lkml.org 
[lkml]   [2021]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/1] sched/fair: Fix unfairness caused by missing load decay
On Sun, 25 Apr 2021 at 10:11, Odin Ugedal <odin@uged.al> wrote:
>
> TL;DR: Read the patch msg first; hopefully it makes sense. Feel free
> to cc more relevant people, and (as I am pretty new to this) feedback
> is highly appreciated!
>
> I thought it was smart to split the discussion of the patch and the issuse, so
> here is some (wall of text, sorry) discussion around it:
>
> This patch fixes an extremely strange edge case, discovered more or less by
> accident, where the fairness of the cfs scheduler get skewed quite
> extensively. This often leads to two cgroups who are supposed to get
> share cpu time 50/50, instead getting something like 90/10 or
> even 99/1 (!!) in some rare cases (see below for example). I find this
> edge case quite interesting, especially since I am able to so easily
> reproduce it on all machines and all (4.8+) kernels.
>
> The issue can be easily reproduced on all kernels 4.8+, and afaik. most
> "container runtimes" are affected. I do believe that I have wondered about
> this issue earlier, but not actually understood what was causing it. There
> is really (afaik.) no way to find the issue from userspace without using
> a tracing tool like bpftrace. I am _sure_ this affects real production
> environments _everywhere_, at least those running the normal container/using
> cgroup tools together with cpu pinning; but verifying that the
> fairness is skewed is quite hard, or more or less impossible in such cases,
> especially when running multiple workloads simultaneously. I did inspect some
> of my production servers, and found a set of this on multiple cgroups.
>
> It _is_ possible to read '/proc/sched_debug', but since that list only prints
> the cfs_rq's from "leaf_cfs_rq_list", the cfs_rq's we are _really_ looking for,
> are missing; making it look like the problem isn't becuase of cfs.
>
> I think the current patch is the best way solve the issue, but I will happily
> discuss other possible solutions. One could also just "don't" propagate the
> load to the task_group, but I think the current implementation on that part
> is the correct way to do it. This is at least my best solution to avoid adding
> logic to a "hotter" path that also would require more logic.
>
> The only thing I am thinking a bit about is if the cfs_rq (or one of its ancestors) is
> throttled. In case the cfs_rq->throttled==1, I don't think we currently can skip, since
> it only adds to the leaf_list in case (cfs_rq->nr_running >= 1), and the same applies for
> (cfs_rq->throttle_count >= 1), since we cannot guarantee that it will be added again. Will
> this code however interfere with the throttling mechanism? I have tested inserting new procs
> to throttled cgroups (or children cgroups of throttled ones) with the patch applied,
> and it works as I expect it to do (but other people might have more insight).
>
> Also, another solution may be to don't add the load before the task is actually
> enqueued, avoiding this issue all together. But is that better (I assume that will
> be more in the "hot path", and require quite a bit more code)?
>
> There may definetly be a better solution to this that I still haven't found, and that
> other more experienced kernel devs see right away. :)
>
>
> Also feel free to suggest additions/wording of the patch
> message and title, and/or the comment in the code to make it more clear.
>
> This issue was introduced in 4.8, so all stable (4.9+) releases should probably
> get this (the final solution at least), or?
>

Have you been able to reproduce this on mainline ?

>
>
> Below is various ways/scripts to reproduce - sorry this is so long (and
> sorry for bash in general), but thought people might be interested in them:
>
> note: due to the nature of the issue, the "lost" load is different each time, so
> the values change each time, and sometimes/often end up at ~50/50; but my testing
> shows that it keep happening almost every time:
>
>
> Example on cgruoup v1. Often results in 60/40 load:
> USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
> root 18026 63.0 0.0 3676 100 pts/7 R+ 13:09 0:06 stress --cpu 1
> root 18036 36.6 0.0 3676 100 pts/7 R+ 13:09 0:04 stress --cpu 1

When running the script below on v5.12, I'm not able to reproduce your problem

> --- bash start
> CGROUP_CPU=/sys/fs/cgroup/cpu/slice
> CGROUP_CPUSET=/sys/fs/cgroup/cpuset/slice
> CPU=0
>
> function run_sandbox {
> local CG_CPUSET="$1"
> local CG_CPU="$2"
> local CMD="$3"
>
> local PIPE="$(mktemp -u)"
> mkfifo "$PIPE"
> sh -c "read < $PIPE ; exec $CMD" &
> local TASK="$!"
> sleep .1
> mkdir -p "$CG_CPUSET"
> mkdir -p "$CG_CPU"
> tee "$CG_CPU"/cgroup.procs <<< "$TASK"
>
> tee "$CG_CPUSET"/cgroup.procs <<< "$TASK"
>
> tee "$PIPE" <<< sandox_done
> rm "$PIPE"
> }
>
> mkdir -p "$CGROUP_CPU"
> mkdir -p "$CGROUP_CPUSET"
> tee "$CGROUP_CPUSET"/cpuset.cpus <<< "0"
> tee "$CGROUP_CPUSET"/cpuset.mems <<< "0"
>
> run_sandbox "$CGROUP_CPUSET" "$CGROUP_CPU/cg-1" "stress --cpu 1"
> run_sandbox "$CGROUP_CPUSET" "$CGROUP_CPU/cg-2" "stress --cpu 1"
>
> read # click enter to cleanup
> killall stress
> sleep .2
> rmdir /sys/fs/cgroup/cpuset/slice/
> rmdir /sys/fs/cgroup/cpu/slice/{cg-1,cg-2,}
> --- bash end
>
> Example on cgroup v2 with sub cgroup (same as described in commit message),
> where both should get 50/50, but instead getting 99% and 1% (!!).
>
> USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
> root 18568 1.1 0.0 3684 100 pts/12 R+ 13:36 0:00 stress --cpu 1
> root 18580 99.3 0.0 3684 100 pts/12 R+ 13:36 0:09 stress --cpu 1
>
> (in case of systemd on vg v2- make sure some slice/scope is delegated(?)/use
> cpusets, otherwise systemd will fight you)
> --- bash start
> CGROUP_CPU=/sys/fs/cgroup/cpu/slice
> CGROUP_CPUSET=/sys/fs/cgroup/cpuset/slice
> CPU=0
>
> function run_sandbox {
> local CG_CPUSET="$1"
> local CG_CPU="$2"
> local CMD="$3"
>
> local PIPE="$(mktemp -u)"
> mkfifo "$PIPE"
> sh -c "read < $PIPE ; exec $CMD" &
> local TASK="$!"
> sleep .01
> mkdir -p "$CG_CPUSET"
> mkdir -p "$CG_CPU"
> tee "$CG_CPU"/cgroup.procs <<< "$TASK"
>
> tee "$CG_CPUSET"/cgroup.procs <<< "$TASK"
>
> tee "$PIPE" <<< sandox_done
> rm "$PIPE"
> }
>
> mkdir -p "$CGROUP_CPU"
> mkdir -p "$CGROUP_CPUSET"
> tee "$CGROUP_CPUSET"/cpuset.cpus <<< "0"
> tee "$CGROUP_CPUSET"/cpuset.mems <<< "0"
>
> run_sandbox "$CGROUP_CPUSET" "$CGROUP_CPU/cg-1" "stress --cpu 1"
> run_sandbox "$CGROUP_CPUSET" "$CGROUP_CPU/cg-2" "stress --cpu 1"
>
> read # click enter to cleanup
> killall stress
> sleep .2
> rmdir /sys/fs/cgroup/cpuset/slice/
> rmdir /sys/fs/cgroup/cpu/slice/{cg-1,cg-2,}
> --- bash end
>
>
>
> For those who only want to run docker stuff:
> (on cgroup v1, you must use systemd driver)
> USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
> root 9291 60.1 0.0 7320 96 pts/0 R+ 13:18 0:07 /usr/bin/stress --verbose --cpu 1
> root 9388 45.5 0.0 7320 96 pts/0 R+ 13:18 0:04 /usr/bin/stress --verbose --cpu 1
> --- bash start
> docker run --cpuset-cpus=0 --rm -it an-image-with-stress
> docker run --cpuset-cpus=0 --rm -it an-image-with-stress
> --- bash end
>
>
> Here is a bpftrace script that can show what is happening (again. sorry for bash,
> but bpftrace only allow constants as array indexes as of now, so this is the best I can do).
> This script also needs bpftrace v0.13 (not released as of now, so currently you have
> to compile master) or newer.
>
>
> --- bash start
> PROBE='kfunc:sched_group_set_shares{
> printf("cgroup: %s/%s\n",
> str(args->tg->css.cgroup->kn->parent->name),
> str(args->tg->css.cgroup->kn->name));
> printf(
> "cpu load.weight avg.load_avg removed.load_avg removed.nr removed.on_list tg_load_avg_contrib tg->load_avg\n"
> );
> }'
> for i in $(seq 0 $(($(nproc)-1))); do
> PROBE="$PROBE""$(sed "s/cpu_nr/$i/" <<<' kfunc:sched_group_set_shares{
> printf("%-4d %-12llu %-13llu %-17llu %-11d %-16d %-20llu %d\n",
> cpu_nr,
> (args->tg->cfs_rq[cpu_nr])->load.weight,
> (args->tg->cfs_rq[cpu_nr])->avg.load_avg,
> (args->tg->cfs_rq[cpu_nr])->removed.load_avg,
> (args->tg->cfs_rq[cpu_nr])->removed.nr,
> (args->tg->cfs_rq[cpu_nr])->on_list,
> (args->tg->cfs_rq[cpu_nr])->tg_load_avg_contrib,
> args->tg->load_avg.counter
> );
> }')"
> done
> PROBE="$PROBE"'kfunc:sched_group_set_shares{
> printf("\n");
> }'
>
> bpftrace -e "$PROBE"
> --- bash end
>
>
> When running the bpftrace script when the sub cgroup example is running, and
> executing (just setting the weight of the cgroup the same value as before, no change):
>
> --- bash start
> tee /sys/fs/cgroup/slice/cg-1/sub/cpu.weight <<< 1
> tee /sys/fs/cgroup/slice/cg-2/sub/cpu.weight <<< 10000
> tee /sys/fs/cgroup/slice/cg-1/cpu.weight <<< 100
> tee /sys/fs/cgroup/slice/cg-2/cpu.weight <<< 100
> --- bash end
>
> the output is:
>
> --- output start
> Attaching 6 probes...
> cgroup: cg-1/sub
> cpu load.weight avg.load_avg removed.load_avg removed.nr removed.on_list tg_load_avg_contrib tg->load_avg
> 0 1048576 1023 0 0 1 1034 1662
> 1 0 0 0 0 0 0 1662
> 2 0 0 0 0 0 0 1662
> 3 0 628 628 1 0 628 1662
>
> cgroup: cg-2/sub
> cpu load.weight avg.load_avg removed.load_avg removed.nr removed.on_list tg_load_avg_contrib tg->load_avg
> 0 1048576 1023 0 0 1 1023 1830
> 1 0 0 0 0 0 0 1830
> 2 0 0 0 0 0 0 1830
> 3 0 807 807 1 0 807 1830
>
> cgroup: slice/cg-1
> cpu load.weight avg.load_avg removed.load_avg removed.nr removed.on_list tg_load_avg_contrib tg->load_avg
> 0 6347 5 0 0 1 5 593
> 1 0 0 0 0 0 0 593
> 2 0 0 0 0 0 0 593
> 3 0 5 0 0 0 588 593
>
> cgroup: slice/cg-2
> cpu load.weight avg.load_avg removed.load_avg removed.nr removed.on_list tg_load_avg_contrib tg->load_avg
> 0 58642371 57263 0 0 1 57909 58665
> 1 0 0 0 0 0 0 58665
> 2 0 0 0 0 0 0 58665
> 3 0 75615 0 0 0 756 58665
>
> --- output end
>
> We can clearly see that both cg-1/sub and cg-2/sub have removed.nr==1 on cpu 3,
> and therefore still contribute to the tg->load_avg. Since removed.on_list==0, the load would
> never be "cleaned" up unless a new task starts on that cpu, but due to the cpuset, that would not
> be the case. slice/cg-1 and slice/cg-2 also have load attached to cpu 3 that isn't removed (but
> the patch will properly decay the load on them as well).
>
> With this path, all of these examples just end up sharing cpu time in a fair 50/50 way, as expected.
>
> Odin Ugedal (1):
> sched/fair: Fix unfairness caused by missing load decay
>
> kernel/sched/fair.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> --
> 2.31.1
>

\
 
 \ /
  Last update: 2021-04-26 16:59    [W:0.180 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site