lkml.org 
[lkml]   [2021]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] ARM: at91: debug: add sama7g5 low level debug uart
Date
Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the
ROM bootloader uses.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
arch/arm/Kconfig.debug | 10 ++++++++++
1 file changed, 10 insertions(+)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9e0b5e7f12af..7598624ce6dd 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -191,6 +191,14 @@ choice
their output to the USART1 port on SAMV7 based
machines.

+ config DEBUG_AT91_SAMA7G5_FLEXCOM3
+ bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
+ select DEBUG_AT91_UART
+ depends on SOC_SAMA7G5
+ help
+ Say Y here if you want kernel low-level debugging support
+ on the FLEXCOM3 port of SAMA7G5.
+
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
depends on ARCH_BCM2835 && ARCH_MULTI_V6
@@ -1657,6 +1665,7 @@ config DEBUG_UART_PHYS
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if DEBUG_SPEAR13XX
+ default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
default 0xe4007000 if DEBUG_HIP04_UART
default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
@@ -1718,6 +1727,7 @@ config DEBUG_UART_VIRT
default 0xc8821000 if DEBUG_RV1108_UART1
default 0xc8912000 if DEBUG_RV1108_UART0
default 0xe0010fe0 if ARCH_RPC
+ default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf0100000 if DEBUG_DIGICOLOR_UA0
default 0xf01fb000 if DEBUG_NOMADIK_UART
--
2.25.1
\
 
 \ /
  Last update: 2021-04-07 19:01    [W:0.162 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site