Messages in this thread | | | Subject | Re: [PATCH RESEND] ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset | From | Michal Vokáč <> | Date | Mon, 24 May 2021 10:59:14 +0200 |
| |
On 23. 05. 21 5:49, Shawn Guo wrote: > On Wed, May 12, 2021 at 11:55:14AM +0200, Michal Vokáč wrote: >> The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display. >> The display consist of a 128x64 OLED panel and a SSD1305 controller. >> >> The OLED panel resolution is 128x64 but the built-in controller default >> resolution is 132x64. To display properly a segment offset needs to be >> configured. >> >> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> > > Why are you resending? Please state reason when you resend.
I can't tell where but a while ago I read in some documentation that if you do not get any response for aprox. two weeks you can/should resend the patch in case it fell through the cracks. I sent these patches in the middle of April, four weeks ago, and have got no replies since then. So I [RESEND PATCH] these.
I totally understand that you, and all maintainers and reviewers in general, are very busy so it may take a long time to reply.
AFAIK one does not need to state a reason for RESEND PATCH. The word RESEND itself should explain the reason. This is not v2, where I would of course describe what has changed.
Please correct me if my understanding of this part of the submitting process is incorrect.
Thank you, Michal
| |