lkml.org 
[lkml]   [2021]   [May]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [GIT PULL] KVM, AMD PSP and ARM CoreSight changes for 5.13 merge window
On Sat, May 01, 2021 at 10:00:26AM +0200, Paolo Bonzini wrote:
> On 29/04/21 01:05, Paolo Bonzini wrote:
> > Linus,
> >
> > The following changes since commit 523caed9efbb049339706b124185c9358c1b6477:
> >
> > x86/sgx: Mark sgx_vepc_vm_ops static (2021-04-12 19:48:32 +0200)
> >
> > are available in the Git repository at:
> >
> > https://git.kernel.org/pub/scm/virt/kvm/kvm.git tags/for-linus
> >
> > for you to fetch changes up to 3bf0fcd754345d7ea63e1446015ba65ece6788ca:
> >
> > KVM: selftests: Speed up set_memory_region_test (2021-04-26 12:21:27 -0400)
>
> Hi Linus,
>
> is there anything wrong with this pull request? (I saw that in the
> meanwhile you did the MIPS pull, so the conflict on
> arch/mips/kvm/trap_emul.c will happen when you pull from me).
>
> Mathieu, can you confirm that your coresight branch will *not* be sent by
> the ARM maintainers as well?

Confirmed. Marc's tree is the only place where the ETE-TRBE functionality has
been added. It was specifically done that way to avoid having the same code in
multiple branches and prevent merge conflicts.

Let me know if you need more information.

Thanks,
Mathieu

> (Typically they are sent to both upstream
> maintainers, in this case that would be ARM and KVM/ARM->KVM; this is also
> why I waited until Thursday to send my pull request, as I would have
> preferred if all the topic branches had been merged already).
>
> Thanks,
>
> Paolo
>
> >
> > It's a fairly large pull request for KVM standards. There were quite
> > a few common topic branches and crossover series with other trees,
> > especially within KVM ARM, which I need to mention explicitly.
> > In particular:
> >
> > - the coresight/next-ETE-TRBE branch from the KVM ARM tree hasn't yet
> > reached you, so I am CCing the maintainer. Since he sent the patches
> > as a pull request to Marc Zyngier (the KVM ARM maintainer) at
> > https://lore.kernel.org/kvmarm/20210406224437.330939-1-mathieu.poirier@linaro.org/T/#u,
> > I actually suspect that from his point of view he's done.
> >
> > - Herbert Xu and Tom Lendacky asked to include AMD PSP driver changes
> > in this pull request
> >
> > - the KVM ARM tree also brought in a handful of "Get rid of oprofile
> > leftovers" patches for other architectures, but they all have maintainer
> > acks and are just cleanups, so I am a bit less worried there.
> >
> > I hope all this is okay.
> >
> >
> > Despite the juggling of topic branches, a couple conflicts escaped:
> >
> > - the worst is with the tip rework of x86 TLB flushes. Basically, tip
> > renamed kvm_flush_tlb_others to kvm_flush_tlb_multi, added a comment and
> > moved it to a different position. KVM moved it somewhere else, so after
> > merging you'll have both kvm_flush_tlb_multi and kvm_flush_tlb_others.
> > You need to take kvm_flush_tlb_multi and paste it in place of
> > kvm_flush_tlb_others. For everything else the KVM code is the correct
> > one, again except for s/kvm_flush_tlb_others/kvm_flush_tlb_multi/.
> > I have placed the relevant hunks of the "diff --combined" output at the
> > end of this message.
> >
> > - arch/mips/kvm/trap_emul.c has been deleted in the MIPS tree, which
> > will cause a modify/delete conflict either now or when merging the
> > MIPS tree. The conflict is of course solved just by deleting the file.
> > For the future, Thomas Bogendorfer will either not take KVM patches or
> > ensure that we have a common topic branch.
> >
> >
> > Thanks,
> >
> > Paolo
> >
> > ----------------------------------------------------------------
> > ARM:
> >
> > - Stage-2 isolation for the host kernel when running in protected mode
> >
> > - Guest SVE support when running in nVHE mode
> >
> > - Force W^X hypervisor mappings in nVHE mode
> >
> > - ITS save/restore for guests using direct injection with GICv4.1
> >
> > - nVHE panics now produce readable backtraces
> >
> > - Guest support for PTP using the ptp_kvm driver
> >
> > - Performance improvements in the S2 fault handler
> >
> > x86:
> >
> > - Optimizations and cleanup of nested SVM code
> >
> > - AMD: Support for virtual SPEC_CTRL
> >
> > - Optimizations of the new MMU code: fast invalidation,
> > zap under read lock, enable/disably dirty page logging under
> > read lock
> >
> > - /dev/kvm API for AMD SEV live migration (guest API coming soon)
> >
> > - support SEV virtual machines sharing the same encryption context
> >
> > - support SGX in virtual machines
> >
> > - add a few more statistics
> >
> > - improved directed yield heuristics
> >
> > - Lots and lots of cleanups
> >
> > Generic:
> >
> > - Rework of MMU notifier interface, simplifying and optimizing
> > the architecture-specific code
> >
> > - Some selftests improvements
> >
> > ----------------------------------------------------------------
> > Alexandru Elisei (4):
> > Documentation: KVM: Document KVM_GUESTDBG_USE_HW control flag for arm64
> > KVM: arm64: Initialize VCPU mdcr_el2 before loading it
> > KVM: arm64: Don't print warning when trapping SPE registers
> > KVM: arm64: Don't advertise FEAT_SPE to guests
> >
> > Andrew Scull (5):
> > bug: Remove redundant condition check in report_bug
> > bug: Factor out a getter for a bug's file line
> > bug: Assign values once in bug_get_file_line()
> > KVM: arm64: Use BUG and BUG_ON in nVHE hyp
> > KVM: arm64: Log source when panicking from nVHE hyp
> >
> > Anshuman Khandual (5):
> > arm64: Add TRBE definitions
> > coresight: core: Add support for dedicated percpu sinks
> > coresight: sink: Add TRBE driver
> > Documentation: coresight: trbe: Sysfs ABI description
> > Documentation: trace: Add documentation for TRBE
> >
> > Babu Moger (2):
> > x86/cpufeatures: Add the Virtual SPEC_CTRL feature
> > KVM: SVM: Add support for Virtual SPEC_CTRL
> >
> > Ben Gardon (13):
> > KVM: x86/mmu: Re-add const qualifier in kvm_tdp_mmu_zap_collapsible_sptes
> > KVM: x86/mmu: Move kvm_mmu_(get|put)_root to TDP MMU
> > KVM: x86/mmu: use tdp_mmu_free_sp to free roots
> > KVM: x86/mmu: Merge TDP MMU put and free root
> > KVM: x86/mmu: Refactor yield safe root iterator
> > KVM: x86/mmu: Make TDP MMU root refcount atomic
> > KVM: x86/mmu: handle cmpxchg failure in kvm_tdp_mmu_get_root
> > KVM: x86/mmu: Protect the tdp_mmu_roots list with RCU
> > KVM: x86/mmu: Allow zap gfn range to operate under the mmu read lock
> > KVM: x86/mmu: Allow zapping collapsible SPTEs to use MMU read lock
> > KVM: x86/mmu: Allow enabling/disabling dirty logging under MMU read lock
> > KVM: x86/mmu: Fast invalidation for TDP MMU
> > KVM: x86/mmu: Tear down roots before kvm_mmu_zap_all_fast returns
> >
> > Bhaskar Chowdhury (1):
> > KVM: s390: Fix comment spelling in kvm_s390_vcpu_start()
> >
> > Brijesh Singh (6):
> > KVM: SVM: Add KVM_SEV SEND_START command
> > KVM: SVM: Add KVM_SEND_UPDATE_DATA command
> > KVM: SVM: Add KVM_SEV_SEND_FINISH command
> > KVM: SVM: Add support for KVM_SEV_RECEIVE_START command
> > KVM: SVM: Add KVM_SEV_RECEIVE_UPDATE_DATA command
> > KVM: SVM: Add KVM_SEV_RECEIVE_FINISH command
> >
> > Cathy Avery (4):
> > KVM: SVM: Use a separate vmcb for the nested L2 guest
> > KVM: nSVM: Track the physical cpu of the vmcb vmrun through the vmcb
> > KVM: nSVM: Track the ASID generation of the vmcb vmrun through the vmcb
> > KVM: nSVM: Optimize vmcb12 to vmcb02 save area copies
> >
> > Claudio Imbrenda (5):
> > KVM: s390: split kvm_s390_logical_to_effective
> > KVM: s390: extend kvm_s390_shadow_fault to return entry pointer
> > KVM: s390: VSIE: correctly handle MVPG when in VSIE
> > KVM: s390: split kvm_s390_real_to_abs
> > KVM: s390: VSIE: fix MVPG handling for prefixing and MSO
> >
> > Daniel Kiss (1):
> > KVM: arm64: Enable SVE support for nVHE
> >
> > David Brazdil (1):
> > KVM: arm64: Support PREL/PLT relocs in EL2 code
> >
> > David Edmondson (5):
> > KVM: x86: dump_vmcs should not assume GUEST_IA32_EFER is valid
> > KVM: x86: dump_vmcs should not conflate EFER and PAT presence in VMCS
> > KVM: x86: dump_vmcs should consider only the load controls of EFER/PAT
> > KVM: x86: dump_vmcs should show the effective EFER
> > KVM: x86: dump_vmcs should include the autoload/autostore MSR lists
> >
> > Dongli Zhang (1):
> > KVM: x86: to track if L1 is running L2 VM
> >
> > Emanuele Giuseppe Esposito (1):
> > doc/virt/kvm: move KVM_CAP_PPC_MULTITCE in section 8
> >
> > Eric Auger (11):
> > KVM: arm64: vgic-v3: Fix some error codes when setting RDIST base
> > KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read
> > KVM: arm64: vgic-v3: Fix error handling in vgic_v3_set_redist_base()
> > KVM: arm/arm64: vgic: Reset base address on kvm_vgic_dist_destroy()
> > docs: kvm: devices/arm-vgic-v3: enhance KVM_DEV_ARM_VGIC_CTRL_INIT doc
> > KVM: arm64: Simplify argument passing to vgic_uaccess_[read|write]
> > kvm: arm64: vgic-v3: Introduce vgic_v3_free_redist_region()
> > KVM: arm64: vgic-v3: Expose GICR_TYPER.Last for userspace
> > KVM: selftests: aarch64/vgic-v3 init sequence tests
> > KVM: selftests: vgic_init kvm selftests fixup
> > KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read
> >
> > Gavin Shan (3):
> > KVM: arm64: Hide kvm_mmu_wp_memory_region()
> > KVM: arm64: Use find_vma_intersection()
> > KVM: arm64: Don't retrieve memory slot again in page fault handler
> >
> > Haiwei Li (2):
> > KVM: vmx: add mismatched size assertions in vmcs_check32()
> > KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
> >
> > Heiko Carstens (1):
> > KVM: s390: fix guarded storage control register handling
> >
> > Isaku Yamahata (1):
> > KVM: VMX: use EPT_VIOLATION_GVA_TRANSLATED instead of 0x100
> >
> > Jianyong Wu (4):
> > ptp: Reorganize ptp_kvm.c to make it arch-independent
> > clocksource: Add clocksource id for arm arch counter
> > KVM: arm64: Add support for the KVM PTP service
> > ptp: arm/arm64: Enable ptp_kvm for arm/arm64
> >
> > Jon Hunter (1):
> > ptp: Don't print an error if ptp_kvm is not supported
> >
> > Keqian Zhu (1):
> > KVM: x86: Remove unused function declaration
> >
> > Krish Sadhukhan (4):
> > KVM: nSVM: Add missing checks for reserved bits to svm_set_nested_state()
> > KVM: nSVM: If VMRUN is single-stepped, queue the #DB intercept in nested_svm_vmexit()
> > KVM: SVM: Define actual size of IOPM and MSRPM tables
> > nSVM: Check addresses of MSR and IO permission maps
> >
> > Marc Zyngier (47):
> > KVM: arm64: Provide KVM's own save/restore SVE primitives
> > KVM: arm64: Use {read,write}_sysreg_el1 to access ZCR_EL1
> > KVM: arm64: Let vcpu_sve_pffr() handle HYP VAs
> > KVM: arm64: Introduce vcpu_sve_vq() helper
> > arm64: sve: Provide a conditional update accessor for ZCR_ELx
> > KVM: arm64: Rework SVE host-save/guest-restore
> > KVM: arm64: Map SVE context at EL2 when available
> > KVM: arm64: Save guest's ZCR_EL1 before saving the FPSIMD state
> > KVM: arm64: Trap host SVE accesses when the FPSIMD state is dirty
> > KVM: arm64: Save/restore SVE state for nVHE
> > arm64: Use INIT_SCTLR_EL1_MMU_OFF to disable the MMU on CPU restart
> > KVM: arm64: Use INIT_SCTLR_EL2_MMU_OFF to disable the MMU on KVM teardown
> > KVM: arm64: Turn SCTLR_ELx_FLAGS into INIT_SCTLR_EL2_MMU_ON
> > KVM: arm64: Force SCTLR_EL2.WXN when running nVHE
> > KVM: arm64: Fix host's ZCR_EL2 restore on nVHE
> > Merge tag 'v5.12-rc3' into kvm-arm64/host-stage2
> > irqchip/gic-v3-its: Add a cache invalidation right after vPE unmapping
> > KVM: arm64: Generate final CTR_EL0 value when running in Protected mode
> > KVM: arm64: Drop the CPU_FTR_REG_HYP_COPY infrastructure
> > KVM: arm64: Elect Alexandru as a replacement for Julien as a reviewer
> > KVM: arm64: Mark the kvmarm ML as moderated for non-subscribers
> > KVM: arm64: Fix table format for PTP documentation
> > Merge remote-tracking branch 'coresight/next-ETE-TRBE' into kvmarm-master/next
> > KVM: arm64: Clarify vcpu reset behaviour
> > KVM: arm64: Fully zero the vcpu state on reset
> > Merge branch 'kvm-arm64/debug-5.13' into kvmarm-master/next
> > Merge branch 'kvm-arm64/host-stage2' into kvmarm-master/next
> > Merge branch 'kvm-arm64/memslot-fixes' into kvmarm-master/next
> > Merge branch 'kvm-arm64/misc-5.13' into kvmarm-master/next
> > Merge branch 'kvm-arm64/nvhe-panic-info' into kvmarm-master/next
> > Merge branch 'kvm-arm64/nvhe-sve' into kvmarm-master/next
> > Merge branch 'kvm-arm64/nvhe-wxn' into kvmarm-master/next
> > Merge branch 'kvm-arm64/ptp' into kvmarm-master/next
> > Merge branch 'kvm-arm64/vgic-5.13' into kvmarm-master/next
> > Merge branch 'kvm-arm64/vlpi-save-restore' into kvmarm-master/next
> > Merge remote-tracking branch 'arm64/for-next/vhe-only' into kvmarm-master/next
> > Merge remote-tracking branch 'arm64/for-next/neon-softirqs-disabled' into kvmarm-master/next
> > Merge remote-tracking branch 'coresight/next-ETE-TRBE' into kvmarm-master/next
> > bug: Provide dummy version of bug_get_file_line() when !GENERIC_BUG
> > Merge branch 'kvm-arm64/nvhe-panic-info' into kvmarm-master/next
> > Merge branch 'kvm-arm64/ptp' into kvmarm-master/next
> > KVM: arm64: Divorce the perf code from oprofile helpers
> > arm64: Get rid of oprofile leftovers
> > s390: Get rid of oprofile leftovers
> > sh: Get rid of oprofile leftovers
> > perf: Get rid of oprofile leftovers
> > Merge branch 'kvm-arm64/kill_oprofile_dependency' into kvmarm-master/next
> >
> > Maxim Levitsky (10):
> > KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state
> > KVM: x86: determine if an exception has an error code only when injecting it.
> > KVM: x86: mmu: initialize fault.async_page_fault in walk_addr_generic
> > KVM: x86: add guest_cpuid_is_intel
> > KVM: nSVM: improve SYSENTER emulation on AMD
> > KVM: nSVM: call nested_svm_load_cr3 on nested state load
> > KVM: x86: pending exceptions must not be blocked by an injected event
> > KVM: x86: implement KVM_CAP_SET_GUEST_DEBUG2
> > KVM: aarch64: implement KVM_CAP_SET_GUEST_DEBUG2
> > KVM: s390x: implement KVM_CAP_SET_GUEST_DEBUG2
> >
> > Nathan Tempelman (1):
> > KVM: x86: Support KVM VMs sharing SEV context
> >
> > Paolo Bonzini (27):
> > KVM: nSVM: rename functions and variables according to vmcbXY nomenclature
> > KVM: nSVM: do not copy vmcb01->control blindly to vmcb02->control
> > KVM: nSVM: do not mark all VMCB01 fields dirty on nested vmexit
> > KVM: nSVM: do not mark all VMCB02 fields dirty on nested vmexit
> > KVM: nSVM: only copy L1 non-VMLOAD/VMSAVE data in svm_set_nested_state()
> > KVM: SVM: merge update_cr0_intercept into svm_set_cr0
> > KVM: SVM: Pass struct kvm_vcpu to exit handlers (and many, many other places)
> > KVM: SVM: move VMLOAD/VMSAVE to C code
> > Merge branch 'kvm-fix-svm-races' into HEAD
> > Merge branch 'kvm-tdp-fix-flushes' into HEAD
> > Merge branch 'kvm-tdp-fix-rcu' into HEAD
> > Merge tag 'kvm-s390-next-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
> > Merge tag 'kvm-s390-next-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
> > Merge remote-tracking branch 'tip/x86/sgx' into kvm-next
> > KVM: MMU: load PDPTRs outside mmu_lock
> > KVM: introduce KVM_CAP_SET_GUEST_DEBUG2
> > KVM: MMU: protect TDP MMU pages only down to required level
> > KVM: constify kvm_arch_flush_remote_tlbs_memslot
> > KVM: MIPS: rework flush_shadow_* callbacks into one that prepares the flush
> > KVM: MIPS: let generic code call prepare_flush_shadow
> > KVM: MIPS: defer flush to generic MMU notifier code
> > KVM: selftests: Always run vCPU thread with blocked SIG_IPI
> > KVM: x86: document behavior of measurement ioctls with len==0
> > Merge branch 'kvm-sev-cgroup' into HEAD
> > Merge tag 'kvmarm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
> > KVM: documentation: fix sphinx warnings
> > KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
> >
> > Peter Xu (1):
> > KVM: selftests: Sync data verify of dirty logging with guest sync
> >
> > Pierre Morel (1):
> > KVM: s390: diag9c (directed yield) forwarding
> >
> > Quentin Perret (35):
> > KVM: arm64: Initialize kvm_nvhe_init_params early
> > KVM: arm64: Avoid free_page() in page-table allocator
> > KVM: arm64: Factor memory allocation out of pgtable.c
> > KVM: arm64: Introduce a BSS section for use at Hyp
> > KVM: arm64: Make kvm_call_hyp() a function call at Hyp
> > KVM: arm64: Allow using kvm_nvhe_sym() in hyp code
> > KVM: arm64: Introduce an early Hyp page allocator
> > KVM: arm64: Stub CONFIG_DEBUG_LIST at Hyp
> > KVM: arm64: Introduce a Hyp buddy page allocator
> > KVM: arm64: Enable access to sanitized CPU features at EL2
> > KVM: arm64: Provide __flush_dcache_area at EL2
> > KVM: arm64: Factor out vector address calculation
> > arm64: asm: Provide set_sctlr_el2 macro
> > KVM: arm64: Prepare the creation of s1 mappings at EL2
> > KVM: arm64: Elevate hypervisor mappings creation at EL2
> > KVM: arm64: Use kvm_arch for stage 2 pgtable
> > KVM: arm64: Use kvm_arch in kvm_s2_mmu
> > KVM: arm64: Set host stage 2 using kvm_nvhe_init_params
> > KVM: arm64: Refactor kvm_arm_setup_stage2()
> > KVM: arm64: Refactor __load_guest_stage2()
> > KVM: arm64: Refactor __populate_fault_info()
> > KVM: arm64: Make memcache anonymous in pgtable allocator
> > KVM: arm64: Reserve memory for host stage 2
> > KVM: arm64: Sort the hypervisor memblocks
> > KVM: arm64: Always zero invalid PTEs
> > KVM: arm64: Use page-table to track page ownership
> > KVM: arm64: Refactor the *_map_set_prot_attr() helpers
> > KVM: arm64: Add kvm_pgtable_stage2_find_range()
> > KVM: arm64: Introduce KVM_PGTABLE_S2_NOFWB stage 2 flag
> > KVM: arm64: Introduce KVM_PGTABLE_S2_IDMAP stage 2 flag
> > KVM: arm64: Provide sanitized mmfr* registers at EL2
> > KVM: arm64: Wrap the host with a stage 2
> > KVM: arm64: Page-align the .hyp sections
> > KVM: arm64: Disable PMU support in protected mode
> > KVM: arm64: Protect the .hyp sections from the host
> >
> > Ricardo Koller (1):
> > KVM: x86: Move reverse CPUID helpers to separate header file
> >
> > Sean Christopherson (147):
> > KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit
> > KVM: x86/mmu: Capture 'mmu' in a local variable when allocating roots
> > KVM: x86/mmu: Allocate the lm_root before allocating PAE roots
> > KVM: x86/mmu: Allocate pae_root and lm_root pages in dedicated helper
> > KVM: x86/mmu: Ensure MMU pages are available when allocating roots
> > KVM: x86/mmu: Check PDPTRs before allocating PAE roots
> > KVM: x86/mmu: Fix and unconditionally enable WARNs to detect PAE leaks
> > KVM: x86/mmu: Set the C-bit in the PDPTRs and LM pseudo-PDPTRs
> > KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch
> > KVM: x86: Defer the MMU unload to the normal path on an global INVPCID
> > KVM: x86/mmu: Unexport MMU load/unload functions
> > KVM: x86/mmu: Sync roots after MMU load iff load as successful
> > KVM: x86/mmu: WARN on NULL pae_root or lm_root, or bad shadow root level
> > KVM: SVM: Don't strip the C-bit from CR2 on #PF interception
> > KVM: nSVM: Set the shadow root level to the TDP level for nested NPT
> > KVM: x86: Move nVMX's consistency check macro to common code
> > KVM: nSVM: Trace VM-Enter consistency check failures
> > KVM: x86: Handle triple fault in L2 without killing L1
> > KVM: nSVM: Add helper to synthesize nested VM-Exit without collateral
> > KVM: nSVM: Add VMLOAD/VMSAVE helper to deduplicate code
> > KVM: x86: Move XSETBV emulation to common code
> > KVM: x86: Move trivial instruction-based exit handlers to common code
> > KVM: x86: Move RDPMC emulation to common code
> > KVM: SVM: Don't manually emulate RDPMC if nrips=0
> > KVM: SVM: Skip intercepted PAUSE instructions after emulation
> > KVM: x86/mmu: Remove spurious TLB flush from TDP MMU's change_pte() hook
> > KVM: x86/mmu: WARN if TDP MMU's set_tdp_spte() sees multiple GFNs
> > KVM: x86/mmu: Use 'end' param in TDP MMU's test_age_gfn()
> > KVM: x86/mmu: Add typedefs for rmap/iter handlers
> > KVM: x86/mmu: Add convenience wrapper for acting on single hva in TDP MMU
> > KVM: x86/mmu: Check for shadow-present SPTE before querying A/D status
> > KVM: x86/mmu: Bail from fast_page_fault() if SPTE is not shadow-present
> > KVM: x86/mmu: Disable MMIO caching if MMIO value collides with L1TF
> > KVM: x86/mmu: Retry page faults that hit an invalid memslot
> > KVM: x86/mmu: Don't install bogus MMIO SPTEs if MMIO caching is disabled
> > KVM: x86/mmu: Handle MMIO SPTEs directly in mmu_set_spte()
> > KVM: x86/mmu: Drop redundant trace_kvm_mmu_set_spte() in the TDP MMU
> > KVM: x86/mmu: Rename 'mask' to 'spte' in MMIO SPTE helpers
> > KVM: x86/mmu: Stop using software available bits to denote MMIO SPTEs
> > KVM: x86/mmu: Add module param to disable MMIO caching (for testing)
> > KVM: x86/mmu: Rename and document A/D scheme for TDP SPTEs
> > KVM: x86/mmu: Use MMIO SPTE bits 53 and 52 for the MMIO generation
> > KVM: x86/mmu: Document dependency bewteen TDP A/D type and saved bits
> > KVM: x86/mmu: Move initial kvm_mmu_set_mask_ptes() call into MMU proper
> > KVM: x86/mmu: Co-locate code for setting various SPTE masks
> > KVM: x86/mmu: Move logic for setting SPTE masks for EPT into the MMU proper
> > KVM: x86/mmu: Make Host-writable and MMU-writable bit locations dynamic
> > KVM: x86/mmu: Use high bits for host/mmu writable masks for EPT SPTEs
> > KVM: x86/mmu: Use a dedicated bit to track shadow/MMU-present SPTEs
> > KVM: x86/mmu: Tweak auditing WARN for A/D bits to !PRESENT (was MMIO)
> > KVM: x86/mmu: Use is_removed_spte() instead of open coded equivalents
> > KVM: x86/mmu: Use low available bits for removed SPTEs
> > KVM: x86/mmu: Dump reserved bits if they're detected on non-MMIO SPTE
> > KVM: x86: Get active PCID only when writing a CR3 value
> > KVM: VMX: Track common EPTP for Hyper-V's paravirt TLB flush
> > KVM: VMX: Stash kvm_vmx in a local variable for Hyper-V paravirt TLB flush
> > KVM: VMX: Fold Hyper-V EPTP checking into it's only caller
> > KVM: VMX: Do Hyper-V TLB flush iff vCPU's EPTP hasn't been flushed
> > KVM: VMX: Invalidate hv_tlb_eptp to denote an EPTP mismatch
> > KVM: VMX: Don't invalidate hv_tlb_eptp if the new EPTP matches
> > KVM: VMX: Explicitly check for hv_remote_flush_tlb when loading pgd
> > KVM: VMX: Define Hyper-V paravirt TLB flush fields iff Hyper-V is enabled
> > KVM: VMX: Skip additional Hyper-V TLB EPTP flushes if one fails
> > KVM: VMX: Track root HPA instead of EPTP for paravirt Hyper-V TLB flush
> > KVM: x86/mmu: Use '0' as the one and only value for an invalid PAE root
> > KVM: x86/mmu: Mark the PAE roots as decrypted for shadow paging
> > KVM: x86/mmu: Coalesce TDP MMU TLB flushes when zapping collapsible SPTEs
> > KVM: x86/mmu: Move flushing for "slot" handlers to caller for legacy MMU
> > KVM: x86/mmu: Coalesce TLB flushes when zapping collapsible SPTEs
> > KVM: x86/mmu: Coalesce TLB flushes across address spaces for gfn range zap
> > KVM: x86/mmu: Pass address space ID to __kvm_tdp_mmu_zap_gfn_range()
> > KVM: x86/mmu: Pass address space ID to TDP MMU root walkers
> > KVM: x86/mmu: Use leaf-only loop for walking TDP SPTEs when changing SPTE
> > KVM: Move prototypes for MMU notifier callbacks to generic code
> > KVM: Move arm64's MMU notifier trace events to generic code
> > KVM: x86/mmu: Drop trace_kvm_age_page() tracepoint
> > KVM: x86/mmu: Remove spurious clearing of dirty bit from TDP MMU SPTE
> > KVM: x86/mmu: Simplify code for aging SPTEs in TDP MMU
> > KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs
> > KVM: SVM: Do not set sev->es_active until KVM_SEV_ES_INIT completes
> > KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created
> > KVM: x86: Account a variety of miscellaneous allocations
> > KVM: Explicitly use GFP_KERNEL_ACCOUNT for 'struct kvm_vcpu' allocations
> > KVM: Assert that notifier count is elevated in .change_pte()
> > KVM: Move x86's MMU notifier memslot walkers to generic code
> > KVM: arm64: Convert to the gfn-based MMU notifier callbacks
> > KVM: MIPS/MMU: Convert to the gfn-based MMU notifier callbacks
> > KVM: PPC: Convert to the gfn-based MMU notifier callbacks
> > KVM: Kill off the old hva-based MMU notifier callbacks
> > KVM: Move MMU notifier's mmu_lock acquisition into common helper
> > KVM: Take mmu_lock when handling MMU notifier iff the hva hits a memslot
> > KVM: x86/mmu: Allow yielding during MMU notifier unmap/zap, if possible
> > KVM: SVM: Don't set current_vmcb->cpu when switching vmcb
> > KVM: SVM: Drop vcpu_svm.vmcb_pa
> > KVM: SVM: Add a comment to clarify what vcpu_svm.vmcb points at
> > KVM: SVM: Enhance and clean up the vmcb tracking comment in pre_svm_run()
> > KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU
> > KVM: Stop looking for coalesced MMIO zones if the bus is destroyed
> > KVM: Add proper lockdep assertion in I/O bus unregister
> > KVM: x86: Export kvm_mmu_gva_to_gpa_{read,write}() for SGX (VMX)
> > KVM: x86: Define new #PF SGX error code bit
> > KVM: x86: Add support for reverse CPUID lookup of scattered features
> > KVM: x86: Add reverse-CPUID lookup support for scattered SGX features
> > KVM: VMX: Add basic handling of VM-Exit from SGX enclave
> > KVM: VMX: Frame in ENCLS handler for SGX virtualization
> > KVM: VMX: Add SGX ENCLS[ECREATE] handler to enforce CPUID restrictions
> > KVM: VMX: Add emulation of SGX Launch Control LE hash MSRs
> > KVM: VMX: Add ENCLS[EINIT] handler to support SGX Launch Control (LC)
> > KVM: VMX: Enable SGX virtualization for SGX1, SGX2 and LC
> > KVM: x86: Add capability to grant VM access to privileged SGX attribute
> > crypto: ccp: Free SEV device if SEV init fails
> > crypto: ccp: Detect and reject "invalid" addresses destined for PSP
> > crypto: ccp: Reject SEV commands with mismatching command buffer
> > crypto: ccp: Play nice with vmalloc'd memory for SEV command structs
> > crypto: ccp: Use the stack for small SEV command buffers
> > crypto: ccp: Use the stack and common buffer for status commands
> > crypto: ccp: Use the stack and common buffer for INIT command
> > KVM: SVM: Allocate SEV command structures on local stack
> > KVM: x86: Fix implicit enum conversion goof in scattered reverse CPUID code
> > KVM: VMX: Invert the inlining of MSR interception helpers
> > KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported
> > KVM: SVM: Clear MSR_TSC_AUX[63:32] on write
> > KVM: SVM: Delay restoration of host MSR_TSC_AUX until return to userspace
> > KVM: VMX: Intercept FS/GS_BASE MSR accesses for 32-bit KVM
> > KVM: x86: Remove emulator's broken checks on CR0/CR3/CR4 loads
> > KVM: x86: Check CR3 GPA for validity regardless of vCPU mode
> > KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit mode
> > KVM: VMX: Truncate GPR value for DR and CR reads in !64-bit mode
> > KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit
> > KVM: nVMX: Truncate base/index GPR value on address calc in !64-bit
> > KVM: x86/xen: Drop RAX[63:32] when processing hypercall
> > KVM: SVM: Use default rAX size for INVLPGA emulation
> > KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
> > x86/sev: Drop redundant and potentially misleading 'sev_enabled'
> > KVM: SVM: Zero out the VMCB array used to track SEV ASID association
> > KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
> > KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
> > KVM: SVM: Move SEV module params/variables to sev.c
> > KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
> > KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
> > KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
> > KVM: SVM: Unconditionally invoke sev_hardware_teardown()
> > KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
> > KVM: SVM: Move SEV VMCB tracking allocation to sev.c
> > KVM: SVM: Drop redundant svm_sev_enabled() helper
> > KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
> > KVM: SVM: Skip SEV cache flush if no ASIDs have been used
> >
> > Shenming Lu (4):
> > irqchip/gic-v3-its: Drop the setting of PTZ altogether
> > KVM: arm64: GICv4.1: Add function to get VLPI state
> > KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables
> > KVM: arm64: GICv4.1: Give a chance to save VLPI state
> >
> > Steve Rutherford (1):
> > KVM: SVM: Add support for KVM_SEV_SEND_CANCEL command
> >
> > Suzuki K Poulose (15):
> > perf: aux: Add flags for the buffer format
> > perf: aux: Add CoreSight PMU buffer formats
> > arm64: Add support for trace synchronization barrier
> > KVM: arm64: Handle access to TRFCR_EL1
> > KVM: arm64: Move SPE availability check to VCPU load
> > arm64: KVM: Enable access to TRBE support for host
> > coresight: etm4x: Move ETM to prohibited region for disable
> > coresight: etm-perf: Allow an event to use different sinks
> > coresight: Do not scan for graph if none is present
> > coresight: etm4x: Add support for PE OS lock
> > coresight: ete: Add support for ETE sysreg access
> > coresight: ete: Add support for ETE tracing
> > dts: bindings: Document device tree bindings for ETE
> > coresight: etm-perf: Handle stale output handles
> > dts: bindings: Document device tree bindings for Arm TRBE
> >
> > Thomas Gleixner (1):
> > time: Add mechanism to recognize clocksource in time_get_snapshot
> >
> > Tom Lendacky (1):
> > KVM: SVM: Make sure GHCB is mapped before updating
> >
> > Uros Bizjak (1):
> > KVM/SVM: Move vmenter.S exception fixups out of line
> >
> > Vitaly Kuznetsov (3):
> > KVM: x86/vPMU: Forbid reading from MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
> > KVM: x86: Properly handle APF vs disabled LAPIC situation
> > KVM: selftests: Speed up set_memory_region_test
> >
> > Wang Wensheng (1):
> > KVM: arm64: Fix error return code in init_hyp_mode()
> >
> > Wanpeng Li (5):
> > x86/kvm: Don't bother __pv_cpu_mask when !CONFIG_SMP
> > KVM: X86: Count attempted/successful directed yield
> > KVM: X86: Do not yield to self
> > KVM: Boost vCPU candidate in user mode which is delivering interrupt
> > KVM: X86: Fix failure to boost kernel lock holder candidate in SEV-ES guests
> >
> > Wei Yongjun (2):
> > coresight: core: Make symbol 'csdev_sink' static
> > coresight: trbe: Fix return value check in arm_trbe_register_coresight_cpu()
> >
> > Will Deacon (5):
> > arm64: lib: Annotate {clear, copy}_page() as position-independent
> > KVM: arm64: Link position-independent string routines into .hyp.text
> > arm64: kvm: Add standalone ticket spinlock implementation for use at hyp
> > arm/arm64: Probe for the presence of KVM hypervisor
> > KVM: arm64: Advertise KVM UID to guests via SMCCC
> >
> > Xiaofei Tan (1):
> > arm64: sve: Provide sve_cond_update_zcr_vq fallback when !ARM64_SVE
> >
> > Xu Jia (1):
> > KVM: arm64: Make symbol '_kvm_host_prot_finalize' static
> >
> > Yanan Wang (8):
> > tools/headers: sync headers of asm-generic/hugetlb_encode.h
> > KVM: selftests: Print the errno besides error-string in TEST_ASSERT
> > KVM: selftests: Make a generic helper to get vm guest mode strings
> > KVM: selftests: Add a helper to get system configured THP page size
> > KVM: selftests: Add a helper to get system default hugetlb page size
> > KVM: selftests: List all hugetlb src types specified with page sizes
> > KVM: selftests: Adapt vm_userspace_mem_region_add to new helpers
> > KVM: selftests: Add a test for kvm page table code
> >
> > Yang Yingliang (1):
> > KVM: selftests: remove redundant semi-colon
> >
> > Zenghui Yu (2):
> > KVM: arm64: GICv4.1: Restore VLPI pending state to physical side
> > KVM: arm64: Fix Function ID typo for PTP_KVM service
> >
> > Zhenzhong Duan (1):
> > selftests: kvm: Fix the check of return value
> >
> > .../ABI/testing/sysfs-bus-coresight-devices-trbe | 14 +
> > Documentation/devicetree/bindings/arm/ete.yaml | 75 ++
> > Documentation/devicetree/bindings/arm/trbe.yaml | 49 +
> > Documentation/trace/coresight/coresight-trbe.rst | 38 +
> > Documentation/virt/kvm/amd-memory-encryption.rst | 143 +++
> > Documentation/virt/kvm/api.rst | 214 +++-
> > Documentation/virt/kvm/arm/index.rst | 1 +
> > Documentation/virt/kvm/arm/ptp_kvm.rst | 25 +
> > Documentation/virt/kvm/devices/arm-vgic-its.rst | 2 +-
> > Documentation/virt/kvm/devices/arm-vgic-v3.rst | 2 +-
> > Documentation/virt/kvm/locking.rst | 49 +-
> > Documentation/virt/kvm/s390-diag.rst | 33 +
> > MAINTAINERS | 6 +-
> > arch/arm/include/asm/hypervisor.h | 3 +
> > arch/arm64/include/asm/assembler.h | 27 +-
> > arch/arm64/include/asm/barrier.h | 1 +
> > arch/arm64/include/asm/el2_setup.h | 13 +
> > arch/arm64/include/asm/fpsimd.h | 11 +
> > arch/arm64/include/asm/fpsimdmacros.h | 10 +-
> > arch/arm64/include/asm/hyp_image.h | 7 +
> > arch/arm64/include/asm/hypervisor.h | 3 +
> > arch/arm64/include/asm/kvm_arm.h | 2 +
> > arch/arm64/include/asm/kvm_asm.h | 9 +
> > arch/arm64/include/asm/kvm_host.h | 55 +-
> > arch/arm64/include/asm/kvm_hyp.h | 14 +-
> > arch/arm64/include/asm/kvm_mmu.h | 25 +-
> > arch/arm64/include/asm/kvm_pgtable.h | 164 ++-
> > arch/arm64/include/asm/pgtable-prot.h | 4 +-
> > arch/arm64/include/asm/sections.h | 1 +
> > arch/arm64/include/asm/sysreg.h | 59 +-
> > arch/arm64/kernel/asm-offsets.c | 3 +
> > arch/arm64/kernel/cpu-reset.S | 5 +-
> > arch/arm64/kernel/hyp-stub.S | 3 +-
> > arch/arm64/kernel/image-vars.h | 34 +-
> > arch/arm64/kernel/vmlinux.lds.S | 74 +-
> > arch/arm64/kvm/arm.c | 220 +++-
> > arch/arm64/kvm/debug.c | 118 +-
> > arch/arm64/kvm/fpsimd.c | 26 +-
> > arch/arm64/kvm/guest.c | 11 +-
> > arch/arm64/kvm/handle_exit.c | 45 +
> > arch/arm64/kvm/hyp/Makefile | 2 +-
> > arch/arm64/kvm/hyp/fpsimd.S | 10 +
> > arch/arm64/kvm/hyp/include/hyp/switch.h | 107 +-
> > arch/arm64/kvm/hyp/include/nvhe/early_alloc.h | 14 +
> > arch/arm64/kvm/hyp/include/nvhe/gfp.h | 68 ++
> > arch/arm64/kvm/hyp/include/nvhe/mem_protect.h | 36 +
> > arch/arm64/kvm/hyp/include/nvhe/memory.h | 51 +
> > arch/arm64/kvm/hyp/include/nvhe/mm.h | 96 ++
> > arch/arm64/kvm/hyp/include/nvhe/spinlock.h | 92 ++
> > arch/arm64/kvm/hyp/nvhe/Makefile | 9 +-
> > arch/arm64/kvm/hyp/nvhe/cache.S | 13 +
> > arch/arm64/kvm/hyp/nvhe/debug-sr.c | 56 +-
> > arch/arm64/kvm/hyp/nvhe/early_alloc.c | 54 +
> > arch/arm64/kvm/hyp/nvhe/gen-hyprel.c | 18 +
> > arch/arm64/kvm/hyp/nvhe/host.S | 18 +-
> > arch/arm64/kvm/hyp/nvhe/hyp-init.S | 54 +-
> > arch/arm64/kvm/hyp/nvhe/hyp-main.c | 75 +-
> > arch/arm64/kvm/hyp/nvhe/hyp-smp.c | 6 +-
> > arch/arm64/kvm/hyp/nvhe/hyp.lds.S | 1 +
> > arch/arm64/kvm/hyp/nvhe/mem_protect.c | 279 +++++
> > arch/arm64/kvm/hyp/nvhe/mm.c | 173 +++
> > arch/arm64/kvm/hyp/nvhe/page_alloc.c | 195 ++++
> > arch/arm64/kvm/hyp/nvhe/psci-relay.c | 4 +-
> > arch/arm64/kvm/hyp/nvhe/setup.c | 214 ++++
> > arch/arm64/kvm/hyp/nvhe/stub.c | 22 +
> > arch/arm64/kvm/hyp/nvhe/switch.c | 26 +-
> > arch/arm64/kvm/hyp/nvhe/tlb.c | 4 +-
> > arch/arm64/kvm/hyp/pgtable.c | 410 +++++--
> > arch/arm64/kvm/hyp/reserved_mem.c | 113 ++
> > arch/arm64/kvm/hyp/vhe/switch.c | 4 +-
> > arch/arm64/kvm/hypercalls.c | 80 +-
> > arch/arm64/kvm/mmu.c | 254 +++--
> > arch/arm64/kvm/perf.c | 7 +-
> > arch/arm64/kvm/pmu-emul.c | 2 +-
> > arch/arm64/kvm/pmu.c | 8 +-
> > arch/arm64/kvm/reset.c | 51 +-
> > arch/arm64/kvm/sys_regs.c | 16 +
> > arch/arm64/kvm/trace_arm.h | 66 --
> > arch/arm64/kvm/va_layout.c | 7 +
> > arch/arm64/kvm/vgic/vgic-init.c | 12 +-
> > arch/arm64/kvm/vgic/vgic-its.c | 6 +-
> > arch/arm64/kvm/vgic/vgic-kvm-device.c | 7 +-
> > arch/arm64/kvm/vgic/vgic-mmio-v3.c | 81 +-
> > arch/arm64/kvm/vgic/vgic-mmio.c | 10 +-
> > arch/arm64/kvm/vgic/vgic-v3.c | 66 +-
> > arch/arm64/kvm/vgic/vgic-v4.c | 38 +
> > arch/arm64/kvm/vgic/vgic.h | 2 +
> > arch/arm64/lib/clear_page.S | 4 +-
> > arch/arm64/lib/copy_page.S | 4 +-
> > arch/arm64/mm/init.c | 3 +
> > arch/mips/include/asm/kvm_host.h | 17 +-
> > arch/mips/kvm/mips.c | 21 +-
> > arch/mips/kvm/mmu.c | 100 +-
> > arch/mips/kvm/trap_emul.c | 13 +-
> > arch/mips/kvm/vz.c | 19 +-
> > arch/powerpc/include/asm/kvm_book3s.h | 12 +-
> > arch/powerpc/include/asm/kvm_host.h | 7 -
> > arch/powerpc/include/asm/kvm_ppc.h | 9 +-
> > arch/powerpc/kvm/book3s.c | 18 +-
> > arch/powerpc/kvm/book3s.h | 10 +-
> > arch/powerpc/kvm/book3s_64_mmu_hv.c | 98 +-
> > arch/powerpc/kvm/book3s_64_mmu_radix.c | 25 +-
> > arch/powerpc/kvm/book3s_hv.c | 12 +-
> > arch/powerpc/kvm/book3s_pr.c | 56 +-
> > arch/powerpc/kvm/e500_mmu_host.c | 29 +-
> > arch/powerpc/kvm/trace_booke.h | 15 -
> > arch/s390/include/asm/kvm_host.h | 5 +
> > arch/s390/include/asm/smp.h | 1 +
> > arch/s390/kernel/smp.c | 1 +
> > arch/s390/kvm/diag.c | 31 +-
> > arch/s390/kvm/gaccess.c | 30 +-
> > arch/s390/kvm/gaccess.h | 60 +-
> > arch/s390/kvm/kvm-s390.c | 15 +-
> > arch/s390/kvm/kvm-s390.h | 8 +
> > arch/s390/kvm/vsie.c | 109 +-
> > arch/sh/kernel/perf_event.c | 18 -
> > arch/x86/include/asm/cpufeatures.h | 1 +
> > arch/x86/include/asm/kvm_host.h | 67 +-
> > arch/x86/include/asm/mem_encrypt.h | 1 -
> > arch/x86/include/asm/svm.h | 4 +-
> > arch/x86/include/asm/vmx.h | 1 +
> > arch/x86/include/uapi/asm/vmx.h | 1 +
> > arch/x86/kernel/kvm.c | 118 +-
> > arch/x86/kvm/Makefile | 2 +
> > arch/x86/kvm/cpuid.c | 98 +-
> > arch/x86/kvm/cpuid.h | 155 +--
> > arch/x86/kvm/emulate.c | 80 +-
> > arch/x86/kvm/kvm_cache_regs.h | 19 +-
> > arch/x86/kvm/lapic.c | 8 +-
> > arch/x86/kvm/mmu.h | 23 +-
> > arch/x86/kvm/mmu/mmu.c | 637 ++++++-----
> > arch/x86/kvm/mmu/mmu_audit.c | 2 +-
> > arch/x86/kvm/mmu/mmu_internal.h | 44 +-
> > arch/x86/kvm/mmu/paging_tmpl.h | 3 +-
> > arch/x86/kvm/mmu/spte.c | 159 ++-
> > arch/x86/kvm/mmu/spte.h | 141 ++-
> > arch/x86/kvm/mmu/tdp_mmu.c | 740 +++++++------
> > arch/x86/kvm/mmu/tdp_mmu.h | 51 +-
> > arch/x86/kvm/reverse_cpuid.h | 186 ++++
> > arch/x86/kvm/svm/avic.c | 24 +-
> > arch/x86/kvm/svm/nested.c | 573 ++++++----
> > arch/x86/kvm/svm/sev.c | 922 ++++++++++++----
> > arch/x86/kvm/svm/svm.c | 1107 +++++++++----------
> > arch/x86/kvm/svm/svm.h | 91 +-
> > arch/x86/kvm/svm/vmenter.S | 47 +-
> > arch/x86/kvm/vmx/nested.c | 83 +-
> > arch/x86/kvm/vmx/nested.h | 5 +
> > arch/x86/kvm/vmx/sgx.c | 502 +++++++++
> > arch/x86/kvm/vmx/sgx.h | 34 +
> > arch/x86/kvm/vmx/vmcs12.c | 1 +
> > arch/x86/kvm/vmx/vmcs12.h | 4 +-
> > arch/x86/kvm/vmx/vmx.c | 432 ++++----
> > arch/x86/kvm/vmx/vmx.h | 39 +-
> > arch/x86/kvm/vmx/vmx_ops.h | 4 +
> > arch/x86/kvm/x86.c | 214 +++-
> > arch/x86/kvm/x86.h | 18 +-
> > arch/x86/mm/mem_encrypt.c | 10 +-
> > arch/x86/mm/mem_encrypt_identity.c | 1 -
> > drivers/clocksource/arm_arch_timer.c | 36 +
> > drivers/crypto/ccp/sev-dev.c | 193 ++--
> > drivers/crypto/ccp/sev-dev.h | 4 +-
> > drivers/firmware/psci/psci.c | 2 +
> > drivers/firmware/smccc/Makefile | 2 +-
> > drivers/firmware/smccc/kvm_guest.c | 50 +
> > drivers/firmware/smccc/smccc.c | 1 +
> > drivers/hwtracing/coresight/Kconfig | 24 +-
> > drivers/hwtracing/coresight/Makefile | 1 +
> > drivers/hwtracing/coresight/coresight-core.c | 29 +-
> > drivers/hwtracing/coresight/coresight-etm-perf.c | 119 +-
> > drivers/hwtracing/coresight/coresight-etm4x-core.c | 161 ++-
> > .../hwtracing/coresight/coresight-etm4x-sysfs.c | 19 +-
> > drivers/hwtracing/coresight/coresight-etm4x.h | 83 +-
> > drivers/hwtracing/coresight/coresight-platform.c | 6 +
> > drivers/hwtracing/coresight/coresight-priv.h | 3 +
> > drivers/hwtracing/coresight/coresight-trbe.c | 1157 ++++++++++++++++++++
> > drivers/hwtracing/coresight/coresight-trbe.h | 152 +++
> > drivers/irqchip/irq-gic-v3-its.c | 18 +-
> > drivers/perf/arm_pmu.c | 30 -
> > drivers/ptp/Kconfig | 2 +-
> > drivers/ptp/Makefile | 2 +
> > drivers/ptp/ptp_kvm_arm.c | 28 +
> > drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 85 +-
> > drivers/ptp/ptp_kvm_x86.c | 97 ++
> > include/kvm/arm_pmu.h | 4 +
> > include/kvm/arm_vgic.h | 1 +
> > include/linux/arm-smccc.h | 41 +
> > include/linux/bug.h | 10 +
> > include/linux/clocksource.h | 6 +
> > include/linux/clocksource_ids.h | 12 +
> > include/linux/coresight.h | 13 +
> > include/linux/kvm_host.h | 24 +-
> > include/linux/perf_event.h | 2 -
> > include/linux/psp-sev.h | 18 +-
> > include/linux/ptp_kvm.h | 19 +
> > include/linux/timekeeping.h | 12 +-
> > include/trace/events/kvm.h | 90 +-
> > include/uapi/linux/kvm.h | 45 +
> > include/uapi/linux/perf_event.h | 13 +-
> > kernel/events/core.c | 5 -
> > kernel/time/clocksource.c | 2 +
> > kernel/time/timekeeping.c | 1 +
> > lib/bug.c | 54 +-
> > tools/include/asm-generic/hugetlb_encode.h | 3 +
> > tools/testing/selftests/kvm/.gitignore | 2 +
> > tools/testing/selftests/kvm/Makefile | 4 +
> > tools/testing/selftests/kvm/aarch64/vgic_init.c | 551 ++++++++++
> > tools/testing/selftests/kvm/dirty_log_test.c | 69 +-
> > tools/testing/selftests/kvm/include/kvm_util.h | 13 +-
> > tools/testing/selftests/kvm/include/test_util.h | 21 +-
> > tools/testing/selftests/kvm/kvm_page_table_test.c | 506 +++++++++
> > tools/testing/selftests/kvm/lib/assert.c | 4 +-
> > tools/testing/selftests/kvm/lib/kvm_util.c | 138 ++-
> > tools/testing/selftests/kvm/lib/test_util.c | 163 ++-
> > .../testing/selftests/kvm/set_memory_region_test.c | 61 +-
> > .../testing/selftests/kvm/x86_64/xen_shinfo_test.c | 2 +-
> > virt/kvm/coalesced_mmio.c | 19 +-
> > virt/kvm/kvm_main.c | 303 +++--
> > 217 files changed, 12444 insertions(+), 4028 deletions(-)
> >
> >
> > diff --combined arch/x86/kernel/kvm.c
> > index 5d32fa477a62,bd01a6131edf..000000000000
> > --- a/arch/x86/kernel/kvm.c
> > +++ b/arch/x86/kernel/kvm.c
> > @@@ -574,6 -574,49 +574,54 @@@ static void kvm_smp_send_call_func_ipi(
> > }
> > }
> > -static void kvm_flush_tlb_others(const struct cpumask *cpumask,
> > ++static void kvm_flush_tlb_multi(const struct cpumask *cpumask,
> > + const struct flush_tlb_info *info)
> > + {
> > + u8 state;
> > + int cpu;
> > + struct kvm_steal_time *src;
> > + struct cpumask *flushmask = this_cpu_cpumask_var_ptr(__pv_cpu_mask);
> > +
> > + cpumask_copy(flushmask, cpumask);
> > + /*
> > + * We have to call flush only on online vCPUs. And
> > + * queue flush_on_enter for pre-empted vCPUs
> > + */
> > + for_each_cpu(cpu, flushmask) {
> > ++ /*
> > ++ * The local vCPU is never preempted, so we do not explicitly
> > ++ * skip check for local vCPU - it will never be cleared from
> > ++ * flushmask.
> > ++ */
> > + src = &per_cpu(steal_time, cpu);
> > + state = READ_ONCE(src->preempted);
> > + if ((state & KVM_VCPU_PREEMPTED)) {
> > + if (try_cmpxchg(&src->preempted, &state,
> > + state | KVM_VCPU_FLUSH_TLB))
> > + __cpumask_clear_cpu(cpu, flushmask);
> > + }
> > + }
> > +
> > - native_flush_tlb_others(flushmask, info);
> > ++ native_flush_tlb_multi(flushmask, info);
> > + }
> > +
> > + static __init int kvm_alloc_cpumask(void)
> > + {
> > + int cpu;
> > +
> > + if (!kvm_para_available() || nopv)
> > + return 0;
> > +
> > + if (pv_tlb_flush_supported() || pv_ipi_supported())
> > + for_each_possible_cpu(cpu) {
> > + zalloc_cpumask_var_node(per_cpu_ptr(&__pv_cpu_mask, cpu),
> > + GFP_KERNEL, cpu_to_node(cpu));
> > + }
> > +
> > + return 0;
> > + }
> > + arch_initcall(kvm_alloc_cpumask);
> > +
> > static void __init kvm_smp_prepare_boot_cpu(void)
> > {
> > /*
> > @@@ -611,38 -654,8 +659,8 @@@ static int kvm_cpu_down_prepare(unsigne
> > local_irq_enable();
> > return 0;
> > }
> > - #endif
> > -
> > - static void kvm_flush_tlb_multi(const struct cpumask *cpumask,
> > - const struct flush_tlb_info *info)
> > - {
> > - u8 state;
> > - int cpu;
> > - struct kvm_steal_time *src;
> > - struct cpumask *flushmask = this_cpu_cpumask_var_ptr(__pv_cpu_mask);
> > -
> > - cpumask_copy(flushmask, cpumask);
> > - /*
> > - * We have to call flush only on online vCPUs. And
> > - * queue flush_on_enter for pre-empted vCPUs
> > - */
> > - for_each_cpu(cpu, flushmask) {
> > - /*
> > - * The local vCPU is never preempted, so we do not explicitly
> > - * skip check for local vCPU - it will never be cleared from
> > - * flushmask.
> > - */
> > - src = &per_cpu(steal_time, cpu);
> > - state = READ_ONCE(src->preempted);
> > - if ((state & KVM_VCPU_PREEMPTED)) {
> > - if (try_cmpxchg(&src->preempted, &state,
> > - state | KVM_VCPU_FLUSH_TLB))
> > - __cpumask_clear_cpu(cpu, flushmask);
> > - }
> > - }
> > - native_flush_tlb_multi(flushmask, info);
> > - }
> > + #endif
> > static void __init kvm_guest_init(void)
> > {
> > @@@ -655,15 -668,9 +673,9 @@@
> > if (kvm_para_has_feature(KVM_FEATURE_STEAL_TIME)) {
> > has_steal_clock = 1;
> > - pv_ops.time.steal_clock = kvm_steal_clock;
> > + static_call_update(pv_steal_clock, kvm_steal_clock);
> > }
> > - if (pv_tlb_flush_supported()) {
> > - pv_ops.mmu.flush_tlb_multi = kvm_flush_tlb_multi;
> > - pv_ops.mmu.tlb_remove_table = tlb_remove_table;
> > - pr_info("KVM setup pv remote TLB flush\n");
> > - }
> > -
> > if (kvm_para_has_feature(KVM_FEATURE_PV_EOI))
> > apic_set_eoi_write(kvm_guest_apic_eoi_write);
> > @@@ -673,6 -680,12 +685,12 @@@
> > }
> > #ifdef CONFIG_SMP
> > + if (pv_tlb_flush_supported()) {
> > - pv_ops.mmu.flush_tlb_others = kvm_flush_tlb_others;
> > ++ pv_ops.mmu.flush_tlb_multi = kvm_flush_tlb_multi;
> > + pv_ops.mmu.tlb_remove_table = tlb_remove_table;
> > + pr_info("KVM setup pv remote TLB flush\n");
> > + }
> > +
> > smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu;
> > if (pv_sched_yield_supported()) {
> > smp_ops.send_call_func_ipi = kvm_smp_send_call_func_ipi;
> >
>

\
 
 \ /
  Last update: 2021-05-03 17:26    [W:1.173 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site