lkml.org 
[lkml]   [2021]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: watchdog: sama5d4-wdt: convert to yaml
Date
Convert the old txt binding to yaml format.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
.../bindings/watchdog/atmel,sama5d4-wdt.yaml | 73 +++++++++++++++++++
.../bindings/watchdog/atmel-sama5d4-wdt.txt | 34 ---------
2 files changed, 73 insertions(+), 34 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
delete mode 100644 Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
new file mode 100644
index 000000000000..0d0ab81da040
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/atmel,sama5d4-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel SAMA5D4 Watchdog Timer (WDT) Controller
+
+maintainers:
+ - Eugen Hristev <eugen.hristev@microchip.com>
+
+allOf:
+ - $ref: "watchdog.yaml#"
+
+properties:
+ compatible:
+ enum:
+ - atmel,sama5d4-wdt
+ - microchip,sam9x60-wdt
+
+ reg:
+ maxItems: 1
+
+ atmel,watchdog-type:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: should be hardware or software.
+ oneOf:
+ - description:
+ Enable watchdog fault reset. A watchdog fault triggers
+ watchdog reset.
+ const: hardware
+ - description:
+ Enable watchdog fault interrupt. A watchdog fault asserts
+ watchdog interrupt.
+ const: software
+ default: hardware
+
+ atmel,idle-halt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ present if you want to stop the watchdog when the CPU is in idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stop working while it is in idle state, which is probably
+ not what you want.
+
+ atmel,dbg-halt:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ present if you want to stop the watchdog when the CPU is in debug state.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ watchdog@fc068640 {
+ compatible = "atmel,sama5d4-wdt";
+ reg = <0xfc068640 0x10>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
+ timeout-sec = <10>;
+ atmel,watchdog-type = "hardware";
+ atmel,dbg-halt;
+ atmel,idle-halt;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
deleted file mode 100644
index 44727fcc2729..000000000000
--- a/Documentation/devicetree/bindings/watchdog/atmel-sama5d4-wdt.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-* Atmel SAMA5D4 Watchdog Timer (WDT) Controller
-
-Required properties:
-- compatible: "atmel,sama5d4-wdt" or "microchip,sam9x60-wdt"
-- reg: base physical address and length of memory mapped region.
-
-Optional properties:
-- timeout-sec: watchdog timeout value (in seconds).
-- interrupts: interrupt number to the CPU.
-- atmel,watchdog-type: should be "hardware" or "software".
- "hardware": enable watchdog fault reset. A watchdog fault triggers
- watchdog reset.
- "software": enable watchdog fault interrupt. A watchdog fault asserts
- watchdog interrupt.
-- atmel,idle-halt: present if you want to stop the watchdog when the CPU is
- in idle state.
- CAUTION: This property should be used with care, it actually makes the
- watchdog not counting when the CPU is in idle state, therefore the
- watchdog reset time depends on mean CPU usage and will not reset at all
- if the CPU stop working while it is in idle state, which is probably
- not what you want.
-- atmel,dbg-halt: present if you want to stop the watchdog when the CPU is
- in debug state.
-
-Example:
- watchdog@fc068640 {
- compatible = "atmel,sama5d4-wdt";
- reg = <0xfc068640 0x10>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 5>;
- timeout-sec = <10>;
- atmel,watchdog-type = "hardware";
- atmel,dbg-halt;
- atmel,idle-halt;
- };
--
2.25.1
\
 
 \ /
  Last update: 2021-05-27 12:02    [W:0.129 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site