lkml.org 
[lkml]   [2021]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [BUG] rockpro64: PCI BAR reassignment broken by commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
On Tue, 25 May 2021 at 22:03, Peter Geis <pgwipeout@gmail.com> wrote:
>
> On Tue, May 25, 2021 at 3:43 PM Ard Biesheuvel <ardb@kernel.org> wrote:
> >
> > On Tue, 25 May 2021 at 21:15, Bjorn Helgaas <helgaas@kernel.org> wrote:
> > >
> > > On Tue, May 25, 2021 at 05:54:56PM +0200, Ard Biesheuvel wrote:
> > > > On Tue, 25 May 2021 at 17:34, Peter Geis <pgwipeout@gmail.com> wrote:
> > >
> > > > > > > >> > On 2021-05-18 10:09, Alexandru Elisei wrote:
> > > > > > > >> >> [..]
> > > > > > > >> >> [ 0.305183] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
> > > > > > > >> >> [ 0.305248] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
> > > > > > > >> >> [ 0.305285] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
> > > > > > > >> >> [ 0.373705] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
> > > > > > > >> >> [ 0.373730] pci_bus 0000:00: root bus resource [bus 00-1f]
> > > > > > > >> >> [ 0.373751] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff 64bit]
> > > > > > > >> >> [ 0.373777] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
> > >
> > > > ... For some reason, lspci translates the BAR values to CPU
> > > > addresses, but the PCI side addresses are within 32-bits.
> > >
> > > lspci shows BARs as CPU physical addresses by default. These are the
> > > same addresses you would see in pdev->resource[n] and the same as BAR
> > > values you would see in dmesg.
> > >
> > > A 64-bit CPU physical address can certainly be translated by the host
> > > bridge to a 32-bit PCI address. But that's not happening here because
> > > this host bridge applies no translation (CPU physical 0xfa000000 maps
> > > to bus address 0xfa000000).
> > >
> > > "lspci -b" shows the PCI bus addresses.
> >
> > Ah, thanks.
> >
> > It does seem, though, that the information overload in this thread is
> > causing confusion now. Peter shared some log output where there is
> > definitely MMIO translation being applied.
>
> Yes, I've done work on the rk3399 pcie controller which is why this
> caught my attention.
> The original issue still seems to exist:
> For some reason:
> commit 9d57e61bf723 ("of/pci: Add IORESOURCE_MEM_64 to resource flags for
> 64-bit memory addresses")
> causes allocation issues now.
> The original description of the issue aligned with issues I was having
> bringing up the rk356x pcie controller.
>
> >
> > > > [ 6.673497] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
> > > > (bus address [0x3f700000-0x3f7fffff])
> > > > [ 6.674642] pci_bus 0000:00: root bus resource [mem
> > > > 0x300000000-0x33f6fffff] (bus address [0x00000000-0x3f6fffff])
> >
> > In this case, the I/O translation definitely looks wrong. On a typical
> > ARM DT system, you will see something like
> >
> > [ 1.500324] Remapped I/O 0x0000000067f00000 to [io 0x0000-0xffff window]
> > [ 1.500522] pci_bus 0000:00: root bus resource [io 0x0000-0xffff window]
> >
> > The MMIO window looks correct, but I suspect that both 0x82000000 and
> > 0x83000000 in the DT ranges are describing the resource window as
> > prefetchable, preventing the allocation of non-prefetchable BARs in
> > this window.
>
> I checked with lspci -vvvbxxxxnn:
>
> Before your changes:
> 00:00.0 PCI bridge [0604]: Fuzhou Rockchip Electronics Co., Ltd Device
> [1d87:3566] (rev 01) (prog-if 00 [Normal decode])
> I/O behind bridge: 00001000-00001fff [size=4K]
> Memory behind bridge: 50000000-500fffff [size=1M]
> Prefetchable memory behind bridge:
> 0000000040000000-000000004fffffff [size=256M]
> 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc.
> [AMD/ATI] Turks PRO [Radeon HD 7570] [1002:675d] (prog-if 00 [VGA
> controller])
> Region 0: Memory at 40000000 (64-bit, prefetchable)
> Region 2: Memory at 50000000 (64-bit, non-prefetchable)
> Region 4: I/O ports at 7f701000
> Expansion ROM at 50020000 [disabled]
>
> After your changes:
> lspci -vvvbxxxxnn
> 00:00.0 PCI bridge: Fuzhou Rockchip Electronics Co., Ltd Device 3566
> (rev 01) (prog-if 00 [Normal decode])
> I/O behind bridge: 00001000-00001fff [size=4K]
> Memory behind bridge: 10000000-100fffff [size=1M]
> Prefetchable memory behind bridge:
> 0000000000000000-000000000fffffff [size=256M]
> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
> [AMD/ATI] Turks PRO [Radeon HD 7570] (prog-if 00 [VGA controller])
> Region 0: Memory at <unassigned> (64-bit, prefetchable) [virtual]
> Region 2: Memory at 10000000 (64-bit, non-prefetchable) [virtual]
> Region 4: I/O ports at 1000 [virtual]
> Expansion ROM at 10020000 [disabled]
>
> >
> > Peter, for the configuration listed here, could you try something like
> >
> > ranges = <0x1000000 0x0 0x0 [IO base in the CPU address map] [IO size]>,
> > <0x2000000 0x0 0x0 [MMIO base in the CPU address map] [MMIO size]>;
>
> That was similar to what I already had, removing the relocatable flag
> and setting both addresses to 0x0 are the changes.
>
> Here is the result:

<snip>

I'm not sure which conclusion I am supposed to draw from that output.

Are you saying the output looks ok but the GPU card does not work?

Is your system DMA coherent? I would not be very optimistic about
these drivers working out of the box on non-coherent systems.

\
 
 \ /
  Last update: 2021-05-26 16:19    [W:0.343 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site