lkml.org 
[lkml]   [2021]   [Apr]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] fpga: dfl: Add DFL bus driver for Altera SPI Master
Hi Matthew,

On Mon, Apr 05, 2021 at 04:53:00PM -0700, matthew.gerlach@linux.intel.com wrote:
> From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
>
> This patch adds DFL bus driver for the Altera SPI Master
> controller. The SPI master is connected to an Intel SPI Slave to
> Avalon Master Bridge, inside an Intel MAX10 BMC Chip.
>
> Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
> ---
> drivers/fpga/Kconfig | 9 ++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/dfl-spi-altera.c | 221 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 231 insertions(+)
> create mode 100644 drivers/fpga/dfl-spi-altera.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index d591dd9..0a86994 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -210,6 +210,15 @@ config FPGA_DFL_NIOS_INTEL_PAC_N3000
> the card. It also instantiates the SPI master (spi-altera) for
> the card's BMC (Board Management Controller).
>
> +config FPGA_DFL_SPI_ALTERA
> + tristate "FPGA DFL Altera SPI Master Driver"
> + depends on FPGA_DFL
> + select REGMAP
> + help
> + This is a DFL bus driver for the Altera SPI master controller.
> + The SPI master is connected to a SPI slave to Avalon Master
> + bridge in a Intel MAX BMC.
> +
> config FPGA_DFL_PCI
> tristate "FPGA DFL PCIe Device Driver"
> depends on PCI && FPGA_DFL
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 18dc9885..58a42ad 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -45,6 +45,7 @@ dfl-afu-objs := dfl-afu-main.o dfl-afu-region.o dfl-afu-dma-region.o
> dfl-afu-objs += dfl-afu-error.o
>
> obj-$(CONFIG_FPGA_DFL_NIOS_INTEL_PAC_N3000) += dfl-n3000-nios.o
> +obj-$(CONFIG_FPGA_DFL_SPI_ALTERA) += dfl-spi-altera.o
>
> # Drivers for FPGAs which implement DFL
> obj-$(CONFIG_FPGA_DFL_PCI) += dfl-pci.o
> diff --git a/drivers/fpga/dfl-spi-altera.c b/drivers/fpga/dfl-spi-altera.c
> new file mode 100644
> index 0000000..9bec25fd
> --- /dev/null
> +++ b/drivers/fpga/dfl-spi-altera.c
> @@ -0,0 +1,221 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DFL bus driver for Altera SPI Master
> + *
> + * Copyright (C) 2020 Intel Corporation, Inc.
> + *
> + * Authors:
> + * Matthew Gerlach <matthew.gerlach@linux.intel.com>
> + */
> +
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/stddef.h>
> +#include <linux/errno.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/bitfield.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +#include <linux/spi/altera.h>
> +#include <linux/dfl.h>
> +
> +struct dfl_altera_spi {
> + void __iomem *base;
> + struct regmap *regmap;
> + struct device *dev;
> + struct platform_device *altr_spi;
> +};
> +
> +#define SPI_CORE_PARAMETER 0x8
> +#define SHIFT_MODE BIT_ULL(1)
> +#define SHIFT_MODE_MSB 0
> +#define SHIFT_MODE_LSB 1
> +#define DATA_WIDTH GENMASK_ULL(7, 2)
> +#define NUM_CHIPSELECT GENMASK_ULL(13, 8)
> +#define CLK_POLARITY BIT_ULL(14)
> +#define CLK_PHASE BIT_ULL(15)
> +#define PERIPHERAL_ID GENMASK_ULL(47, 32)
> +#define SPI_CLK GENMASK_ULL(31, 22)
> +#define SPI_INDIRECT_ACC_OFST 0x10
> +
> +#define INDIRECT_ADDR (SPI_INDIRECT_ACC_OFST+0x0)
> +#define INDIRECT_WR BIT_ULL(8)
> +#define INDIRECT_RD BIT_ULL(9)
> +#define INDIRECT_RD_DATA (SPI_INDIRECT_ACC_OFST+0x8)
> +#define INDIRECT_DATA_MASK GENMASK_ULL(31, 0)
> +#define INDIRECT_DEBUG BIT_ULL(32)
> +#define INDIRECT_WR_DATA (SPI_INDIRECT_ACC_OFST+0x10)
> +#define INDIRECT_TIMEOUT 10000
> +
> +static int indirect_bus_reg_read(void *context, unsigned int reg,
> + unsigned int *val)
> +{
> + struct dfl_altera_spi *aspi = context;
> + void __iomem *base = aspi->base;
> + int loops;
> + u64 v;
> +
> + writeq((reg >> 2) | INDIRECT_RD, base + INDIRECT_ADDR);
> +
> + loops = 0;
> + while ((readq(base + INDIRECT_ADDR) & INDIRECT_RD) &&
> + (loops++ < INDIRECT_TIMEOUT))
> + cpu_relax();
> +
> + if (loops >= INDIRECT_TIMEOUT) {
> + pr_err("%s timed out %d\n", __func__, loops);
> + return -ETIME;
> + }
> +
> + v = readq(base + INDIRECT_RD_DATA);
> +
> + *val = v & INDIRECT_DATA_MASK;
> +
> + return 0;
> +}
> +
> +static int indirect_bus_reg_write(void *context, unsigned int reg,
> + unsigned int val)
> +{
> + struct dfl_altera_spi *aspi = context;
> + void __iomem *base = aspi->base;
> + int loops;
> +
> + writeq(val, base + INDIRECT_WR_DATA);
> + writeq((reg >> 2) | INDIRECT_WR, base + INDIRECT_ADDR);
> +
> + loops = 0;
> + while ((readq(base + INDIRECT_ADDR) & INDIRECT_WR) &&
> + (loops++ < INDIRECT_TIMEOUT))
> + cpu_relax();
> +
> + if (loops >= INDIRECT_TIMEOUT) {
> + pr_err("%s timed out %d\n", __func__, loops);
> + return -ETIME;
> + }
> + return 0;
> +}
> +
> +static const struct regmap_config indirect_regbus_cfg = {
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .fast_io = true,
> +
> + .reg_write = indirect_bus_reg_write,
> + .reg_read = indirect_bus_reg_read,
> +};
> +
> +static struct spi_board_info m10_bmc_info = {
> + .modalias = "m10-d5005",
> + .max_speed_hz = 12500000,
> + .bus_num = 0,
> + .chip_select = 0,
> +};
> +
> +static struct platform_device *create_cntrl(struct device *dev,
> + void __iomem *base,
> + struct spi_board_info *m10_info)
> +{
> + struct altera_spi_platform_data pdata;
> + struct platform_device_info pdevinfo;
> + u64 v;
> +
> + v = readq(base + SPI_CORE_PARAMETER);
> +
> + memset(&pdata, 0, sizeof(pdata));
> + pdata.mode_bits = SPI_CS_HIGH;
> + if (FIELD_GET(CLK_POLARITY, v))
> + pdata.mode_bits |= SPI_CPOL;
> + if (FIELD_GET(CLK_PHASE, v))
> + pdata.mode_bits |= SPI_CPHA;
> +
> + pdata.num_chipselect = FIELD_GET(NUM_CHIPSELECT, v);
> + pdata.bits_per_word_mask =
> + SPI_BPW_RANGE_MASK(1, FIELD_GET(DATA_WIDTH, v));
> +
> + pdata.num_devices = 1;
> + pdata.devices = m10_info;
> +
> + dev_dbg(dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
> + pdata.num_chipselect, pdata.bits_per_word_mask,
> + pdata.mode_bits);
> +
> + memset(&pdevinfo, 0, sizeof(pdevinfo));
> +
> + pdevinfo.name = "subdev_spi_altera";
> + pdevinfo.id = PLATFORM_DEVID_AUTO;
> + pdevinfo.parent = dev;
> + pdevinfo.data = &pdata;
> + pdevinfo.size_data = sizeof(pdata);
> +
> + return platform_device_register_full(&pdevinfo);

Should this be a SPI driver? I think looking at the UIO case we had
decided against this pattern?

> +}
> +static int dfl_spi_altera_probe(struct dfl_device *dfl_dev)
> +{
> + struct device *dev = &dfl_dev->dev;
> + struct dfl_altera_spi *aspi;
> +
> + aspi = devm_kzalloc(dev, sizeof(*aspi), GFP_KERNEL);
> +
> + if (!aspi)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, aspi);
> +
> + aspi->dev = dev;
> +
> + aspi->base = devm_ioremap_resource(dev, &dfl_dev->mmio_res);
> +
> + if (IS_ERR(aspi->base)) {
> + dev_err(dev, "%s get mem resource fail!\n", __func__);
> + return PTR_ERR(aspi->base);
> + }
> +
> + aspi->regmap = devm_regmap_init(dev, NULL, aspi, &indirect_regbus_cfg);
> + if (IS_ERR(aspi->regmap))
> + return PTR_ERR(aspi->regmap);
> +
> + aspi->altr_spi = create_cntrl(dev, aspi->base, &m10_bmc_info);
> +
> + if (IS_ERR(aspi->altr_spi)) {
> + dev_err(dev, "%s failed to create spi platform driver\n",
> + __func__);
> + return PTR_ERR(aspi->base);
> + }
> +
> + return 0;
> +}
> +
> +static void dfl_spi_altera_remove(struct dfl_device *dfl_dev)
> +{
> + struct dfl_altera_spi *aspi = dev_get_drvdata(&dfl_dev->dev);
> +
> + platform_device_unregister(aspi->altr_spi);
> +}
> +
> +#define FME_FEATURE_ID_MAX10_SPI 0xe
> +
> +static const struct dfl_device_id dfl_spi_altera_ids[] = {
> + { FME_ID, FME_FEATURE_ID_MAX10_SPI },
> + { }
> +};

Maybe you can extend the Altera SPI driver with this part?
> +
> +static struct dfl_driver dfl_spi_altera_driver = {
> + .drv = {
> + .name = "dfl-spi-altera",
> + },
> + .id_table = dfl_spi_altera_ids,
> + .probe = dfl_spi_altera_probe,
> + .remove = dfl_spi_altera_remove,
> +};
> +
> +module_dfl_driver(dfl_spi_altera_driver);
> +
> +MODULE_DEVICE_TABLE(dfl, dfl_spi_altera_ids);
> +MODULE_DESCRIPTION("DFL spi altera driver");
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL v2");
> --
> 1.8.3.1
>

- Moritz

\
 
 \ /
  Last update: 2021-04-06 02:46    [W:0.106 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site