lkml.org 
[lkml]   [2021]   [Apr]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: ti: k3-am65: Add support for UHS-I modes in MMCSD1 subsystem
From
Date
On 07.04.21 16:59, Nishanth Menon wrote:
> On 16:13-20210407, Aswath Govindraju wrote:
>> UHS-I speed modes are supported in AM65 S.R. 2.0 SoC[1].
>>
>> Add support by removing the no-1-8-v tag and including the voltage
>> regulator device tree nodes for power cycling.
>>
>> [1] - https://www.ti.com/lit/ug/spruid7e/spruid7e.pdf, section 12.3.6.1.1
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
>
>> ---
>>
>> test logs:
>> https://pastebin.ubuntu.com/p/vpYbY9QWh8/
>>
> Thanks, but I dont plan on queuing this for 5.13-rc1 (my PR is already
> out). but it does trigger an interesting discussion..
>
>> arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 1 -
>> .../arm64/boot/dts/ti/k3-am654-base-board.dts | 33 +++++++++++++++++++
>> 2 files changed, 33 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> index cb340d1b401f..632f32fce4a1 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
>> @@ -301,7 +301,6 @@
>> ti,otap-del-sel = <0x2>;
>> ti,trm-icp = <0x8>;
>> dma-coherent;
>> - no-1-8-v;
>> };
>>
>
> Jan - this will break your IOT SR1.0 boards, no? with all the SR1.0,
> 2.0, 2.1 coming along, the plan for TI was to support older revs via
> overlays hoping that older boards will eventually get replaced or die
> out of lack of use.. but you do have production on 1.0 -> so would you
> rather handle this in overlay OR IOT boards dts introduce no-1-8-v
> property?

I'm fine with pulling anything needed into our board-specific DTs. Those
pending are for SR1.0 boards only. SR2 will come later and have their
own DTs.

Didn't follow the thread: Where is this patch located wrt my IOT2050
series? Does it come first first, and we would have to rebase? Or would
this change rather have to move the flag to k3-am65-iot2050-common.dtsi?

Thanks a lot for having an eye on these subtle dependencies!

Jan

--
Siemens AG, T RDA IOT
Corporate Competence Center Embedded Linux

\
 
 \ /
  Last update: 2021-04-07 17:21    [W:0.052 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site