lkml.org 
[lkml]   [2021]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH v4] Bluetooth: Add ncmd=0 recovery handling
From
During command status or command complete event, the controller may set
ncmd=0 indicating that it is not accepting any more commands. In such a
case, host holds off sending any more commands to the controller. If the
controller doesn't recover from such condition, host will wait forever,
until the user decides that the Bluetooth is broken and may power cycles
the Bluetooth.

This patch triggers the hardware error to reset the controller and
driver when it gets into such state as there is no other wat out.

Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
---

Changes in v4:
- Update comment in hci_ncmd_timeout
- Add a new inline function to handle cmd_cnt and timers

Changes in v3:
- Restructure ncmd_timer scheduling in hci_event.c
- Cancel delayed work in hci_dev_do_close
- Do not inject hw error during HCI_INIT
- Update comment, add log message while injecting hw error

Changes in v2:
- Emit the hardware error when ncmd=0 occurs

include/net/bluetooth/hci.h | 1 +
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_core.c | 22 ++++++++++++++++++++++
net/bluetooth/hci_event.c | 29 +++++++++++++++++++----------
4 files changed, 43 insertions(+), 10 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index ea4ae551c426..c4b0650fb9ae 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -339,6 +339,7 @@ enum {
#define HCI_PAIRING_TIMEOUT msecs_to_jiffies(60000) /* 60 seconds */
#define HCI_INIT_TIMEOUT msecs_to_jiffies(10000) /* 10 seconds */
#define HCI_CMD_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
+#define HCI_NCMD_TIMEOUT msecs_to_jiffies(4000) /* 4 seconds */
#define HCI_ACL_TX_TIMEOUT msecs_to_jiffies(45000) /* 45 seconds */
#define HCI_AUTO_OFF_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
#define HCI_POWER_OFF_TIMEOUT msecs_to_jiffies(5000) /* 5 seconds */
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index ebdd4afe30d2..f14692b39fd5 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -470,6 +470,7 @@ struct hci_dev {
struct delayed_work service_cache;

struct delayed_work cmd_timer;
+ struct delayed_work ncmd_timer;

struct work_struct rx_work;
struct work_struct cmd_work;
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index b0d9c36acc03..e8b492ffb207 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -1723,6 +1723,7 @@ int hci_dev_do_close(struct hci_dev *hdev)
}

cancel_delayed_work(&hdev->power_off);
+ cancel_delayed_work(&hdev->ncmd_timer);

hci_request_cancel_all(hdev);
hci_req_sync_lock(hdev);
@@ -2769,6 +2770,24 @@ static void hci_cmd_timeout(struct work_struct *work)
queue_work(hdev->workqueue, &hdev->cmd_work);
}

+/* HCI ncmd timer function */
+static void hci_ncmd_timeout(struct work_struct *work)
+{
+ struct hci_dev *hdev = container_of(work, struct hci_dev,
+ ncmd_timer.work);
+
+ bt_dev_err(hdev, "Controller not accepting commands anymore: ncmd = 0");
+
+ /* During HCI_INIT phase no events can be injected if the ncmd timer
+ * triggers since the procedure has its own timeout handling.
+ */
+ if (test_bit(HCI_INIT, &hdev->flags))
+ return;
+
+ /* This is an irrecoverable state, inject hardware error event */
+ hci_reset_dev(hdev);
+}
+
struct oob_data *hci_find_remote_oob_data(struct hci_dev *hdev,
bdaddr_t *bdaddr, u8 bdaddr_type)
{
@@ -3831,6 +3850,7 @@ struct hci_dev *hci_alloc_dev(void)
init_waitqueue_head(&hdev->suspend_wait_q);

INIT_DELAYED_WORK(&hdev->cmd_timer, hci_cmd_timeout);
+ INIT_DELAYED_WORK(&hdev->ncmd_timer, hci_ncmd_timeout);

hci_request_setup(hdev);

@@ -4068,6 +4088,8 @@ int hci_reset_dev(struct hci_dev *hdev)
hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
skb_put_data(skb, hw_err, 3);

+ bt_dev_err(hdev, "Injecting HCI hardware error event");
+
/* Send Hardware Error to upper stack */
return hci_recv_frame(hdev, skb);
}
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index cf2f4a0abdbd..479fdcb437e4 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -3270,6 +3270,23 @@ static void hci_remote_features_evt(struct hci_dev *hdev,
hci_dev_unlock(hdev);
}

+static inline void handle_cmd_cnt_and_timer(struct hci_dev *hdev,
+ u16 opcode, u8 ncmd)
+{
+ if (opcode != HCI_OP_NOP)
+ cancel_delayed_work(&hdev->cmd_timer);
+
+ if (!test_bit(HCI_RESET, &hdev->flags)) {
+ if (ncmd) {
+ cancel_delayed_work(&hdev->ncmd_timer);
+ atomic_set(&hdev->cmd_cnt, 1);
+ } else {
+ schedule_delayed_work(&hdev->ncmd_timer,
+ HCI_NCMD_TIMEOUT);
+ }
+ }
+}
+
static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
u16 *opcode, u8 *status,
hci_req_complete_t *req_complete,
@@ -3632,11 +3649,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
break;
}

- if (*opcode != HCI_OP_NOP)
- cancel_delayed_work(&hdev->cmd_timer);
-
- if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags))
- atomic_set(&hdev->cmd_cnt, 1);
+ handle_cmd_cnt_and_timer(hdev, *opcode, ev->ncmd);

hci_req_cmd_complete(hdev, *opcode, *status, req_complete,
req_complete_skb);
@@ -3737,11 +3750,7 @@ static void hci_cmd_status_evt(struct hci_dev *hdev, struct sk_buff *skb,
break;
}

- if (*opcode != HCI_OP_NOP)
- cancel_delayed_work(&hdev->cmd_timer);
-
- if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags))
- atomic_set(&hdev->cmd_cnt, 1);
+ handle_cmd_cnt_and_timer(hdev, *opcode, ev->ncmd);

/* Indicate request completion if the command failed. Also, if
* we're not waiting for a special event and we get a success
--
2.31.1.527.g47e6f16901-goog
\
 
 \ /
  Last update: 2021-04-29 19:25    [W:0.039 / U:1.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site