lkml.org 
[lkml]   [2021]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v5 00/16] Allwinner MIPI CSI-2 support for A31/V3s/A83T
    From
    Date
    Hi Paul,

    On 15/01/2021 21:01, Paul Kocialkowski wrote:
    > This series introduces support for MIPI CSI-2, with the A31 controller that is
    > found on most SoCs (A31, V3s and probably V5) as well as the A83T-specific
    > controller. While the former uses the same MIPI D-PHY that is already supported
    > for DSI, the latter embeds its own D-PHY.
    >
    > In order to distinguish the use of the D-PHY between Rx mode (for MIPI CSI-2)
    > and Tx mode (for MIPI DSI), a submode is introduced for D-PHY in the PHY API.
    > This allows adding Rx support in the A31 D-PHY driver.
    >
    > A few changes and fixes are applied to the A31 CSI controller driver, in order
    > to support the MIPI CSI-2 use-case.

    Besides the compile error for patch 2/16, I also get several other compile errors:

    drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c: In function ‘sun6i_csi_v4l2_fwnode_init’:
    ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
    207 | ((type *) \
    | ^
    drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:790:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
    790 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier,
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
    207 | ((type *) \
    | ^
    drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c:811:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
    811 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(&csi->notifier,
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    make[5]: *** [scripts/Makefile.build:272: drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.o] Error 1
    make[5]: *** Waiting for unfinished jobs....
    make[4]: *** [scripts/Makefile.build:272: drivers/media/platform/rockchip/rkisp1/rkisp1-isp.o] Error 1
    make[3]: *** [scripts/Makefile.build:515: drivers/media/platform/rockchip/rkisp1] Error 2
    make[3]: *** Waiting for unfinished jobs....
    In file included from ./include/media/v4l2-subdev.h:14,
    from ./include/media/v4l2-device.h:13,
    from drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:19:
    drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c: In function ‘sun8i_a83t_mipi_csi2_v4l2_setup’:
    ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
    207 | ((type *) \
    | ^
    drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c:495:8: note: in expansion of macro
    ‘v4l2_async_notifier_add_fwnode_remote_subdev’
    495 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from ./include/media/v4l2-subdev.h:14,
    from ./include/media/v4l2-device.h:13,
    from drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:18:
    drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c: In function ‘sun6i_mipi_csi2_v4l2_setup’:
    ./include/media/v4l2-async.h:207:10: error: expected expression before ‘)’ token
    207 | ((type *) \
    | ^
    drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c:437:8: note: in expansion of macro ‘v4l2_async_notifier_add_fwnode_remote_subdev’
    437 | ret = v4l2_async_notifier_add_fwnode_remote_subdev(notifier, handle,
    | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Can you rebase this series?

    I also need Acked-by's for patches 1-3 from one of the PHY maintainers, but as
    you mentioned this might need to change as well.

    Was there a reason why I haven't looked at this before? It's quite an old series,
    usually I don't wait for so long. If it was because I was really slow, then I
    apologize and please kick me sooner if you see a review like this take so long.

    Regards,

    Hans

    >
    > Changes since v4:
    > - Added patch to stop using v4l2_async_notifier_parse_fwnode_endpoints;
    > - Fixed checkpatch strict issues (parenthesis alignment);
    > - Fixed runtime PM call order and disable;
    > - Fixed fwnode_handle_put order;
    > - Brought back phy-names for A31 since it's mandatory according to the generic
    > PHY binding and needed by the code;
    > - Added collected tags.
    >
    > Changes since v3:
    > - Fixed single-item phys description in sun6i mipi csi-2 binding;
    > - Fixed variables names in macros using container_of;
    > - Fixed style issue with operators at the end of lines;
    > - Reworked source endpoint/subdev assignment in sun6i-csi to handle
    > link_validate error case;
    > - Removed unrelated dt change in sun8i-a83t mipi csi-2 driver;
    > - Added collected tags.
    >
    > Changes since v2:
    > - added Kconfig depend on PM since it's not optional;
    > - removed phy-names for A31 MIPI CSI-2 controller;
    > - removed v3s compatible in the A31 MIPI CSI-2 controller driver;
    > - removed A31 CSI controller single-port binding deprecation;
    > - removed empty dt port definitions;
    > - fixed minor checkpatch warnings;
    > - added collected tags;
    > - added media-ctl output in cover letter.
    >
    > Changes since v1:
    > - reworked fwnode and media graph on the CSI controller end to have one port
    > per interface, which solves the bus type representation issue;
    > - removed unused IRQ handlers in the MIPI CSI-2 bridges;
    > - avoided the use of devm_regmap_init_mmio_clk;
    > - deasserted reset before enabling clocks;
    > - fixed reported return code issues (ret |=, missing checks);
    > - applied requested cosmetic changes (backward goto, etc);
    > - switched over to runtime PM for the mipi csi-2 bridge drivers;
    > - selected PHY_SUN6I_MIPI_DPHY in Kconfig for sun6i-mipi-csi2;
    > - registered nodes with mipi csi-2 bridge subdevs;
    > - used V4L2 format info instead of switch/case for sun6i-csi bpp;
    > - fixed device-tree bindings as requested (useless properties, license);
    > - fixed mipi bridge dt instances names;
    > - added PHY API documentation about mode/power on order requirement;
    > - fixed clock error return code in d-phy code;
    > - fixed D-PHY mode check in d-phy code;
    > - added MAINTAINERS entries for the new drivers;
    > - added V4L2 compliance results;
    > - added various comments and rework commit mesages as requested.
    >
    > Media ctl outputs for the testing setups are available below:
    >
    > # sun6i-csi + sun6i-mipi-csi2 + ov5648
    >
    > Media device information
    > ------------------------
    > driver sun6i-csi
    > model Allwinner Video Capture Device
    > serial
    > bus info platform:1cb0000.camera
    > hw revision 0x0
    > driver version 5.10.0
    >
    > Device topology
    > - entity 1: sun6i-csi (2 pads, 1 link)
    > type Node subtype V4L flags 0
    > device node name /dev/video0
    > pad0: Sink
    > pad1: Sink
    > <- "sun6i-mipi-csi2":1 [ENABLED]
    >
    > - entity 6: sun6i-mipi-csi2 (2 pads, 2 links)
    > type V4L2 subdev subtype Unknown flags 0
    > device node name /dev/v4l-subdev0
    > pad0: Sink
    > [fmt:unknown/0x0]
    > <- "ov5648 0-0036":0 [ENABLED,IMMUTABLE]
    > pad1: Source
    > [fmt:unknown/0x0]
    > -> "sun6i-csi":1 [ENABLED]
    >
    > - entity 9: ov5648 0-0036 (1 pad, 1 link)
    > type V4L2 subdev subtype Sensor flags 0
    > device node name /dev/v4l-subdev1
    > pad0: Source
    > [fmt:SBGGR8_1X8/2592x1944@1/15 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
    > -> "sun6i-mipi-csi2":0 [ENABLED,IMMUTABLE]
    >
    > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865
    >
    > Media device information
    > ------------------------
    > driver sun6i-csi
    > model Allwinner Video Capture Device
    > serial
    > bus info platform:1cb0000.camera
    > hw revision 0x0
    > driver version 5.10.0
    >
    > Device topology
    > - entity 1: sun6i-csi (2 pads, 1 link)
    > type Node subtype V4L flags 0
    > device node name /dev/video0
    > pad0: Sink
    > pad1: Sink
    > <- "sun8i-a83t-mipi-csi2":1 [ENABLED]
    >
    > - entity 6: sun8i-a83t-mipi-csi2 (2 pads, 2 links)
    > type V4L2 subdev subtype Unknown flags 0
    > device node name /dev/v4l-subdev0
    > pad0: Sink
    > [fmt:unknown/0x0]
    > <- "ov8865 1-0036":0 [ENABLED,IMMUTABLE]
    > pad1: Source
    > [fmt:unknown/0x0]
    > -> "sun6i-csi":1 [ENABLED]
    >
    > - entity 9: ov8865 1-0036 (1 pad, 1 link)
    > type V4L2 subdev subtype Sensor flags 0
    > device node name /dev/v4l-subdev1
    > pad0: Source
    > [fmt:SBGGR10_1X10/3264x2448@1/30 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
    > -> "sun8i-a83t-mipi-csi2":0 [ENABLED,IMMUTABLE]
    >
    > V4L2 compliance runs are available below:
    >
    > # sun6i-csi + sun6i-mipi-csi2 + ov5648
    >
    > v4l2-compliance SHA: not available, 32 bits
    >
    > Compliance test for sun6i-video device /dev/video0:
    >
    > Driver Info:
    > Driver name : sun6i-video
    > Card type : sun6i-csi
    > Bus info : platform:camera
    > Driver version : 5.10.0
    > Capabilities : 0x84200001
    > Video Capture
    > Streaming
    > Extended Pix Format
    > Device Capabilities
    > Device Caps : 0x04200001
    > Video Capture
    > Streaming
    > Extended Pix Format
    > Media Driver Info:
    > Driver name : sun6i-csi
    > Model : Allwinner Video Capture Device
    > Serial :
    > Bus info : platform:1cb0000.camera
    > Media version : 5.10.0
    > Hardware revision: 0x00000000 (0)
    > Driver version : 5.10.0
    > Interface Info:
    > ID : 0x03000004
    > Type : V4L Video
    > Entity Info:
    > ID : 0x00000001 (1)
    > Name : sun6i-csi
    > Function : V4L2 I/O
    > Pad 0x01000002 : 0: Sink
    > Pad 0x01000003 : 1: Sink
    > Link 0x0200000d: from remote pad 0x1000008 of entity 'sun6i-mipi-csi2': Data, Enabled
    >
    > Required ioctls:
    > test MC information (see 'Media Driver Info' above): OK
    > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
    > test VIDIOC_QUERYCAP: OK
    >
    > Allow for multiple opens:
    > test second /dev/video0 open: OK
    > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
    > test VIDIOC_QUERYCAP: OK
    > test VIDIOC_G/S_PRIORITY: OK
    > test for unlimited opens: OK
    >
    > Debug ioctls:
    > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
    > test VIDIOC_LOG_STATUS: OK
    >
    > Input ioctls:
    > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
    > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
    > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
    > test VIDIOC_ENUMAUDIO: OK (Not Supported)
    > test VIDIOC_G/S/ENUMINPUT: OK
    > test VIDIOC_G/S_AUDIO: OK (Not Supported)
    > Inputs: 1 Audio Inputs: 0 Tuners: 0
    >
    > Output ioctls:
    > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
    > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
    > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
    > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
    > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
    > Outputs: 0 Audio Outputs: 0 Modulators: 0
    >
    > Input/Output configuration ioctls:
    > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
    > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
    > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
    > test VIDIOC_G/S_EDID: OK (Not Supported)
    >
    > Control ioctls (Input 0):
    > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
    > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
    > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
    > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
    > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
    > test VIDIOC_QUERYCTRL: OK
    > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
    > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
    > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
    > warn: v4l2-test-controls.cpp(368): Gain: returned control value 44 not a multiple of step
    > test VIDIOC_G/S_CTRL: OK
    > warn: v4l2-test-controls.cpp(555): Gain: returned control value 44 not a multiple of step
    > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
    > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
    > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
    > Standard Controls: 15 Private Controls: 0
    >
    > Format ioctls (Input 0):
    > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
    > test VIDIOC_G/S_PARM: OK (Not Supported)
    > test VIDIOC_G_FBUF: OK (Not Supported)
    > test VIDIOC_G_FMT: OK
    > test VIDIOC_TRY_FMT: OK
    > test VIDIOC_S_FMT: OK
    > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
    > test Cropping: OK (Not Supported)
    > test Composing: OK (Not Supported)
    > test Scaling: OK
    >
    > Codec ioctls (Input 0):
    > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
    > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
    > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
    >
    > Buffer ioctls (Input 0):
    > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
    > fail: v4l2-test-buffers.cpp(755): q.export_bufs(node, q.g_type())
    > test VIDIOC_EXPBUF: FAIL
    > test Requests: OK (Not Supported)
    >
    > Total for sun6i-video device /dev/video0: 45, Succeeded: 44, Failed: 1, Warnings: 1
    >
    > # sun6i-csi + sun8i-a83t-mipi-csi2 + ov8865
    >
    > v4l2-compliance SHA: not available, 32 bits
    >
    > Compliance test for sun6i-video device /dev/video0:
    >
    > Driver Info:
    > Driver name : sun6i-video
    > Card type : sun6i-csi
    > Bus info : platform:camera
    > Driver version : 5.10.0
    > Capabilities : 0x84200001
    > Video Capture
    > Streaming
    > Extended Pix Format
    > Device Capabilities
    > Device Caps : 0x04200001
    > Video Capture
    > Streaming
    > Extended Pix Format
    > Media Driver Info:
    > Driver name : sun6i-csi
    > Model : Allwinner Video Capture Device
    > Serial :
    > Bus info : platform:1cb0000.camera
    > Media version : 5.10.0
    > Hardware revision: 0x00000000 (0)
    > Driver version : 5.10.0
    > Interface Info:
    > ID : 0x03000004
    > Type : V4L Video
    > Entity Info:
    > ID : 0x00000001 (1)
    > Name : sun6i-csi
    > Function : V4L2 I/O
    > Pad 0x01000002 : 0: Sink
    > Pad 0x01000003 : 1: Sink
    > Link 0x0200000d: from remote pad 0x1000008 of entity 'sun8i-a83t-mipi-csi2': Data, Enabled
    >
    > Required ioctls:
    > test MC information (see 'Media Driver Info' above): OK
    > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
    > test VIDIOC_QUERYCAP: OK
    >
    > Allow for multiple opens:
    > test second /dev/video0 open: OK
    > warn: v4l2-compliance.cpp(633): media bus_info 'platform:1cb0000.camera' differs from V4L2 bus_info 'platform:camera'
    > test VIDIOC_QUERYCAP: OK
    > test VIDIOC_G/S_PRIORITY: OK
    > test for unlimited opens: OK
    >
    > Debug ioctls:
    > test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
    > test VIDIOC_LOG_STATUS: OK
    >
    > Input ioctls:
    > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
    > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
    > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
    > test VIDIOC_ENUMAUDIO: OK (Not Supported)
    > test VIDIOC_G/S/ENUMINPUT: OK
    > test VIDIOC_G/S_AUDIO: OK (Not Supported)
    > Inputs: 1 Audio Inputs: 0 Tuners: 0
    >
    > Output ioctls:
    > test VIDIOC_G/S_MODULATOR: OK (Not Supported)
    > test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
    > test VIDIOC_ENUMAUDOUT: OK (Not Supported)
    > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
    > test VIDIOC_G/S_AUDOUT: OK (Not Supported)
    > Outputs: 0 Audio Outputs: 0 Modulators: 0
    >
    > Input/Output configuration ioctls:
    > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
    > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
    > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
    > test VIDIOC_G/S_EDID: OK (Not Supported)
    >
    > Control ioctls (Input 0):
    > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
    > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
    > warn: v4l2-test-controls.cpp(92): Exposure: (max - min) % step != 0
    > warn: v4l2-test-controls.cpp(92): Gain: (max - min) % step != 0
    > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
    > test VIDIOC_QUERYCTRL: OK
    > test VIDIOC_G/S_CTRL: OK
    > test VIDIOC_G/S/TRY_EXT_CTRLS: OK
    > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
    > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
    > Standard Controls: 11 Private Controls: 0
    >
    > Format ioctls (Input 0):
    > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
    > test VIDIOC_G/S_PARM: OK (Not Supported)
    > test VIDIOC_G_FBUF: OK (Not Supported)
    > test VIDIOC_G_FMT: OK
    > test VIDIOC_TRY_FMT: OK
    > test VIDIOC_S_FMT: OK
    > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
    > test Cropping: OK (Not Supported)
    > test Composing: OK (Not Supported)
    > test Scaling: OK
    >
    > Codec ioctls (Input 0):
    > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
    > test VIDIOC_G_ENC_INDEX: OK (Not Supported)
    > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
    >
    > Buffer ioctls (Input 0):
    > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
    > test VIDIOC_EXPBUF: OK
    > test Requests: OK (Not Supported)
    >
    > Total for sun6i-video device /dev/video0: 45, Succeeded: 45, Failed: 0, Warnings: 6
    >
    > Paul Kocialkowski (16):
    > docs: phy: Add a part about PHY mode and submode
    > phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
    > phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI
    > CSI-2
    > media: sun6i-csi: Stop using the deprecated fwnode endpoint parser
    > media: sun6i-csi: Use common V4L2 format info for storage bpp
    > media: sun6i-csi: Only configure the interface data width for parallel
    > dt-bindings: media: sun6i-a31-csi: Add MIPI CSI-2 input port
    > media: sun6i-csi: Add support for MIPI CSI-2 bridge input
    > dt-bindings: media: Add A31 MIPI CSI-2 bindings documentation
    > media: sunxi: Add support for the A31 MIPI CSI-2 controller
    > ARM: dts: sun8i: v3s: Add nodes for MIPI CSI-2 support
    > MAINTAINERS: Add entry for the Allwinner A31 MIPI CSI-2 bridge
    > dt-bindings: media: Add A83T MIPI CSI-2 bindings documentation
    > media: sunxi: Add support for the A83T MIPI CSI-2 controller
    > ARM: dts: sun8i: a83t: Add MIPI CSI-2 controller node
    > MAINTAINERS: Add entry for the Allwinner A83T MIPI CSI-2 bridge
    >
    > .../media/allwinner,sun6i-a31-csi.yaml | 88 ++-
    > .../media/allwinner,sun6i-a31-mipi-csi2.yaml | 156 ++++
    > .../media/allwinner,sun8i-a83t-mipi-csi2.yaml | 147 ++++
    > Documentation/driver-api/phy/phy.rst | 18 +
    > MAINTAINERS | 16 +
    > arch/arm/boot/dts/sun8i-a83t.dtsi | 26 +
    > arch/arm/boot/dts/sun8i-v3s.dtsi | 68 ++
    > .../platform/rockchip/rkisp1/rkisp1-isp.c | 3 +-
    > drivers/media/platform/sunxi/Kconfig | 2 +
    > drivers/media/platform/sunxi/Makefile | 2 +
    > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 218 ++++--
    > .../platform/sunxi/sun6i-csi/sun6i_csi.h | 65 +-
    > .../platform/sunxi/sun6i-csi/sun6i_video.c | 57 +-
    > .../platform/sunxi/sun6i-csi/sun6i_video.h | 7 +-
    > .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 12 +
    > .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 +
    > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 600 ++++++++++++++++
    > .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 117 +++
    > .../sunxi/sun8i-a83t-mipi-csi2/Kconfig | 11 +
    > .../sunxi/sun8i-a83t-mipi-csi2/Makefile | 4 +
    > .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c | 92 +++
    > .../sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h | 39 +
    > .../sun8i_a83t_mipi_csi2.c | 666 ++++++++++++++++++
    > .../sun8i_a83t_mipi_csi2.h | 197 ++++++
    > drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 164 ++++-
    > include/linux/phy/phy-mipi-dphy.h | 13 +
    > 26 files changed, 2651 insertions(+), 141 deletions(-)
    > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
    > create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun8i-a83t-mipi-csi2.yaml
    > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig
    > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile
    > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c
    > create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h
    > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Kconfig
    > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/Makefile
    > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.c
    > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_dphy.h
    > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
    > create mode 100644 drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h
    >

    \
     
     \ /
      Last update: 2021-05-26 14:01    [W:4.177 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site