lkml.org 
[lkml]   [2021]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/11] mmc: core: Drop open coding when preparing commands with busy signaling
Date
Similar code for validating the host->max_busy_timeout towards the current
command's busy timeout, exists in mmc_do_erase(), mmc_sleep() and
__mmc_switch(). Let's move the common code into a helper function.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/core/core.c | 20 ++----------------
drivers/mmc/core/mmc.c | 20 +++---------------
drivers/mmc/core/mmc_ops.c | 42 +++++++++++++++++++++-----------------
drivers/mmc/core/mmc_ops.h | 3 +++
4 files changed, 31 insertions(+), 54 deletions(-)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index f194940c5974..b00c84ea8441 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1582,7 +1582,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
{
struct mmc_command cmd = {};
unsigned int qty = 0, busy_timeout = 0;
- bool use_r1b_resp = false;
+ bool use_r1b_resp;
int err;

mmc_retune_hold(card->host);
@@ -1650,23 +1650,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
cmd.opcode = MMC_ERASE;
cmd.arg = arg;
busy_timeout = mmc_erase_timeout(card, arg, qty);
- /*
- * If the host controller supports busy signalling and the timeout for
- * the erase operation does not exceed the max_busy_timeout, we should
- * use R1B response. Or we need to prevent the host from doing hw busy
- * detection, which is done by converting to a R1 response instead.
- * Note, some hosts requires R1B, which also means they are on their own
- * when it comes to deal with the busy timeout.
- */
- if (!(card->host->caps & MMC_CAP_NEED_RSP_BUSY) &&
- card->host->max_busy_timeout &&
- busy_timeout > card->host->max_busy_timeout) {
- cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
- } else {
- cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
- cmd.busy_timeout = busy_timeout;
- use_r1b_resp = true;
- }
+ use_r1b_resp = mmc_prepare_busy_cmd(card->host, &cmd, busy_timeout);

err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 8674c3e0c02c..63a7bd0b239c 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1910,6 +1910,7 @@ static int mmc_sleep(struct mmc_host *host)
struct mmc_command cmd = {};
struct mmc_card *card = host->card;
unsigned int timeout_ms = DIV_ROUND_UP(card->ext_csd.sa_timeout, 10000);
+ bool use_r1b_resp;
int err;

/* Re-tuning can't be done once the card is deselected */
@@ -1922,22 +1923,7 @@ static int mmc_sleep(struct mmc_host *host)
cmd.opcode = MMC_SLEEP_AWAKE;
cmd.arg = card->rca << 16;
cmd.arg |= 1 << 15;
-
- /*
- * If the max_busy_timeout of the host is specified, validate it against
- * the sleep cmd timeout. A failure means we need to prevent the host
- * from doing hw busy detection, which is done by converting to a R1
- * response instead of a R1B. Note, some hosts requires R1B, which also
- * means they are on their own when it comes to deal with the busy
- * timeout.
- */
- if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
- (timeout_ms > host->max_busy_timeout)) {
- cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
- } else {
- cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
- cmd.busy_timeout = timeout_ms;
- }
+ use_r1b_resp = mmc_prepare_busy_cmd(host, &cmd, timeout_ms);

err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
@@ -1949,7 +1935,7 @@ static int mmc_sleep(struct mmc_host *host)
* SEND_STATUS command to poll the status because that command (and most
* others) is invalid while the card sleeps.
*/
- if (!cmd.busy_timeout || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
+ if (!use_r1b_resp || !(host->caps & MMC_CAP_WAIT_WHILE_BUSY))
mmc_delay(timeout_ms);

out_release:
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 5756781fef37..025a4134d5c7 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -521,6 +521,27 @@ int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
return __mmc_poll_for_busy(card, timeout_ms, true, false, busy_cmd);
}

+bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
+ unsigned int timeout_ms)
+{
+ /*
+ * If the max_busy_timeout of the host is specified, make sure it's
+ * enough to fit the used timeout_ms. In case it's not, let's instruct
+ * the host to avoid HW busy detection, by converting to a R1 response
+ * instead of a R1B. Note, some hosts requires R1B, which also means
+ * they are on their own when it comes to deal with the busy timeout.
+ */
+ if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
+ (timeout_ms > host->max_busy_timeout)) {
+ cmd->flags = MMC_CMD_AC | MMC_RSP_SPI_R1 | MMC_RSP_R1;
+ return false;
+ }
+
+ cmd->flags = MMC_CMD_AC | MMC_RSP_SPI_R1B | MMC_RSP_R1B;
+ cmd->busy_timeout = timeout_ms;
+ return true;
+}
+
/**
* __mmc_switch - modify EXT_CSD register
* @card: the MMC card associated with the data transfer
@@ -543,7 +564,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
struct mmc_host *host = card->host;
int err;
struct mmc_command cmd = {};
- bool use_r1b_resp = true;
+ bool use_r1b_resp;
unsigned char old_timing = host->ios.timing;

mmc_retune_hold(host);
@@ -554,29 +575,12 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
timeout_ms = card->ext_csd.generic_cmd6_time;
}

- /*
- * If the max_busy_timeout of the host is specified, make sure it's
- * enough to fit the used timeout_ms. In case it's not, let's instruct
- * the host to avoid HW busy detection, by converting to a R1 response
- * instead of a R1B. Note, some hosts requires R1B, which also means
- * they are on their own when it comes to deal with the busy timeout.
- */
- if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout &&
- (timeout_ms > host->max_busy_timeout))
- use_r1b_resp = false;
-
cmd.opcode = MMC_SWITCH;
cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
(index << 16) |
(value << 8) |
set;
- cmd.flags = MMC_CMD_AC;
- if (use_r1b_resp) {
- cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
- cmd.busy_timeout = timeout_ms;
- } else {
- cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
- }
+ use_r1b_resp = mmc_prepare_busy_cmd(host, &cmd, timeout_ms);

err = mmc_wait_for_cmd(host, &cmd, retries);
if (err)
diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h
index 7bc1cfb0654c..ba898c435658 100644
--- a/drivers/mmc/core/mmc_ops.h
+++ b/drivers/mmc/core/mmc_ops.h
@@ -18,6 +18,7 @@ enum mmc_busy_cmd {

struct mmc_host;
struct mmc_card;
+struct mmc_command;

int mmc_select_card(struct mmc_card *card);
int mmc_deselect_cards(struct mmc_host *host);
@@ -35,6 +36,8 @@ int mmc_bus_test(struct mmc_card *card, u8 bus_width);
int mmc_can_ext_csd(struct mmc_card *card);
int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
int mmc_switch_status(struct mmc_card *card, bool crc_err_fatal);
+bool mmc_prepare_busy_cmd(struct mmc_host *host, struct mmc_command *cmd,
+ unsigned int timeout_ms);
int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
enum mmc_busy_cmd busy_cmd);
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
--
2.25.1
\
 
 \ /
  Last update: 2021-05-04 18:13    [W:2.215 / U:0.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site