lkml.org 
[lkml]   [2021]   [May]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Null pointer dereference in mcp251x driver when resuming from sleep
On Tue, May 04, 2021 at 03:54:00PM +0200, Frieder Schrempf wrote:
> On 03.05.21 15:54, Andy Shevchenko wrote:
> > On Mon, May 03, 2021 at 04:48:10PM +0300, Andy Shevchenko wrote:
> > > On Mon, May 03, 2021 at 04:44:24PM +0300, Andy Shevchenko wrote:
> > > > On Mon, May 03, 2021 at 03:11:40PM +0200, Frieder Schrempf wrote:
> > > > > Hi,
> > > > >
> > > > > with kernel 5.10.x and 5.12.x I'm getting a null pointer dereference
> > > > > exception from the mcp251x driver when I resume from sleep (see trace
> > > > > below).
> > > > >
> > > > > As far as I can tell this was working fine with 5.4. As I currently don't
> > > > > have the time to do further debugging/bisecting, for now I want to at least
> > > > > report this here.
> > > > >
> > > > > Maybe there is someone around who could already give a wild guess for what
> > > > > might cause this just by looking at the trace/code!?
> > > >
> > > > Does revert of c7299fea6769 ("spi: Fix spi device unregister flow") help?
> > >
> > > Other than that, bisecting will take not more than 3-4 iterations only:
> > > % git log --oneline v5.4..v5.10.34 -- drivers/net/can/spi/mcp251x.c
> > > 3292c4fc9ce2 can: mcp251x: fix support for half duplex SPI host controllers
> > > e0e25001d088 can: mcp251x: add support for half duplex controllers
> > > 74fa565b63dc can: mcp251x: Use readx_poll_timeout() helper
> > > 2d52dabbef60 can: mcp251x: add GPIO support
> > > cfc24a0aa7a1 can: mcp251x: sort include files alphabetically
> > > df561f6688fe treewide: Use fallthrough pseudo-keyword
> >
> > > 8ce8c0abcba3 can: mcp251x: only reset hardware as required
> >
> > And only smoking gun by analyzing the code is the above. So, for the first I
> > would simply check before that commit and immediately after (15-30 minutes of
> > work). (I would do it myself if I had a hardware at hand...)
>
> Thanks for pointing that out. Indeed when I revert this commit it works fine
> again.
>
> When I look at the change I see that queue_work(priv->wq,
> &priv->restart_work) is called in two cases, when the interface is brought
> up after resume and now also when the device is only powered up after resume
> but the interface stays down.
>
> The latter is a problem if the device was never brought up before, as the
> workqueue is only allocated and initialized in mcp251x_open().
>
> To me it looks like a proper fix would be to just move the workqueue init to
> the probe function to make sure it is available when resuming even if the
> interface was never up before.
>
> I will try this and send a patch if it looks good.

Sounds like a plan!

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2021-05-04 16:21    [W:0.425 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site