Messages in this thread Patch in this message | | | From | Greg Kroah-Hartman <> | Subject | [PATCH 5.11 283/329] usb: xhci: Increase timeout for HC halt | Date | Mon, 17 May 2021 16:03:14 +0200 |
| |
From: Maximilian Luz <luzmaximilian@gmail.com>
commit ca09b1bea63ab83f4cca3a2ae8bc4f597ec28851 upstream.
On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue.
Cc: <stable@vger.kernel.org> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> --- drivers/usb/host/xhci-ext-caps.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -7,8 +7,9 @@ * Author: Sarah Sharp * Some code borrowed from the Linux EHCI driver. */ -/* Up to 16 ms to halt an HC */ -#define XHCI_MAX_HALT_USEC (16*1000) + +/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */ +#define XHCI_MAX_HALT_USEC (32 * 1000) /* HC not running - set to 1 when run/stop bit is cleared. */ #define XHCI_STS_HALT (1<<0)
| |