lkml.org 
[lkml]   [2021]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: dts: uniphier: Change phy-mode to RGMII-ID to enable delay pins for RTL8211E
Gentle Ping.
Are there any comments about these two patches?

Thank you,

On Tue, 9 Mar 2021 09:37:15 +0900
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> wrote:

> After applying the commit bbc4d71d6354
> ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the configuration
> register for TXDLY and RXDLY is set correctly.
>
> Although PXs2 boards have RTL8211E for gigabit network PHY, it turrned out
> that the phy-mode should be RGMII-ID mode. This changes 'phy-mode' property
> to 'rgmii-id' as default.
>
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
> ---
> arch/arm/boot/dts/uniphier-pxs2.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> index 4d9f69a..5ba831e 100644
> --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
> +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> @@ -583,7 +583,7 @@
> clocks = <&sys_clk 6>;
> reset-names = "ether";
> resets = <&sys_rst 6>;
> - phy-mode = "rgmii";
> + phy-mode = "rgmii-id";
> local-mac-address = [00 00 00 00 00 00];
> socionext,syscon-phy-mode = <&soc_glue 0>;
>
> --
> 2.7.4

---
Best Regards,
Kunihiko Hayashi

\
 
 \ /
  Last update: 2021-04-06 08:53    [W:0.056 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site