lkml.org 
[lkml]   [2021]   [May]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/5] arm64: dts: ti: k3-am64-main: Add SERDES DT node
On 19:59-20210526, Kishon Vijay Abraham I wrote:
> AM64 has one SERDES 10G instance. Add SERDES DT node for it.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 56 ++++++++++++++++++++++++
> 1 file changed, 56 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> index b2bcbf23eefd..a67f10406a8e 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
> @@ -5,6 +5,17 @@
> * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
> */
>
> +#include <dt-bindings/phy/phy-cadence.h>
> +#include <dt-bindings/phy/phy-ti.h>
> +
> +/ {
> + serdes_refclk: clock {
> + #clock-cells = <0>;
> + compatible = "fixed-clock";
> + clock-frequency = <0>;
> + };
> +};
> +
> &cbass_main {
> oc_sram: sram@70000000 {
> compatible = "mmio-sram";
> @@ -18,6 +29,20 @@
> };
> };
>
> + main_conf: syscon@43000000 {
> + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> + reg = <0x0 0x43000000 0x0 0x20000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0x0 0x43000000 0x20000>;
> +
> + serdes_ln_ctrl: mux-controller {
> + compatible = "mmio-mux";

Any idea where the mmio-mux binding is and status?
I'd rather not pick up a new warning against linux-next

> + #mux-control-cells = <1>;
> + mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */
> + };
> + };
> +
> gic500: interrupt-controller@1800000 {
> compatible = "arm,gic-v3";
> #address-cells = <2>;
> @@ -672,4 +697,35 @@
> ti,mbox-num-users = <4>;
> ti,mbox-num-fifos = <16>;
> };
> +
> + serdes_wiz0: wiz@f000000 {
> + compatible = "ti,am64-wiz-10g";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>;
> + clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>;
> + clock-names = "fck", "core_ref_clk", "ext_ref_clk";
> + num-lanes = <1>;
> + #reset-cells = <1>;
> + #clock-cells = <1>;
> + ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
> +
> + assigned-clocks = <&k3_clks 162 1>;
> + assigned-clock-parents = <&k3_clks 162 5>;
> +
> + serdes0: serdes@f000000 {
> + compatible = "ti,j721e-serdes-10g";
> + reg = <0x0f000000 0x00010000>;
> + reg-names = "torrent_phy";
> + resets = <&serdes_wiz0 0>;
> + reset-names = "torrent_reset";
> + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
> + clock-names = "refclk", "phy_en_refclk";
> + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
> + assigned-clock-parents = <&k3_clks 162 1>, <&k3_clks 162 1>, <&k3_clks 162 1>;

Could we line these up to < 100 chars?

> + #address-cells = <1>;
> + #size-cells = <0>;
> + #clock-cells = <1>;
> + };
> + };
> };
> --
> 2.17.1
>

--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D

\
 
 \ /
  Last update: 2021-05-26 20:45    [W:0.078 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site