> original legacy driver had some specific buffer and priority settings
> for the different port suggested by the QCA switch team. Add this
> missing settings to improve switch stability under load condition.
> The packet priority tweak and the rx delay is specific to qca8337.
> Limit this changes to qca8337 as now we also support 8327 switch.
>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/net/dsa/qca8k.c | 54 +++++++++++++++++++++++++++++++++++++++--
> drivers/net/dsa/qca8k.h | 24 ++++++++++++++++++
> 2 files changed, 76 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index 17c6fd4afa7d..9e034c445085 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -783,7 +783,12 @@ static int
> qca8k_setup(struct dsa_switch *ds)
> {
> struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
> + const struct qca8k_match_data *data;
> int ret, i;
> + u32 mask;
> +
> + /* get the switches ID from the compatible */
> + data = of_device_get_match_data(priv->dev);

You have already done this once in probe. Either store data in qca8k_priv,
or add the id to qca8K_priv.

Andrew

\
 
 \ /
  Last update: 2021-05-05 02:53    [W:0.315 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site