lkml.org 
[lkml]   [2021]   [Apr]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v8 7/9] net: phy: Add support for microchip SMI0 MDIO bus
Date
From: Andrew Lunn <andrew@lunn.ch>

SMI0 is a mangled version of MDIO. The main low level difference is
the MDIO C22 OP code is always 0, not 0x2 or 0x1 for Read/Write. The
read/write information is instead encoded in the PHY address.

Extend the bit-bang code to allow the op code to be overridden, but
default to normal C22 values. Add an extra compatible to the mdio-gpio
driver, and when this compatible is present, set the op codes to 0.

A higher level driver, sitting on top of the basic MDIO bus driver can
then implement the rest of the microchip SMI0 odderties.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>

---
v1 -> v2: - patch not present
v2 -> v3: - first patch
v3 -> v4: - added override_c22_op
v4 -> v5: - moved override_c22_op out of else case
---
drivers/net/mdio/mdio-bitbang.c | 8 ++++++--
drivers/net/mdio/mdio-gpio.c | 8 ++++++++
include/linux/mdio-bitbang.h | 3 +++
3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mdio/mdio-bitbang.c b/drivers/net/mdio/mdio-bitbang.c
index 0f457c436335..07609114a26b 100644
--- a/drivers/net/mdio/mdio-bitbang.c
+++ b/drivers/net/mdio/mdio-bitbang.c
@@ -158,7 +158,7 @@ int mdiobb_read(struct mii_bus *bus, int phy, int reg)
reg = mdiobb_cmd_addr(ctrl, phy, reg);
mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
} else
- mdiobb_cmd(ctrl, MDIO_READ, phy, reg);
+ mdiobb_cmd(ctrl, ctrl->op_c22_read, phy, reg);

ctrl->ops->set_mdio_dir(ctrl, 0);

@@ -190,7 +190,7 @@ int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
reg = mdiobb_cmd_addr(ctrl, phy, reg);
mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
} else
- mdiobb_cmd(ctrl, MDIO_WRITE, phy, reg);
+ mdiobb_cmd(ctrl, ctrl->op_c22_write, phy, reg);

/* send the turnaround (10) */
mdiobb_send_bit(ctrl, 1);
@@ -217,6 +217,10 @@ struct mii_bus *alloc_mdio_bitbang(struct mdiobb_ctrl *ctrl)
bus->read = mdiobb_read;
bus->write = mdiobb_write;
bus->priv = ctrl;
+ if (!ctrl->override_op_c22) {
+ ctrl->op_c22_read = MDIO_READ;
+ ctrl->op_c22_write = MDIO_WRITE;
+ }

return bus;
}
diff --git a/drivers/net/mdio/mdio-gpio.c b/drivers/net/mdio/mdio-gpio.c
index 56c8f914f893..0fb3c2de0845 100644
--- a/drivers/net/mdio/mdio-gpio.c
+++ b/drivers/net/mdio/mdio-gpio.c
@@ -132,6 +132,13 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev,
new_bus->phy_ignore_ta_mask = pdata->phy_ignore_ta_mask;
}

+ if (dev->of_node &&
+ of_device_is_compatible(dev->of_node, "microchip,mdio-smi0")) {
+ bitbang->ctrl.op_c22_read = 0;
+ bitbang->ctrl.op_c22_write = 0;
+ bitbang->ctrl.override_op_c22 = 1;
+ }
+
dev_set_drvdata(dev, new_bus);

return new_bus;
@@ -196,6 +203,7 @@ static int mdio_gpio_remove(struct platform_device *pdev)

static const struct of_device_id mdio_gpio_of_match[] = {
{ .compatible = "virtual,mdio-gpio", },
+ { .compatible = "microchip,mdio-smi0" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mdio_gpio_of_match);
diff --git a/include/linux/mdio-bitbang.h b/include/linux/mdio-bitbang.h
index aca4dc037b70..373630fe5c28 100644
--- a/include/linux/mdio-bitbang.h
+++ b/include/linux/mdio-bitbang.h
@@ -33,6 +33,9 @@ struct mdiobb_ops {

struct mdiobb_ctrl {
const struct mdiobb_ops *ops;
+ unsigned int override_op_c22;
+ u8 op_c22_read;
+ u8 op_c22_write;
};

int mdiobb_read(struct mii_bus *bus, int phy, int reg);
--
2.29.2
\
 
 \ /
  Last update: 2021-04-27 09:11    [W:0.110 / U:6.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site