lkml.org 
[lkml]   [2021]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 12/17] phy: sun4i-usb: Introduce port2 SIDDQ quirk
Hi

On Wed, May 19, 2021 at 11:41:47AM +0100, Andre Przywara wrote:
> At least the Allwinner H616 SoC requires a weird quirk to make most
> USB PHYs work: Only port2 works out of the box, but all other ports
> need some help from this port2 to work correctly: The CLK_BUS_PHY2 and
> RST_USB_PHY2 clock and reset need to be enabled, and the SIDDQ bit in
> the PMU PHY control register needs to be cleared. For this register to
> be accessible, CLK_BUS_ECHI2 needs to be ungated. Don't ask ....
>
> Instead of disguising this as some generic feature, do exactly that
> in our PHY init:
> If the quirk bit is set, and we initialise a PHY other than PHY2, ungate
> this one special clock, and clear the SIDDQ bit. We can pull in the
> other required clocks via the DT.
>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>

What is this SIDDQ bit doing exactly?

I guess we could also expose this using a power-domain if it's relevant?

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2021-05-24 14:00    [W:1.485 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site