[lkml]   [2021]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subject[PATCH v5 00/14] media: mtk-vcodec: support for MT8183 decoder
    This series adds support for the stateless API into mtk-vcodec, by first
    separating the stateful ops into their own source file, and introducing
    a new set of ops suitable for stateless decoding. As such, support for
    stateful decoders should remain completely unaffected.

    This series has been tested with both MT8183 and MT8173. Decoding was
    working for both chips, and in the case of MT8173 no regression has been

    Patches 1-5 fix a few compliance issues with the decoder and encoder, most
    notably by adding support for the START and STOP command for the latter. These
    patches were last in the previous series but have been moved to the beginning so
    they can be applied sooner.

    Patches 6-9 separates the "stateful" part of the driver into its own file and
    add support for the new firmware and pixel format used by MT8183.

    Patches 10-14 add support for H.264 stateless decoding and MT8183.

    Changes since v4:
    * Moved compliance fix patches to the head of the series.
    * Properly capitalize MM21's format description string.
    * Reorganize stateless code as suggested by Hans.
    * Fix compilation errors when DEBUG is defined.
    * Merge double-free fixup patch into the patch that introduced the issue (was
    a separate patch coming right after the one introducing the issue).

    Changes since v3:
    * Stop checking that controls are set for every request.
    * Add V4L2_CID_STATELESS_H264_START_CODE control.
    * Stop mapping OUTPUT buffers and getting the NAL type from them, use the
    nal_ref_idc field instead.
    * Make V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control stateful-only.
    * Set vb2_buffer's field to V4L2_FIELD_NONE in buffer validation hook.

    Changes since v2:
    * Add follow-up patches fixing support for START/STOP commands for the
    encoder, and stateful decoder.

    Alexandre Courbot (8):
    media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
    media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
    media: mtk-vcodec: make flush buffer reusable by encoder
    media: mtk-vcodec: venc: support START and STOP commands
    media: mtk-vcodec: vdec: handle firmware version field
    media: mtk-vcodec: support version 2 of decoder firmware ABI
    media: add Mediatek's MM21 format
    dt-bindings: media: document mediatek,mt8183-vcodec-dec

    Hirokazu Honda (1):
    media: mtk-vcodec: vdec: Support H264 profile control

    Yunfei Dong (5):
    media: mtk-vcodec: vdec: move stateful ops into their own file
    media: mtk-vcodec: vdec: support stateless API
    media: mtk-vcodec: vdec: support stateless H.264 decoding
    media: mtk-vcodec: vdec: add media device if using stateless api
    media: mtk-vcodec: enable MT8183 decoder

    .../bindings/media/mediatek-vcodec.txt | 1 +
    .../media/v4l/pixfmt-reserved.rst | 7 +
    drivers/media/platform/Kconfig | 3 +
    drivers/media/platform/mtk-vcodec/Makefile | 3 +
    .../platform/mtk-vcodec/mtk_vcodec_dec.c | 817 +++---------------
    .../platform/mtk-vcodec/mtk_vcodec_dec.h | 27 +-
    .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 66 +-
    .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 668 ++++++++++++++
    .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 366 ++++++++
    .../platform/mtk-vcodec/mtk_vcodec_drv.h | 58 +-
    .../platform/mtk-vcodec/mtk_vcodec_enc.c | 135 ++-
    .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 4 +
    .../mtk-vcodec/vdec/vdec_h264_req_if.c | 780 +++++++++++++++++
    .../media/platform/mtk-vcodec/vdec_drv_if.c | 3 +
    .../media/platform/mtk-vcodec/vdec_drv_if.h | 1 +
    .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 23 +-
    .../media/platform/mtk-vcodec/vdec_vpu_if.c | 43 +-
    .../media/platform/mtk-vcodec/vdec_vpu_if.h | 5 +
    drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
    include/uapi/linux/videodev2.h | 1 +
    20 files changed, 2290 insertions(+), 722 deletions(-)
    create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
    create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
    create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c


     \ /
      Last update: 2021-05-19 16:32    [W:12.383 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site