lkml.org 
[lkml]   [2021]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 00/15] media: mtk-vcodec: support for MT8183 decoder
From
Date
Hi,

On 27.04.21 13:15, Alexandre Courbot wrote:
> This series adds support for the stateless API into mtk-vcodec, by first
> separating the stateful ops into their own source file, and introducing
> a new set of ops suitable for stateless decoding. As such, support for
> stateful decoders should remain completely unaffected.
>
> This series has been tested with both MT8183 and MT8173. Decoding was
> working for both chips, and in the case of MT8173 no regression has been
> noticed.

I am trying to test the decoder with this patchset using v4l2-ctl on mt8173.

I am trying to decode an h264 file into V4L2_PIX_FMT_MT21C format.
I am not able to do it. It seems that the driver expects each buffer to start
with a nal starting code, and the v4l2-ctl command just read the files into
buffers without any parsing.

Can you share the command and the files you used for testing?

Thank you,
Dafna

>
> Patches 1-9 add MT8183 support to the decoder using the stateless API.
> MT8183 only support H.264 acceleration.
>
> Patches 10-15 are follow-ups that further improve compliance for the
> decoder and encoder, by fixing support for commands on both. Patch 11
> also makes sure that supported H.264 profiles are exported on MT8173.
>
> Changes since v3:
> * Stop checking that controls are set for every request.
> * Add V4L2_CID_STATELESS_H264_START_CODE control.
> * Stop mapping OUTPUT buffers and getting the NAL type from them, use the
> nal_ref_idc field instead.
> * Make V4L2_CID_MIN_BUFFERS_FOR_CAPTURE control stateful-only.
> * Set vb2_buffer's field to V4L2_FIELD_NONE in buffer validation hook.
>
> Changes since v2:
> * Add follow-up patches fixing support for START/STOP commands for the
> encoder, and stateful decoder.
>
> Alexandre Courbot (8):
> media: mtk-vcodec: vdec: handle firmware version field
> media: mtk-vcodec: support version 2 of decoder firmware ABI
> media: add Mediatek's MM21 format
> dt-bindings: media: document mediatek,mt8183-vcodec-dec
> media: mtk-vcodec: vdec: use helpers in VIDIOC_(TRY_)DECODER_CMD
> media: mtk-vcodec: vdec: clamp OUTPUT resolution to hardware limits
> media: mtk-vcodec: make flush buffer reusable by encoder
> media: mtk-vcodec: venc: support START and STOP commands
>
> Hirokazu Honda (1):
> media: mtk-vcodec: vdec: Support H264 profile control
>
> Hsin-Yi Wang (1):
> media: mtk-vcodec: venc: make sure buffer exists in list before
> removing
>
> Yunfei Dong (5):
> media: mtk-vcodec: vdec: move stateful ops into their own file
> media: mtk-vcodec: vdec: support stateless API
> media: mtk-vcodec: vdec: support stateless H.264 decoding
> media: mtk-vcodec: vdec: add media device if using stateless api
> media: mtk-vcodec: enable MT8183 decoder
>
> .../bindings/media/mediatek-vcodec.txt | 1 +
> .../media/v4l/pixfmt-reserved.rst | 7 +
> drivers/media/platform/Kconfig | 2 +
> drivers/media/platform/mtk-vcodec/Makefile | 3 +
> .../platform/mtk-vcodec/mtk_vcodec_dec.c | 818 +++---------------
> .../platform/mtk-vcodec/mtk_vcodec_dec.h | 28 +-
> .../platform/mtk-vcodec/mtk_vcodec_dec_drv.c | 66 +-
> .../mtk-vcodec/mtk_vcodec_dec_stateful.c | 667 ++++++++++++++
> .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 370 ++++++++
> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 58 +-
> .../platform/mtk-vcodec/mtk_vcodec_enc.c | 135 ++-
> .../platform/mtk-vcodec/mtk_vcodec_enc_drv.c | 4 +
> .../mtk-vcodec/vdec/vdec_h264_req_if.c | 780 +++++++++++++++++
> .../media/platform/mtk-vcodec/vdec_drv_if.c | 3 +
> .../media/platform/mtk-vcodec/vdec_drv_if.h | 1 +
> .../media/platform/mtk-vcodec/vdec_ipi_msg.h | 23 +-
> .../media/platform/mtk-vcodec/vdec_vpu_if.c | 43 +-
> .../media/platform/mtk-vcodec/vdec_vpu_if.h | 5 +
> drivers/media/v4l2-core/v4l2-ioctl.c | 1 +
> include/uapi/linux/videodev2.h | 1 +
> 20 files changed, 2293 insertions(+), 723 deletions(-)
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateful.c
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
> create mode 100644 drivers/media/platform/mtk-vcodec/vdec/vdec_h264_req_if.c
>
> --
> 2.31.1.498.g6c1eba8ee3d-goog
>

\
 
 \ /
  Last update: 2021-04-29 14:08    [W:0.210 / U:0.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site