lkml.org 
[lkml]   [2021]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 07/10] watchdog: keembay: Update the check in keembay_wdt_resume()
Date
> -----Original Message-----
> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
> Sent: Wednesday, May 12, 2021 7:32 PM
> To: Sanil, Shruthi <shruthi.sanil@intel.com>
> Cc: wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-
> kernel@vger.kernel.org; andriy.shevchenko@linux.intel.com;
> kris.pan@linux.intel.com; mgross@linux.intel.com; Thokala, Srikanth
> <srikanth.thokala@intel.com>; Raja Subramanian, Lakshmi Bai
> <lakshmi.bai.raja.subramanian@intel.com>; Sangannavar, Mallikarjunappa
> <mallikarjunappa.sangannavar@intel.com>
> Subject: Re: [PATCH 07/10] watchdog: keembay: Update the check in
> keembay_wdt_resume()
>
> On Wed, May 12, 2021 at 02:17:21PM +0530, shruthi.sanil@intel.com wrote:
> > From: Shruthi Sanil <shruthi.sanil@intel.com>
> >
> > Corrected the typo in the function keembay_wdt_resume, we need to
> > enable the WDT if it is disabled/not active.
> >
> > Fixes: fa0f8d51e90d ("watchdog: Add watchdog driver for Intel Keembay
> > Soc")
> > Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> > Tested-by: Kris Pan <kris.pan@intel.com>
> > Signed-off-by: Shruthi Sanil <shruthi.sanil@intel.com>
> > ---
> > drivers/watchdog/keembay_wdt.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/watchdog/keembay_wdt.c
> > b/drivers/watchdog/keembay_wdt.c index dd192b8dff55..10896415f8c7
> > 100644
> > --- a/drivers/watchdog/keembay_wdt.c
> > +++ b/drivers/watchdog/keembay_wdt.c
> > @@ -260,7 +260,7 @@ static int __maybe_unused
> > keembay_wdt_resume(struct device *dev) {
> > struct keembay_wdt *wdt = dev_get_drvdata(dev);
> >
> > - if (watchdog_active(&wdt->wdd))
> > + if (!watchdog_active(&wdt->wdd))
>
> Have you tested this ? "watchdog_active" refers to the watchdog core state.
> Your code now keeps the watchdog stopped after resume if it was running
> before, and starts it if it wasn't. Please run through a suspend/resume cycle
> with watchdog disabled and see what happens.
>
> Guenter

I had understood it wrongly. I was assuming that watchdog_active refers to the actual state of the HW. Hence I made that change.
But since watchdog_active refers to the state of the core, the change that I have done is incorrect. Hence I'll drop this patch.

Thanks
Shruthi

>
> > return keembay_wdt_start(&wdt->wdd);
> >
> > return 0;
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2021-05-13 07:34    [W:0.136 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site