lkml.org 
[lkml]   [2021]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V2 3/5] arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350
On 2021-04-03 00:15, Matthias Kaehlcke wrote:
> On Thu, Apr 01, 2021 at 02:43:14PM +0530, satya priya wrote:
>> subject: arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350
>
> same nit as for 1/5: maybe just 'arm64: dts: qcom: Add pml7350
> support/.dtsi'
> or similar since this adds the initial .dtsi for the pmk8350?
>
>> Add PON, GPIO, RTC and other PMIC infra modules support for pmk8350.
>

I see that pmk8350 DT file is already added in linux-next.
Only GPIO node has been added, will add remaining nodes and change
commit text accordingly.

> nit: also mention that it adds the pmk8350 .dtsi in the first place.
>
>> Signed-off-by: satya priya <skakit@codeaurora.org>
>> ---
>> arch/arm64/boot/dts/qcom/pmk8350.dtsi | 100
>> ++++++++++++++++++++++++++++++++++
>> 1 file changed, 100 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/pmk8350.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
>> b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
>> new file mode 100644
>> index 0000000..13631f2
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
>> @@ -0,0 +1,100 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +// Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> +
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/input/linux-event-codes.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/spmi/spmi.h>
>> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
>> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
>> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
>> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
>> +
>> +&spmi_bus {
>> + pmk8350: pmic@0 {
>> + compatible = "qcom,pmk8350", "qcom,spmi-pmic";
>
> Please provide a link to the binding if it has been sent.
>
>> + reg = <0x0 SPMI_USID>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + pmk8350_pon: pon@1300 {
>> + compatible = "qcom,pm8998-pon";
>> + reg = <0x1300>;
>> +
>> + pwrkey {
>> + compatible = "qcom,pmk8350-pwrkey";
>> + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
>> + linux,code = <KEY_POWER>;
>> + };
>> +
>> + resin {
>> + compatible = "qcom,pmk8350-resin";
>> + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
>> + linux,code = <KEY_VOLUMEDOWN>;
>> + };
>
> Is the usage of this keys really universal across different boards?
>

Yes, It is universal across different boards.

> At least for the volume down key for most PMICs the config is in the
> board file, which seems to make more sense.
>
>> + };
>> +
>> + pmk8350_vadc: adc@3100 {
>> + compatible = "qcom,spmi-adc7";
>> + reg = <0x3100>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "eoc-int-en-set";
>> + #io-channel-cells = <1>;
>> + io-channel-ranges;
>> +
>> + pmk8350_die_temp {
>> + reg = <PMK8350_ADC7_DIE_TEMP>;
>> + label = "pmk8350_die_temp";
>> + qcom,pre-scaling = <1 1>;
>> + };
>> +
>> + pm8350_die_temp {
>> + reg = <PM8350_ADC7_DIE_TEMP>;
>> + label = "pm8350_die_temp";
>> + qcom,pre-scaling = <1 1>;
>> + };
>
> nit: I think this should be 'alphabetical' order, so 'pm8350_die_temp'
> should
> be before 'pmk8350_die_temp'.
>

Ok.

>> +
>> + pmr735a_die_temp {
>> + reg = <PMR735A_ADC7_DIE_TEMP>;
>> + label = "pmr735a_die_temp";
>> + qcom,pre-scaling = <1 1>;
>> + };
>> +
>> + pmr735b_die_temp {
>> + reg = <PMR735B_ADC7_DIE_TEMP>;
>> + label = "pmr735b_die_temp";
>> + qcom,pre-scaling = <1 1>;
>> + };
>
> Is it guaranteed that a board with the pmk8350 will always have the
> other 3 PMICs?
>

No.
Ok, will move this to idp board dts file.

>> + };
>> +
>> + pmk8350_adc_tm: adc-tm@3400 {
>> + compatible = "qcom,adc-tm7";
>> + reg = <0x3400>;
>> + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
>> + interrupt-names = "threshold";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #thermal-sensor-cells = <1>;
>> + status = "disabled";
>> + };
>> +
>> + pmk8350_gpios: gpios@b000 {
>> + compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
>> + reg = <0xb000>;
>> + gpio-controller;
>> + gpio-ranges = <&pmk8350_gpios 0 0 4>;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + pmk8350_rtc: rtc@6100 {
>
> nit: nodes should be ordered by address, hence 'rtc@6100' should be
> before
> 'gpios@b000'.
>

Ok.

>> + compatible = "qcom,pmk8350-rtc";
>> + reg = <0x6100>, <0x6200>;
>> + reg-names = "rtc", "alarm";
>> + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
>> + };
>> + };
>> +};

\
 
 \ /
  Last update: 2021-04-07 17:30    [W:0.048 / U:1.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site