lkml.org 
[lkml]   [2021]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] arm64: dts: allwinner: h6: Wrap DWC3 and PHY in glue layer
Date
The USB3 IP in the H6 is organized such that the reset line affects both
the DWC3 core and the PHY. To model that, following the example of
several other platforms, wrap those nodes in a glue layer node.

The inner nodes no longer need to be disabled, since the glue layer is
disabled by default to keep it in reset.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../dts/allwinner/sun50i-h6-beelink-gs1.dts | 6 +-
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 6 +-
.../dts/allwinner/sun50i-h6-tanix-tx6.dts | 6 +-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 60 ++++++++++---------
4 files changed, 36 insertions(+), 42 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index b5808047d6e4..5f6292db808c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -86,10 +86,6 @@ &de {
status = "okay";
};

-&dwc3 {
- status = "okay";
-};
-
&ehci0 {
status = "okay";
};
@@ -309,6 +305,6 @@ &usb2phy {
status = "okay";
};

-&usb3phy {
+&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 7e83f6146f8a..ae3c24584f65 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -101,10 +101,6 @@ &de {
status = "okay";
};

-&dwc3 {
- status = "okay";
-};
-
&ehci0 {
status = "okay";
};
@@ -340,6 +336,6 @@ &usb2phy {
status = "okay";
};

-&usb3phy {
+&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index be81330db14f..8cb06df231ab 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -55,10 +55,6 @@ &de {
status = "okay";
};

-&dwc3 {
- status = "okay";
-};
-
&ehci0 {
status = "okay";
};
@@ -119,6 +115,6 @@ &usb2phy {
status = "okay";
};

-&usb3phy {
+&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index af8b7d0ef750..b4ce5eff2822 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -700,36 +700,42 @@ ohci0: usb@5101400 {
status = "disabled";
};

- dwc3: usb@5200000 {
- compatible = "snps,dwc3";
- reg = <0x05200000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&ccu CLK_BUS_XHCI>,
- <&ccu CLK_BUS_XHCI>,
- <&rtc 0>;
- clock-names = "ref", "bus_early", "suspend";
+ usb3: usb@5200000 {
+ compatible = "allwinner,sun50i-h6-dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
resets = <&ccu RST_BUS_XHCI>;
- /*
- * The datasheet of the chip doesn't declare the
- * peripheral function, and there's no boards known
- * to have a USB Type-B port routed to the port.
- * In addition, no one has tested the peripheral
- * function yet.
- * So set the dr_mode to "host" in the DTSI file.
- */
- dr_mode = "host";
- phys = <&usb3phy>;
- phy-names = "usb3-phy";
status = "disabled";
- };

- usb3phy: phy@5210000 {
- compatible = "allwinner,sun50i-h6-usb3-phy";
- reg = <0x5210000 0x10000>;
- clocks = <&ccu CLK_USB_PHY1>;
- resets = <&ccu RST_USB_PHY1>;
- #phy-cells = <0>;
- status = "disabled";
+ dwc3: usb@5200000 {
+ compatible = "snps,dwc3";
+ reg = <0x05200000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_XHCI>,
+ <&ccu CLK_BUS_XHCI>,
+ <&rtc 0>;
+ clock-names = "ref", "bus_early", "suspend";
+ /*
+ * The datasheet of the chip doesn't declare the
+ * peripheral function, and there's no boards known
+ * to have a USB Type-B port routed to the port.
+ * In addition, no one has tested the peripheral
+ * function yet.
+ * So set the dr_mode to "host" in the DTSI file.
+ */
+ dr_mode = "host";
+ phys = <&usb3phy>;
+ phy-names = "usb3-phy";
+ };
+
+ usb3phy: phy@5210000 {
+ compatible = "allwinner,sun50i-h6-usb3-phy";
+ reg = <0x5210000 0x10000>;
+ clocks = <&ccu CLK_USB_PHY1>;
+ resets = <&ccu RST_USB_PHY1>;
+ #phy-cells = <0>;
+ };
};

ehci3: usb@5311000 {
--
2.26.3
\
 
 \ /
  Last update: 2021-04-30 05:20    [W:0.074 / U:2.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site