Messages in this thread | | | Subject | Re: [PATCH] spi: imx: add 16/32 bits per word support for slave mode | From | Tomas Melin <> | Date | Mon, 24 May 2021 11:25:28 +0300 |
| |
Hi,
On 4/8/21 1:33 PM, Clark Wang wrote: > Enable 16/32 bits per word support for spi-imx slave mode. > It only support 8 bits per word in slave mode before. > > Signed-off-by: Clark Wang <xiaoning.wang@nxp.com> > Reviewed-by: Haibo Chen <haibo.chen@nxp.com> > --- > drivers/spi/spi-imx.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c > index 4fe767acaca7..24ba7ab1b05d 100644 > --- a/drivers/spi/spi-imx.c > +++ b/drivers/spi/spi-imx.c > @@ -386,7 +386,12 @@ static void spi_imx_buf_tx_swap(struct spi_imx_data *spi_imx) > > static void mx53_ecspi_rx_slave(struct spi_imx_data *spi_imx) > { > - u32 val = be32_to_cpu(readl(spi_imx->base + MXC_CSPIRXDATA)); > + u32 val = readl(spi_imx->base + MXC_CSPIRXDATA); > + > + if (spi_imx->bits_per_word <= 8) > + val = be32_to_cpu(val); > + else if (spi_imx->bits_per_word <= 16) > + val = (val << 16) | (val >> 16);
Would it be good to use available
spi_imx_buf_rx_u32
spi_imx_buf_rx_u16
spi_imx_buf_rx_u8
helpers here?
thanks,
Tomas
> > if (spi_imx->rx_buf) { > int n_bytes = spi_imx->slave_burst % sizeof(val); > @@ -415,7 +420,11 @@ static void mx53_ecspi_tx_slave(struct spi_imx_data *spi_imx) > if (spi_imx->tx_buf) { > memcpy(((u8 *)&val) + sizeof(val) - n_bytes, > spi_imx->tx_buf, n_bytes); > - val = cpu_to_be32(val); > + if (spi_imx->bits_per_word <= 8) > + val = cpu_to_be32(val); > + else if (spi_imx->bits_per_word <= 16) > + val = (val << 16) | (val >> 16); > + > spi_imx->tx_buf += n_bytes; > } >
| |