lkml.org 
[lkml]   [2021]   [May]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH V4 4/8] arm64: dts: qcom: pm8350c: Add temp-alarm support
On 2021-05-18 17:18, Vinod Koul wrote:
> On 18-05-21, 11:50, satya priya wrote:
>> Add temp-alarm node for PM8350C pmic and also modify gpio
>> node to add gpio ranges and "qcom,spmi-gpio" compatible.
>
> These should be two patches explaining why things are done like that
>

Okay, will split them.

>>
>> Signed-off-by: satya priya <skakit@codeaurora.org>
>> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
>> ---
>> Changes in RESEND V4:
>> - No Changes.
>>
>> arch/arm64/boot/dts/qcom/pm8350c.dtsi | 32
>> +++++++++++++++++++++++++++++++-
>> 1 file changed, 31 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
>> b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
>> index 2b9b75e..e1b75ae 100644
>> --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
>> @@ -13,13 +13,43 @@
>> #address-cells = <1>;
>> #size-cells = <0>;
>>
>> + pm8350c_temp_alarm: temp-alarm@a00 {
>> + compatible = "qcom,spmi-temp-alarm";
>> + reg = <0xa00>;
>> + interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
>> + #thermal-sensor-cells = <0>;
>> + };
>> +
>> pm8350c_gpios: gpio@8800 {
>> - compatible = "qcom,pm8350c-gpio";
>> + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
>
> why is this changed?

As per the Documentation[1], either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
must be added based on whether the device is on an spmi bus or an ssbi
bus respectively.

[1]
https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/pinctrl/qcom%2Cpmic-gpio.txt#L41

>
>> reg = <0x8800>;
>> gpio-controller;
>> + gpio-ranges = <&pm8350c_gpios 0 0 9>;
>> #gpio-cells = <2>;
>> interrupt-controller;
>> #interrupt-cells = <2>;
>> };
>> };
>> };
>> +
>> +&thermal_zones {
>> + pm8350c_thermal: pm8350c-thermal {
>> + polling-delay-passive = <100>;
>> + polling-delay = <0>;
>> + thermal-sensors = <&pm8350c_temp_alarm>;
>> +
>> + trips {
>> + pm8350c_trip0: trip0 {
>> + temperature = <95000>;
>> + hysteresis = <0>;
>> + type = "passive";
>> + };
>> +
>> + pm8350c_crit: pm8350c-crit {
>> + temperature = <115000>;
>> + hysteresis = <0>;
>> + type = "critical";
>> + };
>> + };
>> + };
>> +};
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
>> member
>> of Code Aurora Forum, hosted by The Linux Foundation

\
 
 \ /
  Last update: 2021-05-20 08:26    [W:0.205 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site