lkml.org 
[lkml]   [2021]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.11 038/115] backlight: qcom-wled: Use sink_addr for sync toggle
Date
From: Obeida Shamoun <oshmoun100@googlemail.com>

[ Upstream commit cdfd4c689e2a52c313b35ddfc1852ff274f91acb ]

WLED3_SINK_REG_SYNC is, as the name implies, a sink register offset.
Therefore, use the sink address as base instead of the ctrl address.

This fixes the sync toggle on wled4, which can be observed by the fact
that adjusting brightness now works.

It has no effect on wled3 because sink and ctrl base addresses are the
same. This allows adjusting the brightness without having to disable
then reenable the module.

Signed-off-by: Obeida Shamoun <oshmoun100@googlemail.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Kiran Gunda <kgunda@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/video/backlight/qcom-wled.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3bc7800eb0a9..83a187fdaa1d 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -336,13 +336,13 @@ static int wled3_sync_toggle(struct wled *wled)
unsigned int mask = GENMASK(wled->max_string_count - 1, 0);

rc = regmap_update_bits(wled->regmap,
- wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+ wled->sink_addr + WLED3_SINK_REG_SYNC,
mask, mask);
if (rc < 0)
return rc;

rc = regmap_update_bits(wled->regmap,
- wled->ctrl_addr + WLED3_SINK_REG_SYNC,
+ wled->sink_addr + WLED3_SINK_REG_SYNC,
mask, WLED3_SINK_REG_SYNC_CLEAR);

return rc;
--
2.30.2
\
 
 \ /
  Last update: 2021-05-03 18:45    [W:0.275 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site