lkml.org 
[lkml]   [2021]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/5] dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor
Date
Document the bindings used for the SK Hynix Hi-846 CMOS camera driver.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
.../bindings/media/i2c/hynix,hi846.yaml | 99 +++++++++++++++++++
1 file changed, 99 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
new file mode 100644
index 000000000000..2991108e23e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/hynix,hi846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SK Hynix Hi-846 1/4" 8M Pixel MIPI CSI-2 sensor
+
+maintainers:
+ - Martin Kepplinger <martin.kepplinger@puri.sm>
+
+description: |-
+ The Hi-846 is a raw image sensor with an MIPI CSI-2 image data
+ interface and CCI (I2C compatible) control bus. The output format
+ is 10bit Bayer.
+
+properties:
+ compatible:
+ const: hynix,hi846
+
+ reg:
+ description: I2C device address.
+ maxItems: 1
+
+ clocks:
+ description: Reference to the mclk clock.
+ maxItems: 1
+
+ clock-names:
+ const: mclk
+
+ rst-gpios:
+ description: Reference to the GPIO connected to the reset pin. Active low.
+ maxItems: 1
+
+ vdd-supply:
+ description: Definition of the regulator used as 1.8V digital power supply.
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - items:
+ - const: 1
+ - const: 2
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - rst-gpios
+ - vdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hi846: camera@20 {
+ compatible = "hynix,hi846";
+ reg = <0x20>;
+ clocks = <&clk>;
+ clock-names = "mclk";
+ vdd-supply = <&reg_camera_pwr_en>; /* 1.8v */
+ rst-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+ port {
+ camera_out: endpoint {
+ remote-endpoint = <&csi1_ep1>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+ };
+
+...
--
2.30.2
\
 
 \ /
  Last update: 2021-05-28 10:14    [W:2.345 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site