lkml.org 
[lkml]   [2021]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/14] usb: dwc2: Fix Partial Power down issues.
On Thu, Apr 08, 2021 at 05:57:57AM +0000, Artur Petrosyan wrote:
> Hi Greg,
>
> On 4/7/2021 14:00, Artur Petrosyan wrote:
> > This patch set fixes and improves the Partial Power Down mode for
> > dwc2 core.
> > It adds support for the following cases
> > 1. Entering and exiting partial power down when a port is
> > suspended, resumed, port reset is asserted.
> > 2. Exiting the partial power down mode before removing driver.
> > 3. Exiting partial power down in wakeup detected interrupt handler.
> > 4. Exiting from partial power down mode when connector ID.
> > status changes to "connId B
> >
> > It updates and fixes the implementation of dwc2 entering and
> > exiting partial power down mode when the system (PC) is suspended.
> >
> > The patch set also improves the implementation of function handlers
> > for entering and exiting host or device partial power down.
> >
> > NOTE: This is the second patch set in the power saving mode fixes
> > series.
> > This patch set is part of multiple series and is continuation
> > of the "usb: dwc2: Fix and improve power saving modes" patch set.
> > (Patch set link: https://marc.info/?l=linux-usb&m=160379622403975&w=2).
> > The patches that were included in the "usb: dwc2:
> > Fix and improve power saving modes" which was submitted
> > earlier was too large and needed to be split up into
> > smaller patch sets.
> >
> >
> > Artur Petrosyan (14):
> > usb: dwc2: Add device partial power down functions
> > usb: dwc2: Add host partial power down functions
> > usb: dwc2: Update enter and exit partial power down functions
> > usb: dwc2: Add partial power down exit flow in wakeup intr.
> > usb: dwc2: Update port suspend/resume function definitions.
> > usb: dwc2: Add enter partial power down when port is suspended
> > usb: dwc2: Add exit partial power down when port is resumed
> > usb: dwc2: Add exit partial power down when port reset is asserted
> > usb: dwc2: Add part. power down exit from
> > dwc2_conn_id_status_change().
> > usb: dwc2: Allow exit partial power down in urb enqueue
> > usb: dwc2: Fix session request interrupt handler
> > usb: dwc2: Update partial power down entering by system suspend
> > usb: dwc2: Fix partial power down exiting by system resume
> > usb: dwc2: Add exit partial power down before removing driver
> >
> > drivers/usb/dwc2/core.c | 113 ++-------
> > drivers/usb/dwc2/core.h | 27 ++-
> > drivers/usb/dwc2/core_intr.c | 46 ++--
> > drivers/usb/dwc2/gadget.c | 148 ++++++++++-
> > drivers/usb/dwc2/hcd.c | 458 +++++++++++++++++++++++++----------
> > drivers/usb/dwc2/hw.h | 1 +
> > drivers/usb/dwc2/platform.c | 11 +-
> > 7 files changed, 558 insertions(+), 246 deletions(-)
> >
> >
> > base-commit: e9fcb07704fcef6fa6d0333fd2b3a62442eaf45b
> >
> I have submitted this patch set yesterday. It contains 14 patches. But
> only 2 of those patches were received by LKML only the cover letter and
> the 13th patch.
> (https://lore.kernel.org/linux-usb/cover.1617782102.git.Arthur.Petrosyan@synopsys.com/T/#t)
>
> I checked here at Synopsys, Minas did receive all the patches as his
> email is in To list. Could this be an issue of vger.kernel.org mailing
> server?
>
> Because I checked every local possibility that could result to such
> behavior. The patch 13 which was received by LKML has the similar
> content as the other patches.
>
> The mailing tool that was used is ssmtp, checked all the configurations
> everything is fine.
>
> Could you please suggest what should I do in this situation?

Odd, I got them here, but lore seems to not have them :(

Can you just resend them as a "v2" series so we know which to review and
let's see if that works better...

thanks,

greg k-h

\
 
 \ /
  Last update: 2021-04-08 08:14    [W:0.233 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site