lkml.org 
[lkml]   [2021]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 11/16] dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
From
Date


On 4/6/21 6:09 PM, Pratyush Yadav wrote:
> On 04/04/21 04:24PM, Péter Ujfalusi wrote:
>> Hi Pratyush,
>>
>> On 3/30/21 8:33 PM, Pratyush Yadav wrote:
>>> The CSI2RX subsystem uses PSI-L DMA to transfer frames to memory. It can
>>> have up to 32 threads but the current driver only supports using one. So
>>> add an entry for that one thread.
>>
>> If you are absolutely sure that the other threads are not going to be
>> used, then:
>
> The opposite in fact. I do expect other threads to be used in the
> future. But the current driver can only use one so I figured it is
> better to add just the thread that is currently needed and then I can
> always add the rest later.
>
> Why does this have to be a one-and-done deal? Is there anything wrong
> with adding the other threads when the driver can actually use them?

You can skip CCing DMAengine (and me ;) ). Less subsystems is the better
when sending patches...

>
>> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
>>
>> but I would consider adding the other threads if there is a chance that
>> the cs2rx will need to support it in the future.
>>
>>> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
>>> ---
>>> drivers/dma/ti/k3-psil-j721e.c | 10 ++++++++++
>>> 1 file changed, 10 insertions(+)
>>>
>>> diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
>>> index 7580870ed746..19ffa31e6dc6 100644
>>> --- a/drivers/dma/ti/k3-psil-j721e.c
>>> +++ b/drivers/dma/ti/k3-psil-j721e.c
>>> @@ -58,6 +58,14 @@
>>> }, \
>>> }
>>>
>>> +#define PSIL_CSI2RX(x) \
>>> + { \
>>> + .thread_id = x, \
>>> + .ep_config = { \
>>> + .ep_type = PSIL_EP_NATIVE, \
>>> + }, \
>>> + }
>>> +
>>> /* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
>>> static struct psil_ep j721e_src_ep_map[] = {
>>> /* SA2UL */
>>> @@ -138,6 +146,8 @@ static struct psil_ep j721e_src_ep_map[] = {
>>> PSIL_PDMA_XY_PKT(0x4707),
>>> PSIL_PDMA_XY_PKT(0x4708),
>>> PSIL_PDMA_XY_PKT(0x4709),
>>> + /* CSI2RX */
>>> + PSIL_CSI2RX(0x4940),
>>> /* CPSW9 */
>>> PSIL_ETHERNET(0x4a00),
>>> /* CPSW0 */
>>>
>>
>> --
>> Péter
>

--
Péter

\
 
 \ /
  Last update: 2021-04-06 17:36    [W:0.092 / U:2.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site